<abstract xmlns="http://www.w3.org/1999/xhtml">Combustion of fuels, including renewable fuels and thermal treatment of waste (CFCs, pesticides), is associated with emissions of pollutants including halogens. The reversible process of sorption/desorption of HCl, in a fluidized (bubbling) bed reactor (BFB), during co-combustion of Cl-materials, was carried out. The thermal decomposition of methylene chloride (DCM, CH2Cl2) in an inert sand bed with the addition of the hydroxyapatite sorbent (HAp, Ca5(PO4)3(OH)) was investigated. The process parameters were as follows: temperature - 930 °C, the air excess - 1.3, stream rate of CH2Cl2 - 50 cm3/h. The concentration of HCl, CCl4, CHCl3, CH2Cl2, CH3Cl, COCl2 in the exhaust gases were monitored online with FTIR spectroscopy. The main chlorine product was hydrogen chloride. Samples of unprocessed HAp, taken from the bed during the process, and solid apatite residues were analyzed by X-ray diffraction (XRD). The content of chlorapatite (Ca5(PO4)3Cl) in the analyzed samples was respectively 11, 53 and 19 %. X-ray fluorescence (XRF) analysis showed the molar ratio of Ca:P:Cl was: 1.00:0.36:0.01, 1.00:0.36:0.09, 1.00:0.37:0.04 respectively. The HAp could be used as an sorbent of the HCl(g) during combustion of materials containing chlorine.</abstract>

Combustion of fuels, including renewable fuels and thermal treatment of waste (CFCs, pesticides), is associated with emissions of pollutants including halogens. The reversible process of sorption/desorption of HCl, in a fluidized (bubbling) bed reactor (BFB), during co-combustion of Cl-materials, was carried out. The thermal decomposition of methylene chloride (DCM, CH2Cl2) in an inert sand bed with the addition of the hydroxyapatite sorbent (HAp, Ca5(PO4)3(OH)) was investigated. The process parameters were as follows: temperature - 930 °C, the air excess - 1.3, stream rate of CH2Cl2 - 50 cm3/h. The concentration of HCl, CCl4, CHCl3, CH2Cl2, CH3Cl, COCl2 in the exhaust gases were monitored online with FTIR spectroscopy. The main chlorine product was hydrogen chloride. Samples of unprocessed HAp, taken from the bed during the process, and solid apatite residues were analyzed by X-ray diffraction (XRD). The content of chlorapatite (Ca5(PO4)3Cl) in the analyzed samples was respectively 11, 53 and 19 %. X-ray fluorescence (XRF) analysis showed the molar ratio of Ca:P:Cl was: 1.00:0.36:0.01, 1.00:0.36:0.09, 1.00:0.37:0.04 respectively. The HAp could be used as an sorbent of the HCl(g) during combustion of materials containing chlorine.

Sorption of Hydrogen Chloridein The Fluidized Bed Reactor

Faculty of Chemical Engineering and Technology

Ecological Chemistry and Engineering S

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Sorption of Hydrogen Chloridein The Fluidized Bed Reactor"}

Combustion of fuels, including renewable fuels and thermal treatment of waste (CFCs, pesticides), is associated with emissions of pollutants including...

Sorption of Hydrogen Chloridein The Fluidized Bed Reactor

Data publikacji: 15 kwi 2019

Zakres stron: 69 - 80

DOI: https://doi.org/10.1515/eces-2019-0006

Słowa kluczowe
chlorine, fluidized bed combustion, hydroxyapatite, sorption

© 2019 Małgorzata Olek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Sorption of Hydrogen Chloridein The Fluidized Bed Reactor

Data publikacji: 15 kwi 2019

Zakres stron: 69 - 80

DOI: https://doi.org/10.1515/eces-2019-0006

Słowa kluczowechlorine, fluidized bed combustion, hydroxyapatite, sorption

© 2019 Małgorzata Olek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
chlorine, fluidized bed combustion, hydroxyapatite, sorption