[
[1] Aboshi,H, Ichimoto, E, Enoki M and Harada, K 1979. The “composer”, a method to improve characteristics of soft clay by inclusion of large diameter sand columns, .R. International symposium. on soil building: Army Land and other methods 1, 211-216
]Search in Google Scholar
[
[2] Airey, D. W., Al-Douri, R. H., Poulos, H. G. (1992). Estimation of pile friction degradation from shearboxtests. Geotechnical Testing Journal 15(4): 388-392
]Search in Google Scholar
[
[3] Axelson, G. (2000). Long-term set-up of driven piles in sand, PhD Thesis, Department of civil and Environmental Engineering: Stockholm Royal Institute of Technology
]Search in Google Scholar
[
[4] Foray P. (1991). Scale and Boundary Effects on Calibration Chamber Pile Test, Calibration ChamberTesting, pag 147-160
]Search in Google Scholar
[
[5] Jardine, R.J., Zhu, B.T, Foray, P., & Dalton, C.P. (2009). Experimental arrangements for the investigation of soil stresses developed around a displacement pile Soil and Foundations 49(5) pp. 661-673
]Search in Google Scholar
[
[6] Bullock, P.J., Schmertmann, J.H., McVay, M.C. & Townsend, F.C. (2005). Side Shear Setup. I: Test Piles Driven in Florida. Journal of Geotechnical and Geoenvironmental Engineering131(3): 292-300
]Search in Google Scholar
[
[7] Bowman, E, T, and Soga, K, (2005), Mechanisms of set-up of displacement piles in sand: Laboratory creep tests, Canadian Geotechnical Journal 42(5): 1391-140710.1139/t05-063
]Search in Google Scholar
[
[8] Yang, Z, X, Jardine, R, J, Zhu, B, T, Foray P and Tsuha, C, H, C,(2010): Sand grain crushing and interface shearing during displacement pile installation in sand in Press for publication in the Géotechnique Themed Issue10.1680/geot.2010.60.6.469
]Search in Google Scholar
[
[9] Chow, F, C, Jardine R, G, Brucy, F, and Nauroy, J, F (1998): Effect of time on capacity of pipe piles in dense marine sand. Journal of Geotechnical and Geoenvironmental Engineering, ASCE 124(3): 254-26410.1061/(ASCE)1090-0241(1998)124:3(254)
]Search in Google Scholar
[
[10] Chan, S, and Hanna, T, H, (1980): Repeated loading on single piles in sand American Society of civil Engineering Division: 106(2): 171-18810.1061/AJGEB6.0000920
]Search in Google Scholar
[
[11] Mokrani, L;(1991) Simulation physique de comportement de pieux à grande profondeur en chamber de calibration, thése de doctorat à INPG, Grenoble
]Search in Google Scholar
[
[12] Altaee,A,Fellenus,B,H,Eving,E,(1992) Axial load transfer for pile in sand I&II, Canada geotechnical J.2910.1139/t92-002
]Search in Google Scholar
[
[13] Zelikson, a leguay, P (1986). Some basic data on piles under statique and dynamique loading from stress conserving models.Proc of 3rd int.conf on Numerical methods in offshore Piling Nante, pp.105-124
]Search in Google Scholar
[
[14] De Nicolas, a; Randolph,mf(1993); tensile and compressive shaft capacity of piles in sand, JGE,vol 119 n°210.1061/(ASCE)0733-9410(1993)119:12(1952)
]Search in Google Scholar
[
[15] Benyaghla H (2009), Calculating the rupture of pile under static loading by method of analysis, World journal of Engineering 10(02) (2013) 145-15810.1260/1708-5284.10.2.145
]Search in Google Scholar
[
[16] Baligh, M (1975). Cavity expansion insand with curved envellopes, journal of the Soil Mechanic and Fondations Division,ASCE,vol.102,N°GT11
]Search in Google Scholar
