<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Climatic and traffic effects are the causes of aging of the surface layer of asphalt, which leads to the necessary renovation of the latter. The use of waste from the tread layer provides a viable and beneficial solution for the environment and the economy. However, this solution must meet the requirement of sustainable development, which necessitates that a road has a very long lifespan. In this study we investigated the performance of recycled asphalt in terms of fatigue (as an element of life-cycle control). All the formulas were tested by the fatigue test in order to define the influence of the proportions of the asphalt aggregates, penetrability of the new binder used, and the manufacturing temperature. The results obtained showed the relationship between the contribution binder (reproduced between the new binder and the old binder) and the fatigue resistance under the influence of the parameters that we have mentioned above. At the end an optimization study has been carried in order to determine exactly the doses required to formulate recycled asphalt resisted to fatigue, the optimization seeks to maximize the asphalt aggregates and minimized the temperature of manufacture with a class of the binder compatible.</p></abstract>

Climatic and traffic effects are the causes of aging of the surface layer of asphalt, which leads to the necessary renovation of the latter. The use of waste from the tread layer provides a viable and beneficial solution for the environment and the economy. However, this solution must meet the requirement of sustainable development, which necessitates that a road has a very long lifespan. In this study we investigated the performance of recycled asphalt in terms of fatigue (as an element of life-cycle control). All the formulas were tested by the fatigue test in order to define the influence of the proportions of the asphalt aggregates, penetrability of the new binder used, and the manufacturing temperature. The results obtained showed the relationship between the contribution binder (reproduced between the new binder and the old binder) and the fatigue resistance under the influence of the parameters that we have mentioned above. At the end an optimization study has been carried in order to determine exactly the doses required to formulate recycled asphalt resisted to fatigue, the optimization seeks to maximize the asphalt aggregates and minimized the temperature of manufacture with a class of the binder compatible.

Influence of the penetrability of the new bitumen and the temperature of manufacture on the resistance of the asphalt recycled to the fatigue

Selected Scientific Papers - Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Climatic and traffic effects are the causes of aging of the surface layer of asphalt, which leads to the necessary renovation of the latter. The use of waste...

Influence of the penetrability of the new bitumen and the temperature of manufacture on the resistance of the asphalt recycled to the fatigue

Data publikacji: 18 sty 2019

Zakres stron: 39 - 50

DOI: https://doi.org/10.1515/sspjce-2018-0018

Słowa kluczowe
Asphalt, fatigue, Binder, Environment, Penetrability

© 2019 Bordjiba Abdelhak, Guenfoud Hamza, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of the penetrability of the new bitumen and the temperature of manufacture on the resistance of the asphalt recycled to the fatigue

Data publikacji: 18 sty 2019

Zakres stron: 39 - 50

DOI: https://doi.org/10.1515/sspjce-2018-0018

Słowa kluczoweAsphalt, fatigue, Binder, Environment, Penetrability

© 2019 Bordjiba Abdelhak, Guenfoud Hamza, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
Asphalt, fatigue, Binder, Environment, Penetrability