<abstract xmlns="http://www.w3.org/1999/xhtml"> A series of red-emitting phosphors InNbO4:Eu3+,Bi3+ was prepared by a high temperature solid-state reaction. The structure, size distribution and luminescence properties of the phosphors were respectively characterized by X-ray diffraction (XRD), laser particle size and molecular fluorescence spectrometer. The XRD results indicate that the phase-pure samples have been obtained and the crystal structure of the host has not changed under the Eu3+ and Bi3+ co-doping. The test of size distribution shows that the phosphor has a normal size distribution. The excitation spectra illustrate that the dominant sharp peaks are located at 394 nm (7F0→5L6) and 466 nm (7F0→5D2). Meanwhile, the emission spectra reveal that the phosphors excited by the wavelength of 394 nm or 466 nm have an intense red-emission line at 612 nm owing to the 5D0→7F2 transition of Eu3+. Bi3+ doping has not changed the peak positions except the photoluminescence intensity. The emission intensity is related to Bi3+ concentration, and it is up to the maximum when the Bi3+-doping concentration is 4 mol%. Due to good photoluminescence properties of the phosphor, the InNbO4:0.04Eu3+,0.04Bi3+ may be used as a red component for white light-emitting diodes.</abstract>

A series of red-emitting phosphors InNbO4:Eu3+,Bi3+ was prepared by a high temperature solid-state reaction. The structure, size distribution and luminescence properties of the phosphors were respectively characterized by X-ray diffraction (XRD), laser particle size and molecular fluorescence spectrometer. The XRD results indicate that the phase-pure samples have been obtained and the crystal structure of the host has not changed under the Eu3+ and Bi3+ co-doping. The test of size distribution shows that the phosphor has a normal size distribution. The excitation spectra illustrate that the dominant sharp peaks are located at 394 nm (7F0→5L6) and 466 nm (7F0→5D2). Meanwhile, the emission spectra reveal that the phosphors excited by the wavelength of 394 nm or 466 nm have an intense red-emission line at 612 nm owing to the 5D0→7F2 transition of Eu3+. Bi3+ doping has not changed the peak positions except the photoluminescence intensity. The emission intensity is related to Bi3+ concentration, and it is up to the maximum when the Bi3+-doping concentration is 4 mol%. Due to good photoluminescence properties of the phosphor, the InNbO4:0.04Eu3+,0.04Bi3+ may be used as a red component for white light-emitting diodes.

Influence of Bi3+ content on photoluminescence of InNbO4:Eu3+,Bi3+ for white light-emitting diodes

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of Bi content on photoluminescence of InNbO:Eu,Bi for white light-emitting diodes

A series of red-emitting phosphors InNbO4:Eu3+,Bi3+ was prepared by a high temperature solid-state reaction. The structure, size distribution and luminescence...

Influence of Bi³⁺ content on photoluminescence of InNbO₄:Eu³⁺,Bi³⁺ for white light-emitting diodes

Data publikacji: 26 lip 2017

Zakres stron: 435 - 439

Otrzymano: 05 gru 2016

Przyjęty: 25 kwi 2017

DOI: https://doi.org/10.1515/msp-2017-0053

Słowa kluczowe
red-emitting phosphor, photoluminescence properties, white LEDs, InNbO4, solid-state reaction

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of Bi3+ content on photoluminescence of InNbO4:Eu3+,Bi3+ for white light-emitting diodes

Data publikacji: 26 lip 2017

Zakres stron: 435 - 439

Otrzymano: 05 gru 2016

Przyjęty: 25 kwi 2017

DOI: https://doi.org/10.1515/msp-2017-0053

Słowa kluczowered-emitting phosphor, photoluminescence properties, white LEDs, InNbO4, solid-state reaction

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of Bi³⁺ content on photoluminescence of InNbO₄:Eu³⁺,Bi³⁺ for white light-emitting diodes

Słowa kluczowe
red-emitting phosphor, photoluminescence properties, white LEDs, InNbO4, solid-state reaction