<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper is focused on the effect of generator’s parameters on the stability of WEDM process that is expressed by the length of time of cutting until the wire electrode breaks. This paper provides an overview of the current research articles dealing with the causes of the wire electrode’s rupture and the options of control and regulation of the process. The aim was to clarify the impact of input parameters to the cutting process, and to find those parameters making the process as fast as possible and stable. The experiment was performed on the machine of Agie Charmilles Robofil 310. As input factors were selected pulse width, time between two pulses, servo voltage, pulse current, short pulse time and frequency. Due to the fact that it is necessary to assess the impact of several input parameters, Taguchi experimental design was selected. L27 matrix was used. The Analysis of Variance (ANOVA) was used for evaluation.</p></abstract>

This paper is focused on the effect of generator’s parameters on the stability of WEDM process that is expressed by the length of time of cutting until the wire electrode breaks. This paper provides an overview of the current research articles dealing with the causes of the wire electrode’s rupture and the options of control and regulation of the process. The aim was to clarify the impact of input parameters to the cutting process, and to find those parameters making the process as fast as possible and stable. The experiment was performed on the machine of Agie Charmilles Robofil 310. As input factors were selected pulse width, time between two pulses, servo voltage, pulse current, short pulse time and frequency. Due to the fact that it is necessary to assess the impact of several input parameters, Taguchi experimental design was selected. L27 matrix was used. The Analysis of Variance (ANOVA) was used for evaluation.

The Stability of Wedm

Institute of Production Technologies, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Ulica Jána Bottu 2781/25, 917 24 Trnava, Slovak Republic

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"The Stability of Wedm"}

This paper is focused on the effect of generator’s parameters on the stability of WEDM process that is expressed by the length of time of cutting until the...

The Stability of Wedm

Data publikacji: 04 kwi 2017

Zakres stron: 67 - 72

DOI: https://doi.org/10.1515/rput-2016-0040

Słowa kluczowe
stability, WEDM, Material Removal Rate, ANOVA, Taguchi

© 2016 Vladimír Šimna, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Stability of Wedm

Data publikacji: 04 kwi 2017

Zakres stron: 67 - 72

DOI: https://doi.org/10.1515/rput-2016-0040

Słowa kluczowestability, WEDM, Material Removal Rate, ANOVA, Taguchi

© 2016 Vladimír Šimna, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
stability, WEDM, Material Removal Rate, ANOVA, Taguchi