<abstract xmlns="http://www.w3.org/1999/xhtml">Polarization curves measured in a sufficiently aggressive environment (e.g. 0.5 mol dm−3 of H2SO4) may help to assess corrosion resistance of stainless steels. New phases precipitate in steel exposed long-term to high temperatures, which may affect the corrosion resistance. Potentiostatic polarization curves were measured on austenitic steel Super304H in a solution annealed state (from the producer) and in a state aged for 15 000 hours at temperatures of 650, 675 and 700 °C. The higher level of current density in passivity (worse corrosion resistance) was reported after aging at 650 °C.</abstract>

Polarization curves measured in a sufficiently aggressive environment (e.g. 0.5 mol dm−3 of H2SO4) may help to assess corrosion resistance of stainless steels. New phases precipitate in steel exposed long-term to high temperatures, which may affect the corrosion resistance. Potentiostatic polarization curves were measured on austenitic steel Super304H in a solution annealed state (from the producer) and in a state aged for 15 000 hours at temperatures of 650, 675 and 700 °C. The higher level of current density in passivity (worse corrosion resistance) was reported after aging at 650 °C.

Anodic polarization curves of austenitic steel Super304H in sulphuric acid solution

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Polarization curves measured in a sufficiently aggressive environment (e.g. 0.5 mol dm−3 of H2SO4) may help to assess corrosion resistance of stainless steels....

Anodic polarization curves of austenitic steel Super304H in sulphuric acid solution

Data publikacji: 12 maj 2016

Zakres stron: 41 - 45

DOI: https://doi.org/10.1515/kom-2016-0007

© 2016 Chmela T., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.