<abstract xmlns="http://www.w3.org/1999/xhtml">The main purpose of this study was to develop a mathematical model, in a steady state and dynamic mode, of a Catalytic Partial Oxidation (CPOx) reformer – Solid Oxide Fuel Cell (SOFC) stack integrated system in order to assess the system performance. Mass balance equations were written for each component in the system together with energy equation and implemented into the MATLAB Simulink simulation tool. Temperature, gas concentrations, pressure and current density were computed in the steady-state mode and validated against experimental data. The calculated I–V curve matched well the experimental one. In the dynamic modelling, several different conditions including step changes in fuel flow rates, stack voltage as well as temperature values were applied to estimate the system response against the load variations. Results provide valuable insight into the operating conditions that have to be achieved to ensure efficient CPOx performance for fuel processing for the SOFC stack applications.</abstract>

The main purpose of this study was to develop a mathematical model, in a steady state and dynamic mode, of a Catalytic Partial Oxidation (CPOx) reformer – Solid Oxide Fuel Cell (SOFC) stack integrated system in order to assess the system performance. Mass balance equations were written for each component in the system together with energy equation and implemented into the MATLAB Simulink simulation tool. Temperature, gas concentrations, pressure and current density were computed in the steady-state mode and validated against experimental data. The calculated I–V curve matched well the experimental one. In the dynamic modelling, several different conditions including step changes in fuel flow rates, stack voltage as well as temperature values were applied to estimate the system response against the load variations. Results provide valuable insight into the operating conditions that have to be achieved to ensure efficient CPOx performance for fuel processing for the SOFC stack applications.

Model development of integrated CPOx reformer and SOFC stack system

West Pomeranian University of Technology, Szczecin, Faculty of Chemical Technology and Engineering, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin,

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Model development of integrated CPOx reformer and SOFC stack system"}

The main purpose of this study was to develop a mathematical model, in a steady state and dynamic mode, of a Catalytic Partial Oxidation (CPOx) reformer –...

Model development of integrated CPOx reformer and SOFC stack system

Data publikacji: 30 gru 2016

Zakres stron: 41 - 46

DOI: https://doi.org/10.1515/pjct-2016-0069

Słowa kluczowe
Catalytic Partial Oxidation (CPOx) reformer, Solid Oxide Fuel Cell (SOFC) stack, stead and dynamic mode, modelling

© 2016 Paulina Pianko-Oprych et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Model development of integrated CPOx reformer and SOFC stack system

Data publikacji: 30 gru 2016

Zakres stron: 41 - 46

DOI: https://doi.org/10.1515/pjct-2016-0069

Słowa kluczoweCatalytic Partial Oxidation (CPOx) reformer, Solid Oxide Fuel Cell (SOFC) stack, stead and dynamic mode, modelling

© 2016 Paulina Pianko-Oprych et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Catalytic Partial Oxidation (CPOx) reformer, Solid Oxide Fuel Cell (SOFC) stack, stead and dynamic mode, modelling