<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Partition walls are often made of masonry in Romania. Although they are usually considered non-structural elements in the case of reinforced concrete framed structures, the infill panels contribute significantly to the seismic behaviour of the building. Their impact is difficult to assess, mainly because the interaction between the bounding frame and the infill is an intricate issue. This paper analyses the structural behaviour of a masonry infilled reinforced concrete frame system subjected to in - plane loading. Three numerical models are proposed and their results are compared in terms of stiffness and strength of the structure. The role of the openings in the infill panel on the behaviour is analysed and discussed. The effect of gaps between the frame and the infill on the structural behaviour is also investigated. Comparisons are made with the in-force Romanian and European regulations provisions.</p></abstract>

Partition walls are often made of masonry in Romania. Although they are usually considered non-structural elements in the case of reinforced concrete framed structures, the infill panels contribute significantly to the seismic behaviour of the building. Their impact is difficult to assess, mainly because the interaction between the bounding frame and the infill is an intricate issue. This paper analyses the structural behaviour of a masonry infilled reinforced concrete frame system subjected to in - plane loading. Three numerical models are proposed and their results are compared in terms of stiffness and strength of the structure. The role of the openings in the infill panel on the behaviour is analysed and discussed. The effect of gaps between the frame and the infill on the structural behaviour is also investigated. Comparisons are made with the in-force Romanian and European regulations provisions.

Analysis Of Masonry Infilled RC Frame Structures Under Lateral Loading

Assistant Lecturer, PhD, Technical University of Civil Engineering, Faculty of Civil, Industrial and Agricultural Buildings

Associate Professor, PhD, Technical University of Civil Engineering, Faculty of Civil, Industrial and Agricultural Buildings

Modelling in Civil Environmental Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Analysis Of Masonry Infilled RC Frame Structures Under Lateral Loading"}

Partition walls are often made of masonry in Romania. Although they are usually considered non-structural elements in the case of reinforced concrete framed...

Analysis Of Masonry Infilled RC Frame Structures Under Lateral Loading

Data publikacji: 16 maj 2015

Zakres stron: 29 - 39

DOI: https://doi.org/10.1515/mmce-2015-0004

Słowa kluczowe
numerical modelling, in-plane deformation, gap, diagonal strut, openings

© Mircea Barnaure et al.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Analysis Of Masonry Infilled RC Frame Structures Under Lateral Loading

Data publikacji: 16 maj 2015

Zakres stron: 29 - 39

DOI: https://doi.org/10.1515/mmce-2015-0004

Słowa kluczowenumerical modelling, in-plane deformation, gap, diagonal strut, openings

© Mircea Barnaure et al.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
numerical modelling, in-plane deformation, gap, diagonal strut, openings