[1. Jiang, D., Xu, H., Khan, H.I., Deng, B. & Zhang, N. (2017). Transport of corrosion products in the steam-water cycle of supercritical power plant. Therm. Engineer. 113, 1164–1169. DOI: 10.1016/j.applthermaleng.2016.11.119.10.1016/j.applthermaleng.2016.11.119]Search in Google Scholar
[2. Bilitewski, B., Härdtle, G. & Marek, K. (1994). Waste Management. Berlin Heidelberg, Germany: Springer-Verlag. ISBN: 3-540-59210-5.]Search in Google Scholar
[3. Obroučka, K. (2003). Thermal waste treatment and energy recovery. 1st edition. Ostrava: VSB-Technical University of Ostrava. ISBN 80-248-0009-8.]Search in Google Scholar
[4. Leskens, M., van Kessel, L.B.M. & Bosgra, O.H. (2005). Model predictive control as a tool for improving the process operation of MSW combustion plants. Waste Managem. 25, 8, 788–798. DOI: 10.1016/j.wasman.2005.03.005.10.1016/j.wasman.2005.03.00515896951]Search in Google Scholar
[5. Kuriger, R., Young, D., Mackenzie, M., Sarv, H. & Trembly, J. (2017). Phase analysis of scale deposition in boiler tubes utilizing steam-assisted gravity drainage produced water. J. Therm. Sci. Engineer. Appl. 9 (1), 011009. DOI: 10.1115/1.4034598.10.1115/1.4034598]Search in Google Scholar
[6. Raman, B., Hall, D.M., Shulder, S.J., Caravaggio, M.F. & Lvov, S.N. (2016). An experimental study of deposition of suspended magnetite in high temperature-high pressure boiler type environments. Coll.Surf. A: Physicochemical and Engineering Aspects. 508, 48–56. DOI: 10.1016/j.colsurfa.2016.08.018.10.1016/j.colsurfa.2016.08.018]Search in Google Scholar
[7. Gao, Z., Zhao, H., Fan, J., Yin, L. & Liao, Y. (2016). Study on structure optimization and heat-transfer characteristics of high-tennperature convective heating surface in pressurized oxy-fuel boilers. J. Chinese Soc. Power Engineer. 36(10), 773–780. ISSN: 16747607.]Search in Google Scholar
[8. Li, J., Zhai, Z., Wang, J. & Huang, S. (2016). On-line fouling monitoring model of condenser in coal-fired power plants. Therm. Engineer. 104, 628–635. DOI: 10.1016/j.applthermaleng.2016.04.131.10.1016/j.applthermaleng.2016.04.131]Search in Google Scholar
[9. Jalalirad, M.R., Abd-Elhady, M.S. & Malayeri, M.R. (2013). Cleaning action of spherical projectiles in tubular heat exchangers International. J. Heat Mass Trans. 57, (2), 491–499. DOI: 10.1016/j.ijheatmasstransfer.2012.10.071.10.1016/j.ijheatmasstransfer.2012.10.071]Search in Google Scholar
[10. Garba, M.U., Ingham, D.B., Ma, L., Degereji, M.U., Pourkashanian, M. & Wiliams, A. (2013). Modelling of deposit formation and sintering for the co-combustion of coal with biomass. Fuel 113(11), 863–872. DOI: 10.1016/j.fuel.2012.12.065.10.1016/j.fuel.2012.12.065]Search in Google Scholar
[11. Decree of the Czech Ministry of the Environment No 415/2012 Coll., on permissible level of pollution and the discovery and implementation of certain other provisions of the Clean Air Act (emission regulation).]Search in Google Scholar
[12. Li, J., Wang, P. & Cheng, L. (2016). Characteristics of ash deposition on a novel heat transfer surface. Huag. Xue./CIESC J. 67(9), 3598–3606. DOI: 10.11949/j.issn.0438-1157.20160232.]Search in Google Scholar
[13. Iannacone, M.M., Castle, J.W. & Rodgers, Jr., J.H. (2009). Characterization of flue gas desulfurization particulates in equalization basins. Fuel 88(9), 1580–1587. DOI: 10.1016/j.fuel.2009.02.035.10.1016/j.fuel.2009.02.035]Search in Google Scholar
[14. Bigham, J.M., Kost, D.A., Stehouwer, R.C., Beeghly, J.H., Fowler, R., Traina, S.J., Wolfe, W.E. & Dick, W.A. (2005). Mineralogical and engineering characteristics of dry flue gas desulfurization products. Fuel 84(14–15), 1839–1848. DOI: 10.1016/j.fuel.2005.03.018.10.1016/j.fuel.2005.03.018]Search in Google Scholar
[15. Zacco, A., Borgese, L., Gianoncelli, A., Depero, L.E. & Bontempi, E. (2014). Review of fly ash inertisation treatments and recycling. Environ. Chem. Lett. 12(1), 153–175. DOI: 10.1007/s10311-014-0454-6.10.1007/s10311-014-0454-6]Search in Google Scholar
[16. Fry, A., Adams, B., Davis, K., Swensen, D. & Cox, W. (2012). Fire-side corrosion of heat transfer surface materials with air- and oxy-coal combustion. In Air and Waste Management Association – Power Plant Air Pollutant Control “MEGA” Symposium 2012, Baltimore, MD, USA; 20–23rd August 2012.]Search in Google Scholar
[17. Alba, N., Gassó, S., Lacorte, T. & Baldasano, J.M. (1997). Characterization of Municipal Solid Waste incineration residues from facilities with different air pollution control systems. J. Air Waste Managem. Assoc. 47(11), 1170–1179. ISSN: 10962247.10.1080/10473289.1997.10464059]Search in Google Scholar
[18. Van Kessel, L.B.M., Leskens, M. & Brem, G. (2002). Calorific value sensor and validation of dynamic models applied to municipal solid waste combustion. IChemE The Chemical Engineer. 80 B5, 245–255. DOI: 10.1205/095758202762277605.10.1205/095758202762277605]Search in Google Scholar
[19. Breeding, Ch., Tandra, D. & Shah, S. (2010). Boiler Cleaning Using ISB (Intelligent Soot Blowing) System Integration. In ASME 2010 Power Conference, Chicago, USA, 13–15th July 2010.]Search in Google Scholar
[20. A.I.T. Drivex. (2003). Contre l’encrassement des chaudieres, Revue du Papier Carton, Issue 65, October 2003 (pp. 46–48).]Search in Google Scholar
[21. A.I.T. DRIVEX. Available on the website: <http://www.drivex.fr/Catalogue.htm>]Search in Google Scholar