<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper is a report of the examination of the tribological wear characteristics of certain dental metal biomaterials. In the study, tests were undertaken on the following materials: 316L steel, NiCrMo alloy, technically pure titanium (ASTM-grade 2) and Ti6Al4V ELI alloy (ASTM-grade 5). The tribological tests were performed in artificial saliva to determine the coefficient of friction and wear factor; the traces of wear were then ascertained through SEM. The significance of variations in the wear factor, was subsequently assessed by the U Mann-Whitney test. The resistance to wear in the ball-on-disc test under in vitro conditions was observed for the tested materials in the following order: NiCrMo>316L>Ti6Al4V>Ti grade 2.</p></abstract>

The paper is a report of the examination of the tribological wear characteristics of certain dental metal biomaterials. In the study, tests were undertaken on the following materials: 316L steel, NiCrMo alloy, technically pure titanium (ASTM-grade 2) and Ti6Al4V ELI alloy (ASTM-grade 5). The tribological tests were performed in artificial saliva to determine the coefficient of friction and wear factor; the traces of wear were then ascertained through SEM. The significance of variations in the wear factor, was subsequently assessed by the U Mann-Whitney test. The resistance to wear in the ball-on-disc test under in vitro conditions was observed for the tested materials in the following order: NiCrMo>316L>Ti6Al4V>Ti grade 2.

Tribological characteristics of dental metal biomaterials

Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin,

Current Issues in Pharmacy and Medical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Tribological characteristics of dental metal biomaterials"}

The paper is a report of the examination of the tribological wear characteristics of certain dental metal biomaterials. In the study, tests were undertaken on...

Tribological characteristics of dental metal biomaterials

Data publikacji: 23 sty 2017

Zakres stron: 158 - 162

Otrzymano: 14 cze 2016

Przyjęty: 15 lip 2016

DOI: https://doi.org/10.1515/cipms-2016-0033

Słowa kluczowe
wear, dental materials, ball-on-disc test, friction coefficient

© 2016 Mariusz Walczak et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Tribological characteristics of dental metal biomaterials

Data publikacji: 23 sty 2017

Zakres stron: 158 - 162

Otrzymano: 14 cze 2016

Przyjęty: 15 lip 2016

DOI: https://doi.org/10.1515/cipms-2016-0033

Słowa kluczowewear, dental materials, ball-on-disc test, friction coefficient

© 2016 Mariusz Walczak et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
wear, dental materials, ball-on-disc test, friction coefficient