<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Three types of apartment claddings in Surabaya, Indonesia were studied to analyze their effect into bedroom temperature. They were glass windows in a niche, glass door in a balcony, and glass windows on a plain wall with glass door in a balcony. On-site temperature measurement was recorded and complemented with questionnaire surveys of occupants’ perception regarding room temperature. The study showed that an apartment cladding with the largest proportion of opaque material combined with a balcony offered an indoor temperature of up to 9 °C lower than the outdoor compared to the other cladding types. Nevertheless, 72 % of occupants participated in this study, who use air conditioners during night time, including one with the cladding with the largest temperature difference claimed that the indoor temperature before air-conditioners was still too warm, which triggered air-conditioners initial time more than 10 minutes to achieve the desired indoor temperature. It indicated that the opaque material time lag played a significant role in heating the room during night time when the air-conditioner is about to be operated.</p></abstract>

Three types of apartment claddings in Surabaya, Indonesia were studied to analyze their effect into bedroom temperature. They were glass windows in a niche, glass door in a balcony, and glass windows on a plain wall with glass door in a balcony. On-site temperature measurement was recorded and complemented with questionnaire surveys of occupants’ perception regarding room temperature. The study showed that an apartment cladding with the largest proportion of opaque material combined with a balcony offered an indoor temperature of up to 9 °C lower than the outdoor compared to the other cladding types. Nevertheless, 72 % of occupants participated in this study, who use air conditioners during night time, including one with the cladding with the largest temperature difference claimed that the indoor temperature before air-conditioners was still too warm, which triggered air-conditioners initial time more than 10 minutes to achieve the desired indoor temperature. It indicated that the opaque material time lag played a significant role in heating the room during night time when the air-conditioner is about to be operated.

Wall Cladding Effects and Occupants’ Perception of Indoor Temperature of Typical Student Apartments in Surabaya, Indonesia

Environmental and Climate Technologies

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Three types of apartment claddings in Surabaya, Indonesia were studied to analyze their effect into bedroom temperature. They were glass windows in a niche,...

Wall Cladding Effects and Occupants’ Perception of Indoor Temperature of Typical Student Apartments in Surabaya, Indonesia

Article Category: Issue Title: Special Issue

Data publikacji: 30 lis 2017

Zakres stron: 51 - 66

DOI: https://doi.org/10.1515/rtuect-2017-0010

Słowa kluczowe
Apartment, cladding, temperature, perception, Surabaya

© Riga Technical University

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Wall Cladding Effects and Occupants’ Perception of Indoor Temperature of Typical Student Apartments in Surabaya, Indonesia

Article Category: Issue Title: Special Issue

Data publikacji: 30 lis 2017

Zakres stron: 51 - 66

DOI: https://doi.org/10.1515/rtuect-2017-0010

Słowa kluczoweApartment, cladding, temperature, perception, Surabaya

© Riga Technical University

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
Apartment, cladding, temperature, perception, Surabaya