<abstract xmlns="http://www.w3.org/1999/xhtml">In this investigation, Eu3+ doped YBO3 phosphors were synthesized by conventional solid state method at 1100°C under atmosphere condition. Meanwhile, different amounts of LiCl, BaCl2 and CaCl2 were used as the flux compounds to modify the morphology of the phosphor particles and also final luminescent properties. It was concluded that even small amounts of fluxes play a vital role in the growth of particles. Then the emission and excitation photoluminescence spectra were measured respectively at λexc = 240 nm and λem = 610 nm and it was found that using 2 wt.% of flux compounds has a significant influence on the emission intensity of YBO3 phosphors.</abstract>

In this investigation, Eu3+ doped YBO3 phosphors were synthesized by conventional solid state method at 1100°C under atmosphere condition. Meanwhile, different amounts of LiCl, BaCl2 and CaCl2 were used as the flux compounds to modify the morphology of the phosphor particles and also final luminescent properties. It was concluded that even small amounts of fluxes play a vital role in the growth of particles. Then the emission and excitation photoluminescence spectra were measured respectively at λexc = 240 nm and λem = 610 nm and it was found that using 2 wt.% of flux compounds has a significant influence on the emission intensity of YBO3 phosphors.

<div xmlns="http://www.w3.org/1999/xhtml"><sec id="j_msp-2016-0079_s_001_w2aab3b8d255b1b7b1ab1aAa"><label>1</label><div>Introduction</div>Red color luminescent materials based on phosphors are highly demanded in many fields of industry. Among them, RE (rare earth) doped orthoborate materials with a hexagonal crystal structure have attracted worldwide attention since they possess acceptable chemical stability and their ultraviolet (UV) transparency and vacuum ultraviolet (VUV) optical damage threshold are significant [<a ref-type="bibr" href="#j_msp-2016-0079_ref_014_w2aab3b8d255b1b7b1ab2b1c14Aa">14</a>]. So, they have been used as lamp and plasma display panels (PDP) for a long time. In the group of orthoborates, YBO3 has very notable luminescence properties when it is doped by Eu+3 [<a ref-type="bibr" href="#j_msp-2016-0079_ref_005_w2aab3b8d255b1b7b1ab2b1b5Aa">5</a>]. Since the morphology and particle size affect the luminescence behavior of phosphors, [<a ref-type="bibr" href="#j_msp-2016-0079_ref_006_w2aab3b8d255b1b7b1ab2b1b6Aa">6</a>, <a ref-type="bibr" href="#j_msp-2016-0079_ref_007_w2aab3b8d255b1b7b1ab2b1b7Aa">7</a>], so these materials have been synthesized via miscellaneous synthesizing methods, depending on desired final properties and applications. Many researchers have synthesized YBO3 luminescent materials by the conventional solid-state reaction (SR), wet process (WP), sol-gel (SG), solvothermal, hydrothermal and spray pyrolysis techniques [<a ref-type="bibr" href="#j_msp-2016-0079_ref_001_w2aab3b8d255b1b7b1ab2b1b1Aa">1</a>, <a ref-type="bibr" href="#j_msp-2016-0079_ref_006_w2aab3b8d255b1b7b1ab2b1b6Aa">6</a>, <a ref-type="bibr" href="#j_msp-2016-0079_ref_008_w2aab3b8d255b1b7b1ab2b1b8Aa">8</a>-<a ref-type="bibr" href="#j_msp-2016-0079_ref_011_w2aab3b8d255b1b7b1ab2b1c11Aa">11</a>].In case of synthesizing via solid state reaction, there are some drawbacks such as unacceptable crystallinity, heterogeneity and the need for high calcination temperatures. Hence, some reports of using flux compounds have been presented in order to solve the mentioned weak points [<a ref-type="bibr" href="#j_msp-2016-0079_ref_012_w2aab3b8d255b1b7b1ab2b1c12Aa">12</a>-<a ref-type="bibr" href="#j_msp-2016-0079_ref_015_w2aab3b8d255b1b7b1ab2b1c15Aa">15</a>]. Due to the fact that the melting point of a flux is lower than the solid-state reaction temperature, it may facilitate the reaction process of the compounds without participating in the reaction [<a ref-type="bibr" href="#j_msp-2016-0079_ref_016_w2aab3b8d255b1b7b1ab2b1c16Aa">16</a>]. Alkaline earth metals with low melting temperatures have been used frequently in flux compounds and the most common fluxes are based on halides [<a ref-type="bibr" href="#j_msp-2016-0079_ref_017_w2aab3b8d255b1b7b1ab2b1c17Aa">17</a>].In this paper, Eu3+ doped YBO3 phosphor was produced by solid state synthesis method. We evaluated also the effect of lithium, barium and calcium chlorides (LiCl, BaCl2 and CaCl2) on the microstructure and luminescence behaviors of these phosphors.</sec><sec id="j_msp-2016-0079_s_002_w2aab3b8d255b1b7b1ab1b1Aa"><label>2</label><div>Experimental</div><sec id="j_msp-2016-0079_s_002_s_001_w2aab3b8d255b1b7b1ab1b1b2Aa"><label>2.1</label><div>Preparation</div>To produce YBO3:1%Eu3+ phosphor via solid state synthesis, the starting materials including yttrium acetate (Y(CH3COO)3·H2O), boric acid (H3BO3), europium oxide (Eu2O3), lithium chlorides (LiCl), barium chlorides (BaCl2) and calcium chlorides (CaCl2) were purchased at the highest possible grade from Aldrich. In a typical synthesis of YBO3:1%Eu3+ phosphor, specific amounts of yttrium acetate, boric acid and eu-ropium oxide were mixed in an alumina crucible, followed by heating in a tube furnace at 1100°C for 2 hours.</sec><sec id="j_msp-2016-0079_s_002_s_002_w2aab3b8d255b1b7b1ab1b1b3Aa"><label>2.2</label><div>Characterization</div>The crystal structures were analyzed by X-ray diffraction with CuKα radiation (λ = 1.54 Å). The morphology of the powders was observed by scanning electron microscope (JSM 6360) and field emission scanning electron microscope (JSM 6330F). Also, X-ray photoelectron spectroscopy (XPS, Thermo VG Scientific, UK) and photolumi-nescence excitation and emission (PL, FTP Felix 32, Japan) were employed for characterization of synthesized phosphors.</sec></sec><sec id="j_msp-2016-0079_s_003_w2aab3b8d255b1b7b1ab1b2Aa"><label>3</label><div>Results and discussion</div><sec id="j_msp-2016-0079_s_003_s_001_w2aab3b8d255b1b7b1ab1b2b2Aa"><label>3.1</label><div>XRD analysis</div><a ref-type="fig" href="#j_msp-2016-0079_fig_001_w2aab3b8d255b1b7b1ab1b2b2b3Aa">Fig.1</a> shows the XRD spectra of the synthesized solid state YBO3:Eu3+ phosphors. The figure confirms that these materials are well crystallized with a hexagonal crystal structure (JCPDS# 16277). Obviously, in the phosphors synthesized with only 2 % flux compounds, no remarkable differences can be observed compared to those synthesized without any additives. By contrast, when the amount of flux compounds reaches 5 % or 10 %, some extra peaks have emerged in the XRD spectra. For instance, when LiCl has been consumed, an extra peak at approximately 25° has arrived, while additional peaks have been generated at 25.5° and 36° for BaCl2 and 30° for CaCl2.<figure id="j_msp-2016-0079_fig_001_w2aab3b8d255b1b7b1ab1b2b2b3Aa" position="float" fig-type="figure"><h2></h2><figCaption>X-ray diffraction patterns of solid state YBO3:Eu3+ phosphors with different amounts of flux compounds (a) LiCl, (b) BaCl2 and (c) CaCl2.</figCaption><img xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_fig_001.jpg" src="https://sciendo-parsed.s3.eu-central-1.amazonaws.com/647250b8215d2f6c89dc3e1a/j_msp-2016-0079_fig_001.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Date=20240611T153500Z&amp;X-Amz-SignedHeaders=host&amp;X-Amz-Expires=18000&amp;X-Amz-Credential=AKIA6AP2G7AKP25APDM2%2F20240611%2Feu-central-1%2Fs3%2Faws4_request&amp;X-Amz-Signature=f5371830716055c19e02dadeab948032d1014e5fc856a4accc2a1e3fc54d5144" class="mw-100"/></figure>For the phosphors synthesized with small amounts of flux compounds, ICP analysis was employed to judge about the presence or absence of remaining flux compounds after solid state synthesis at 1100 °C. The results of ICP (not shown) confirmed the remaining of Li, Ba and Ca after solid state synthesis. Also, as the boiling points of LiCl, BaCl2 and CaCl2 are 1382 °C, 1560 °C and 1935 °C, respectively, it is evident that the employed calcination temperature is not sufficient for evacuating the flux compounds.</sec><sec id="j_msp-2016-0079_s_003_s_002_w2aab3b8d255b1b7b1ab1b2b3Aa"><label>3.2</label><div>Microstructure analysis</div><a ref-type="fig" href="#j_msp-2016-0079_fig_002_w2aab3b8d255b1b7b1ab1b2b3b3Aa">Fig. 2</a> shows the SEM microstructure of YBO3:Eu3+ phosphors, without and with different concentrations of flux compounds. It is easily observed that in the presence of flux compounds, the particle size of phosphors increases significantly.<figure id="j_msp-2016-0079_fig_002_w2aab3b8d255b1b7b1ab1b2b3b3Aa" position="float" fig-type="figure"><h2></h2><figCaption>SEM images of synthesized solid state YBO3:Eu3+ phosphors with (a) no flux, (b) 2 wt.% LiCl, (c) 5 wt.% LiCl, (d) 10 wt.% LiCl, (e) 2 wt.% BaCl2, (f) 5 wt.% BaCl2, (g) 10 wt.% BaCl2, (h) 2 wt.% CaCl2, (i) 5 wt.% CaCl2 and (j) 10 wt.% CaCl2.</figCaption><img xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_fig_002.jpg" src="https://sciendo-parsed.s3.eu-central-1.amazonaws.com/647250b8215d2f6c89dc3e1a/j_msp-2016-0079_fig_002.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Date=20240611T153500Z&amp;X-Amz-SignedHeaders=host&amp;X-Amz-Expires=18000&amp;X-Amz-Credential=AKIA6AP2G7AKP25APDM2%2F20240611%2Feu-central-1%2Fs3%2Faws4_request&amp;X-Amz-Signature=141f45de7b95af2a55392156f9a5177df86dfc147e8d5a19723f9b1c4e987e25" class="mw-100"/></figure>It can be found that the obtained average particle size is about 1.2 μm when no flux is used in the solid state procedure. Instead, in the presence of flux compounds, the size of particles is in the range of 1.9 μm to 4.8 μm, depending on the type and quantity of employed flux compounds. Hence, it is concluded that regardless of flux type, the addition of flux compounds improves the sintering and the crystal growth. According to <a ref-type="fig" href="#j_msp-2016-0079_fig_003_w2aab3b8d255b1b7b1ab1b2b3b4b6Aa">Fig. 3</a>, it is seen that LiCl has the strongest effect on the growth of phosphor particles, increasing the particle size from 1.2 μm to 4.8 μm. Conversely, CaCl2 has a relatively weak influence on the growth of particles. The growth rate of particles in the presence of flux compounds can be estimated from the following equation:
<disp-formula id="j_msp-2016-0079_eq_001_w2aab3b8d255b1b7b1ab1b2b3b4b5Aa"><label>(1)</label><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_eq_001.png"></graphic><math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mi>d</mi><mi>φ</mi><mrow><mo>/</mo></mrow><mi>d</mi><mi>t</mi><mo>=</mo><mrow><msub><mi>A</mi><mrow><mi>e</mi><mi>x</mi><mi>p</mi></mrow></msub></mrow><mfrac><mrow><mo>−</mo><mi>Δ</mi><mi>E</mi></mrow><mrow><mi>K</mi><mi>T</mi></mrow></mfrac></math><tex-math>$$d\varphi /dt = {A_{exp }}\frac{{ - \Delta E}}{{KT}}$$</tex-math></alternatives></disp-formula><figure id="j_msp-2016-0079_fig_003_w2aab3b8d255b1b7b1ab1b2b3b4b6Aa" position="float" fig-type="figure"><h2></h2><figCaption>Variation of phosphor particle size versus flux quantities.</figCaption><img xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_fig_003.jpg" src="https://sciendo-parsed.s3.eu-central-1.amazonaws.com/647250b8215d2f6c89dc3e1a/j_msp-2016-0079_fig_003.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Date=20240611T153500Z&amp;X-Amz-SignedHeaders=host&amp;X-Amz-Expires=18000&amp;X-Amz-Credential=AKIA6AP2G7AKP25APDM2%2F20240611%2Feu-central-1%2Fs3%2Faws4_request&amp;X-Amz-Signature=0fcbfc0903e72a2e7f93722a05b63341c1aad14d4ab5b68b12b247b2012a5bf4" class="mw-100"/></figure>In this equation, dφ/dt, A, K, ΔE and T rep-resent particle growth rate, flux related constant, Boltzmann constant, activation energy and synthesizing temperature, respectively [<a ref-type="bibr" href="#j_msp-2016-0079_ref_018_w2aab3b8d255b1b7b1ab2b1c18Aa">18</a>]. Clearly, the particle growth in the presence of flux compounds depends mainly on the synthesis temperature and the activation energy. The above equation reveals that an increase of temperature and decrease of activation energy, accelerate the crystal growth. As the melting points of LiCl, BaCl2 and CaCl2 are about 610 °C, 962 °C and 775 °C, respectively, at the solid state synthesis temperature (T = 1100 °C), all the flux compounds are molten. So, it can be assumed that for the nuclei in themixed oxide system, the activation energy can be written as [<a ref-type="bibr" href="#j_msp-2016-0079_ref_018_w2aab3b8d255b1b7b1ab2b1c18Aa">18</a>]:
<disp-formula id="j_msp-2016-0079_eq_002_w2aab3b8d255b1b7b1ab1b2b3b5b9Aa"><label>(2)</label><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_eq_002.png"></graphic><math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mi>Δ</mi><mi>E</mi><mo>=</mo><mi>N</mi><mfenced><mrow><mi>G</mi><mi>v</mi><mo>+</mo><mi>σ</mi></mrow></mfenced><mi>λ</mi></math><tex-math>$$\Delta E = N\left( {Gv + \sigma } \right)\lambda$$</tex-math></alternatives></disp-formula><disp-formula id="j_msp-2016-0079_eq_003_w2aab3b8d255b1b7b1ab1b2b3b5c10Aa"><label>(3)</label><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_eq_003.png"></graphic><math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mi>Δ</mi><mi>E</mi><mrow><mo>∼</mo></mrow><mi>N</mi><mi>σ</mi><mi>λ</mi></math><tex-math>$$\Delta E\ {\sim}\ N\sigma \lambda$$</tex-math></alternatives></disp-formula>This implies that the change in free energy depends directly on the number of nuclei (N), surface energy (σ) and the volume of nuclei (λ).It can be found that flux composition affects the surface energy and so activation energy, significantly. Also, referring to the presented comparison of growth rates, LiCl provides the lowest surface energy.</sec><sec id="j_msp-2016-0079_s_003_s_003_w2aab3b8d255b1b7b1ab1b2b4Aa"><label>3.3</label><div>Photoluminescence properties</div><a ref-type="fig" href="#j_msp-2016-0079_fig_004_w2aab3b8d255b1b7b1ab1b2b4b3Aa">Fig. 4</a> shows the photoluminescence excitation (PLE) and emission spectra of synthesized solid state YBO3:Eu3+ phosphors under λem = 592 nm and λexc = 240 nm, respectively. It has already been proved that the broad band in the range of 200 nm to 260 nm belongs to the charge transfer band (CTB) of Eu3+−O2−, since an electron trans-fers from the oxygen orbit (2p6) to the empty states of Eu3+ (4f) [<a ref-type="bibr" href="#j_msp-2016-0079_ref_008_w2aab3b8d255b1b7b1ab2b1b8Aa">8</a>]. Also, in the PL emission spectra, the observed emission peaks in the wavelengths larger than 575 nm are associated with the transitions from the excited 5D0 level to 7Fj (J = 1, 2, 3, 4) levels of Eu3+ activators [<a ref-type="bibr" href="#j_msp-2016-0079_ref_019_w2aab3b8d255b1b7b1ab2b1c19Aa">19</a>]. The strong band observed at 592 nm is related to the 5D0 → 7F1 magnetic dipole transition of trivalent Eu ions. In YBO3 host lattice with a hexagonal crystal structure, since Eu3+ ions are substituted into Y3+ locations similar to Y3+ ions, Eu3+ ions are also surrounded by BO3 groups and possess a symmetry center implying a strong 5D0 → 7F1 transition. Also, the bands at approximately 611 nm and 627 nm are attributed to the 5D0 → 7F2 electric dipole transitions [<a ref-type="bibr" href="#j_msp-2016-0079_ref_020_w2aab3b8d255b1b7b1ab2b1c20Aa">20</a>]. In the PL measurements of the phosphors synthesized with flux compounds, with an increase in the amount of fluxes, no main change in the shape or position of peaks could be observed, except the intensity of the peaks. Also, the addition of up to 2 wt.% of LiCl, BaCl2 and CaCl2 results in enhancement of the photoluminescence intensities. But the use of larger quantities of fluxes suppresses emission of YBO3:Eu3+ phosphors. The improvement of PL intensity in the presence of low amounts of flux compounds may be attributed to the improved crystallinity as well as the enlarged grain size, explained elsewhere. On the other hand, as it was discussed for the XRD spectra, the use of relatively large amounts of flux compounds results in the formation of some impurities in the crystal structure of YBO3 phosphors. This phenomenon plays a vital role in suppressing the photoluminescence intensities. Noteworthy, the intensity ratio of the 5D0 → 7F1 transition to that of 5D0 → 7F2 transition depends strongly on the local symmetry of Eu3+ ions. In short, when Eu3+ ions occupy the inversion center sites, this ratio will be larger and the produced phosphor looks more reddish.<figure id="j_msp-2016-0079_fig_004_w2aab3b8d255b1b7b1ab1b2b4b3Aa" position="float" fig-type="figure"><h2></h2><figCaption>Photoluminescence spectra (a) excitation (λem = 592 nm) and (b) emission (λexc = 240 nm) of solid state synthesized YBO3:Eu3+ phosphors, and the influence of different weight percentages of (c) LiCl, (d) BaCl2 and (e) CaCl2 fluxes (λexc = 240 nm) in YBO3:Eu3+ phosphors.</figCaption><img xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="graphic/j_msp-2016-0079_fig_004.jpg" src="https://sciendo-parsed.s3.eu-central-1.amazonaws.com/647250b8215d2f6c89dc3e1a/j_msp-2016-0079_fig_004.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Date=20240611T153500Z&amp;X-Amz-SignedHeaders=host&amp;X-Amz-Expires=17999&amp;X-Amz-Credential=AKIA6AP2G7AKP25APDM2%2F20240611%2Feu-central-1%2Fs3%2Faws4_request&amp;X-Amz-Signature=4a5af1f2bdcbf054c3269e0801b39e51fe84eede050d97fa4872ec52ccc0d06a" class="mw-100"/></figure></sec></sec><sec id="j_msp-2016-0079_s_004_w2aab3b8d255b1b7b1ab1b3Aa"><label>4</label><div>Conclusions</div>Different amounts of LiCl, BaCl2 and CaCl2 were used as flux compounds in the solid state synthesis of YBO3:Eu3+ phosphors. LiCl and CaCl2 showed the strongest and weakest effect on the growth of particles, respectively. Also, it was argued that an addition of 2 wt.% of the mentioned fluxes increases the emission intensity of YBO3:Eu3+ phosphors efficiently but further increase of these compounds suppresses it significantly.</sec></div>

Effect of flux compounds on the luminescence properties of Eu3+ doped YBO3 phosphors

Department of Materials Science and Engineering, Golpayegan University of Technology, Golpayegan, Isfahan,

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of flux compounds on the luminescence properties of Eu doped YBO phosphors

In this investigation, Eu3+ doped YBO3 phosphors were synthesized by conventional solid state method at 1100°C under atmosphere condition. Meanwhile, different...

Effect of flux compounds on the luminescence properties of Eu³⁺ doped YBO₃ phosphors

Data publikacji: 19 lis 2016

Zakres stron: 780 - 785

Otrzymano: 06 lut 2016

Przyjęty: 24 cze 2016

DOI: https://doi.org/10.1515/msp-2016-0079

Słowa kluczowe
phosphors, solid state, flux compounds, luminescence

© Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of flux compounds on the luminescence properties of Eu3+ doped YBO3 phosphors

Data publikacji: 19 lis 2016

Zakres stron: 780 - 785

Otrzymano: 06 lut 2016

Przyjęty: 24 cze 2016

DOI: https://doi.org/10.1515/msp-2016-0079

Słowa kluczowephosphors, solid state, flux compounds, luminescence

© Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of flux compounds on the luminescence properties of Eu³⁺ doped YBO₃ phosphors

Słowa kluczowe
phosphors, solid state, flux compounds, luminescence