<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper gives general information about multi-objective, axiomatic and robust design approaches and considersasolution model of nonlinear multi-objective optimization problem based on applyinganew robust design approach. Both axiomatic and robust design approaches were used complementarily inacase study with distinct multi-objectives. In this case study, the main target was achieving each objective optimum to minimize the mass and the shear stress ofaspring by integrating robustness and durability at the design stage due to trade off between objectives. This spring problem was examined using the independence axiom of the axiomatic design methodology. Also, semangularity and reangularity concepts were used and design matrices were formed to find coupled and decoupled solutions. It was observed that there were some acceptable design parameter values for which the design became decoupled. Graphical and numerical results were checked to see if they were compatible with each other. Finally, this decoupled design was given appropriate tolerances by using robust design method. This way,arobust and durable spring was designed which would satisfy the given specifications with minimum cost in the existing literature from the view point of axiomatic design approach.</p></abstract>

This paper gives general information about multi-objective, axiomatic and robust design approaches and considersasolution model of nonlinear multi-objective optimization problem based on applyinganew robust design approach. Both axiomatic and robust design approaches were used complementarily inacase study with distinct multi-objectives. In this case study, the main target was achieving each objective optimum to minimize the mass and the shear stress ofaspring by integrating robustness and durability at the design stage due to trade off between objectives. This spring problem was examined using the independence axiom of the axiomatic design methodology. Also, semangularity and reangularity concepts were used and design matrices were formed to find coupled and decoupled solutions. It was observed that there were some acceptable design parameter values for which the design became decoupled. Graphical and numerical results were checked to see if they were compatible with each other. Finally, this decoupled design was given appropriate tolerances by using robust design method. This way,arobust and durable spring was designed which would satisfy the given specifications with minimum cost in the existing literature from the view point of axiomatic design approach.

Axiomatic Design Approach for Nonlinear Multiple Objective Optimizaton Problem and Robustness in Spring Design

Marmara University, Faculty of Technology, Marmara, 34722,

Marmara University, Faculty of Engineering, Marmara, 34722,

Cybernetics and Information Technologies

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

This paper gives general information about multi-objective, axiomatic and robust design approaches and considersasolution model of nonlinear multi-objective...

Axiomatic Design Approach for Nonlinear Multiple Objective Optimizaton Problem and Robustness in Spring Design

Data publikacji: 06 kwi 2017

Zakres stron: 63 - 71

DOI: https://doi.org/10.1515/cait-2017-0005

Słowa kluczowe
Axiomatic design, multi objective design, robustness

© by Ahmet Feyzioglu

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Axiomatic Design Approach for Nonlinear Multiple Objective Optimizaton Problem and Robustness in Spring Design

Data publikacji: 06 kwi 2017

Zakres stron: 63 - 71

DOI: https://doi.org/10.1515/cait-2017-0005

Słowa kluczoweAxiomatic design, multi objective design, robustness

© by Ahmet Feyzioglu

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
Axiomatic design, multi objective design, robustness