<abstract xmlns="http://www.w3.org/1999/xhtml"><p> For evaluation of the effective focal spot sizes (EFSS), a method suggested by the EN 60336:2005 standard (standard) could be used. In this study we checked whether it is possible to make some deviations from the requirements of the standard without a significant effect on the result. An image receptor with one intensifying screen or two intensifying screens may be used, but the optical value of the slit image shall be in the range of 1.0÷1.4 and the X-ray tube power shall be ranged of about 30%÷50% of the nominal anode input power. A precision scaled magnifier (magnification of 5÷10x and scale of 0.1 mm) may be used for the slit radiogram width measurement instead of a time-consuming scanning of the slit radiogram. These deviations from the requirements of the EN 60336:2005 standard allows to shorten measurement time and to decrease tube current value during X-ray exposures, which reduces the risk of the Xray tube damage.</p></abstract>

For evaluation of the effective focal spot sizes (EFSS), a method suggested by the EN 60336:2005 standard (standard) could be used. In this study we checked whether it is possible to make some deviations from the requirements of the standard without a significant effect on the result. An image receptor with one intensifying screen or two intensifying screens may be used, but the optical value of the slit image shall be in the range of 1.0÷1.4 and the X-ray tube power shall be ranged of about 30%÷50% of the nominal anode input power. A precision scaled magnifier (magnification of 5÷10x and scale of 0.1 mm) may be used for the slit radiogram width measurement instead of a time-consuming scanning of the slit radiogram. These deviations from the requirements of the EN 60336:2005 standard allows to shorten measurement time and to decrease tube current value during X-ray exposures, which reduces the risk of the Xray tube damage.

Estimation of the effective focal spot sizes in medical diagnostic X-ray tube assemblies

Medical Physics Department, The Maria Skłodowska-Curie Memorial Cancer Center and Institute of Oncology, W. K. Roentgena 5, 02-781 Warsaw, Poland

Polish Journal of Medical Physics and Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

For evaluation of the effective focal spot sizes (EFSS), a method suggested by the EN 60336:2005 standard (standard) could be used. In this study we checked...

Estimation of the effective focal spot sizes in medical diagnostic X-ray tube assemblies

Data publikacji: 02 lip 2016

Zakres stron: 25 - 33

DOI: https://doi.org/10.1515/pjmpe-2016-0006

Słowa kluczowe
effective focal spot size, X-ray tube assembly, slit camera, quality control, slit radiogram

© Polish Society of Medical Physics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Estimation of the effective focal spot sizes in medical diagnostic X-ray tube assemblies

Data publikacji: 02 lip 2016

Zakres stron: 25 - 33

DOI: https://doi.org/10.1515/pjmpe-2016-0006

Słowa kluczoweeffective focal spot size, X-ray tube assembly, slit camera, quality control, slit radiogram

© Polish Society of Medical Physics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
effective focal spot size, X-ray tube assembly, slit camera, quality control, slit radiogram