<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Although the designed theoretical value of U can be derived from the thermal parameters of layers composing an opaque element, according to ISO 6946:2007, measurements are necessary to confirm the expected behaviour. Currently, the measurements of thermal transmittance based on Heat Flow Meter method (HFM) and according to standard ISO 9869-1:2014 are widely accepted. Anyway, some issues related to difficulties in measurements are present: the roughness of wall surfaces, the proper contact between the heat flow plate and the temperature probes with wall surfaces, undesired changes in weather conditions. This work presents the results obtained in thermal transmittance measurements with a modified HFM method, widely described in this paper. Differences between U-values obtained with the modified HFM method and theoretical ones were in the range 0.6 - 6.5 %. Moreover, the modified HFM method provided a result closer to the theoretical one, when compared to that obtained with standard HFM method (discrepancy with theoretical value were 0.6% and 16.4%, respectively).</p></abstract>

Although the designed theoretical value of U can be derived from the thermal parameters of layers composing an opaque element, according to ISO 6946:2007, measurements are necessary to confirm the expected behaviour. Currently, the measurements of thermal transmittance based on Heat Flow Meter method (HFM) and according to standard ISO 9869-1:2014 are widely accepted. Anyway, some issues related to difficulties in measurements are present: the roughness of wall surfaces, the proper contact between the heat flow plate and the temperature probes with wall surfaces, undesired changes in weather conditions. This work presents the results obtained in thermal transmittance measurements with a modified HFM method, widely described in this paper. Differences between U-values obtained with the modified HFM method and theoretical ones were in the range 0.6 - 6.5 %. Moreover, the modified HFM method provided a result closer to the theoretical one, when compared to that obtained with standard HFM method (discrepancy with theoretical value were 0.6% and 16.4%, respectively).

Improved Thermal Transmittance Measurement with HFM Technique on Building Envelopes in the Mediterranean Area

Selected Scientific Papers - Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Although the designed theoretical value of U can be derived from the thermal parameters of layers composing an opaque element, according to ISO 6946:2007,...

Improved Thermal Transmittance Measurement with HFM Technique on Building Envelopes in the Mediterranean Area

Data publikacji: 20 sty 2017

Zakres stron: 39 - 52

DOI: https://doi.org/10.1515/sspjce-2016-0017

Słowa kluczowe
thermal transmittance, heat flow meter, opaque element, buildings

© 2017 Patrizia Aversa et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Improved Thermal Transmittance Measurement with HFM Technique on Building Envelopes in the Mediterranean Area

Data publikacji: 20 sty 2017

Zakres stron: 39 - 52

DOI: https://doi.org/10.1515/sspjce-2016-0017

Słowa kluczowethermal transmittance, heat flow meter, opaque element, buildings

© 2017 Patrizia Aversa et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
thermal transmittance, heat flow meter, opaque element, buildings