<abstract xmlns="http://www.w3.org/1999/xhtml"> The aim of this paper is to define the correlation between the geometry of grains and saturated hydraulic conductivity of soils. The particle shape characteristics were described by the ζ0C index (Parylak, 2000), which expresses the variability of several shape properties, such as sphericity, angularity and roughness. The analysis was performed on samples of four soils, which were characterised by the same grain size distribution and extremely different particle structure. The shape characteristics varied from ideally spherical, smooth grains (glass microbeads GM) to highly irregular and rough particles (fly ash FA). For each soil, laboratory tests of saturated hydraulic conductivity (constant head test CHT and falling head test FHT) were performed. Additionally, an empirical analysis of effective pore diameter was conducted with use of the analytical models developed by Pavchich (Wolski, 1987) and Indraratna and Vafai (1997). The models were modified by introducing the ζ0C index. Experiments have shown that saturated hydraulic conductivity depends on grains shape and surface roughness. This parameter decreases with the increase in the irregularity of soil particles. Moreover, it was proven that the ζ0C reflects the relationship between effective pore diameter and grain shape characteristics.</abstract>

The aim of this paper is to define the correlation between the geometry of grains and saturated hydraulic conductivity of soils. The particle shape characteristics were described by the ζ0C index (Parylak, 2000), which expresses the variability of several shape properties, such as sphericity, angularity and roughness. The analysis was performed on samples of four soils, which were characterised by the same grain size distribution and extremely different particle structure. The shape characteristics varied from ideally spherical, smooth grains (glass microbeads GM) to highly irregular and rough particles (fly ash FA). For each soil, laboratory tests of saturated hydraulic conductivity (constant head test CHT and falling head test FHT) were performed. Additionally, an empirical analysis of effective pore diameter was conducted with use of the analytical models developed by Pavchich (Wolski, 1987) and Indraratna and Vafai (1997). The models were modified by introducing the ζ0C index. Experiments have shown that saturated hydraulic conductivity depends on grains shape and surface roughness. This parameter decreases with the increase in the irregularity of soil particles. Moreover, it was proven that the ζ0C reflects the relationship between effective pore diameter and grain shape characteristics.

Influence of soil particle shape on saturated hydraulic conductivity

Institute of Building Engineering, Wrocław University of Environmental and Life Sciences, 24 Grunwaldzki Sq., 50-363 Wrocław,

Journal of Hydrology and Hydromechanics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Influence of soil particle shape on saturated hydraulic conductivity"}

The aim of this paper is to define the correlation between the geometry of grains and saturated hydraulic conductivity of soils. The particle shape...

Influence of soil particle shape on saturated hydraulic conductivity

Data publikacji: 08 gru 2016

Zakres stron: 80 - 87

Otrzymano: 16 paź 2015

Przyjęty: 25 lip 2016

DOI: https://doi.org/10.1515/johh-2016-0054

Słowa kluczowe
Particle shape, Saturated hydraulic conductivity, Effective pore diameter

© 2016

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of soil particle shape on saturated hydraulic conductivity

Data publikacji: 08 gru 2016

Zakres stron: 80 - 87

Otrzymano: 16 paź 2015

Przyjęty: 25 lip 2016

DOI: https://doi.org/10.1515/johh-2016-0054

Słowa kluczoweParticle shape, Saturated hydraulic conductivity, Effective pore diameter

© 2016

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
Particle shape, Saturated hydraulic conductivity, Effective pore diameter