[1. Allenstein A.N., Lepienski C.M., Buschinelli A.A., Brunatto S.F. (2013), Plasma nitriding using high H2 content gas mixtures for a cavitation erosion resistant steel, Applied Surface Science, Vol. 277, 15-24.]Search in Google Scholar
[2. Alphonsa I., Chainani A., Raole P.M., Ganguli B., John P.I. (2002), A study of martensitic stainless steel AISI 420 modified using plasma nitriding, Surface and Coatings Technology, Vol. 150, 263-268.]Search in Google Scholar
[3. Alves Jr. C., da Silva E.F., Martinelli A.E. (2001), Effect of workpiece geometry on the uniformity of nitrided layers, Surface and Coatings Technology, Vol. 139, 1-5.]Search in Google Scholar
[4. Alves Jr. C., de Araújo F.O., Ribeiro K.B., da Costa J.P., Sousa R.M., de Sousa R.S. (2006), Use of cathodic cage in plasma nitriding, Surface and Coatings Technology, Vol. 201, 2450-2454.]Search in Google Scholar
[5. Baldwin M.J., Fewell M.P., Haydon S.C., Kumar S., Collins G.A., Short K.T., Tendys J. (1998), Rf-plasma nitriding of stainless steel, Surface and Coatings Technology, Vol. 98, 1187-1191.]Search in Google Scholar
[6. Balusamy T., Sankara Narayanan T.N., Ravichandran K., Park I.S., Lee M.H. (2013), Plasma nitriding of AISI 304 stainless steel: Role of surface mechanical attrition treatment, Materials Characterization, Vol. 85, 38-47.]Search in Google Scholar
[7. Basu A., Majumdar J.D., Alphonsa J., Mukherjee S., Manna, I. (2008), Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding, Materials Letters, Vol. 62, 3117-3120.]Search in Google Scholar
[8. Bell T. (2002), Surface engineering of austenitic stainless steel, Surface Engineering, Vol. 18, 415-422.]Search in Google Scholar
[9. Blawert C., Mordike B.L., Collins G.A., Short K.T., Tendys, J. (1998), Influence of process parameters on the nitriding of steels by plasma immersion ion implantation, Surface and Coatings Technology, Vol. 103-104, 240-247.]Search in Google Scholar
[10. Borges C.M., Hennecke S., Pfender E. (2000), Decreasing chromium precipitation in AISI 304 stainless steel during the plasma-nitriding process, Surface and Coatings Technology, Vol. 123, 112-121.]Search in Google Scholar
[11. Borgioli F., Fossati A., Galvanetto E., Bacci T. (2005), Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature, Surface and Coatings Technology, Vol. 200, 2474-2480.]Search in Google Scholar
[12. Borgioli F., Fossati A., Galvanetto E., Bacci T., Pradelli G. (2006), Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure, Surface and Coatings Technology, Vol. 200, 5505-5513.]Search in Google Scholar
[13. Borowski T., Kamiński J., Trojanowski J., Wierzchoń T. (2010), Analysis of the structure and properties plasma nitrided 316L steel in different zones of plasma discharge (in polish), Archives of Machine Technology and Automatization, Vol. 30, 69-77.]Search in Google Scholar
[14. Brühl S.P., Charadia R., Simison S., Lamas D.G., Cabo A. (2010), Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding, Surface and Coatings Technology, Vol. 204, 3280-3286.]Search in Google Scholar
[15. Corengia P., Traverso M.G., García Alonso-García D., Egidi D.A., Ybarra G., Moina C., Cabo A. (2004a), DC-Pulsed plasma nitriding of 4140: microstructure and topography, Matéria, Vol. 9, 111.]Search in Google Scholar
[16. Corengia P., Ybarra G., Moina C., Cabo A., Broitman E. (2004b), Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel, Surface and Coatings Technology, Vol. 187, 63-69.10.1016/j.surfcoat.2004.01.031]Search in Google Scholar
[17. Corengia P., Ybarra G., Moina C., Cabo A., Broitman E. (2005), Microstructural and topographical studies of DC-pulsed plasma nitrided AISI 4140 low-alloy steel, Surface and Coatings Technology, Vol. 200, 2391-2397.]Search in Google Scholar
[18. de Sousa R.M., de Araújo F.O., Ribeiro K.B., Mendes M.D., da Costa J.P., Alves Jr. C. (2007), Cathodic cage nitriding of samples with different dimensions, Materials Science and Engineering A, Vol. 465, 223-227.]Search in Google Scholar
[19. de Sousa R.M., Moura Y.L., de Sousa P.O., Neto J.M., Costa T.C., Alves Jr. C. (2014), Nitriding of AISI 1020 Steel: Comparison Between Conventional Nitriding and Nitriding with Cathodic Cage, Materials Research, Vol. 17, 708-713.]Search in Google Scholar
[20. de Souza S.D., Olzon-Dionysio M., Basso R.O., de Souza S. (2010), Mössbauer spectroscopy study on the corrosion resistance of plasma nitrided ASTM F138 stainless steel in chloride solution, Materials Characterization, Vol. 61, 992-999.]Search in Google Scholar
[21. Díaz-Guillén J.C., Campa-Castilla A., Pérez-Aguilar S.I., Granda-Gutiérrez E.E., Garza-Gómez A., Candelas-Ramírez J., Méndez-Méndez R. (2009), Effect of duty cycle on surface properties of AISI 4340 using a pulsed plasma nitriding process, Superficies y Vacío, Vol. 22, 1-4.]Search in Google Scholar
[22. Díaz-Guillén J.C., Granda-Gutiérrez E.E., Vargas-Gutiérrez G., Díaz-Guillén M.R., Aguilar-Martínez J.A., Álvarez-Contreras L. (2015), Effect of Nitriding Current Density on the Surface Properties and Crystallite Size of Pulsed Plasma-Nitrided AISI 316L, Journal of Materials Science and Chemical Engineering, Vol. 3, 45-51.]Search in Google Scholar
[23. Dong H., Qi P.Y., Li X.Y., Llewellyn R.J. (2006), Improving the erosion–corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C, Materials Science and Engineering A, Vol. 431, 137-145.]Search in Google Scholar
[24. Fattah M., Mahboubi F. (2010), Comparison of ferritic and austenitic plasma nitriding and nitrocarburizing behavior of AISI 4140 low alloy steel, Materials and Design, Vol. 31, 3915-3921.]Search in Google Scholar
[25. Fernandes F.P., Heck S.C., Pereira R.G., Picon C.A., Nascente P.P., Casteletti L.C. (2010), Ion nitriding of a superaustenitic stainless steel: Wear and corrosion characterization, Surface and Coatings Technology, Vol. 204, 3087-3090.]Search in Google Scholar
[26. Foerster C.E., Serbena F.C., da Silva S.R., Lepienski C.M., de M. Siqueira C. J., Ueda M. (2007), Mechanical and tribological properties of AISI 304 stainless steel nitrided by glow discharge compared to ion implantation and plasma immersion ion implantation, Nuclear Instruments and Methods in Physics Research B, Vol. 257, 732-736.]Search in Google Scholar
[27. Fossati A., Borgioli F., Galvanetto E., Bacci T. (2006a), Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions, Corrosion Science, Vol. 48, 1513-1527.10.1016/j.corsci.2005.06.006]Search in Google Scholar
[28. Fossati A., Borgioli F., Galvanetto E., Bacci T. (2006b), Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time, Surface and Coatings Technology, Vol. 200, 3511-3517.10.1016/j.surfcoat.2004.10.122]Search in Google Scholar
[29. Gallo S.C., Dong H. (2009), Study of active screen plasma processing conditions for carburising and nitriding austenitic stainless steel, Surface and Coatings Technology, Vol. 203, 3669-3675.]Search in Google Scholar
[30. Hudis M. (1973), Study of ion-nitriding, Journal of Applied Physics, Vol. 44, 1489-1496.]Search in Google Scholar
[31. Jeong B.Y., Kim M.H. (2001), Effects of pulse frequency and temperature on the nitride layer and surface characteristics of plasma nitrided stainless steel, Surface and Coatings Technology, Vol. 137, 249-254.]Search in Google Scholar
[32. Jeong B.Y., Kim M.H. (2001), Effects of the process parameters on the layer formation behavior of plasma nitrided steels, Surface and Coatings Technology, Vol. 141, 182-186.]Search in Google Scholar
[33. Karimzadeh N., Moghaddam E.G., Mirjani M., Raeissi K. (2013), The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel, Applied Surface Science, Vol. 283, 584-589.]Search in Google Scholar
[34. Kliauga A.M., PohI M. (1998), Effect of plasma nitriding on wear and pitting corrosion resistance of X2CrNiMoN22-5-3 duplex stainless steel, Surface and Coatings Technology, Vol. 98, 1205-1210.]Search in Google Scholar
[35. Kurelo B.E., de Souza G.B., da Silva S.R., Serbena F.C., Foerster C.E., Alves Jr. C. (2015), Plasma nitriding of HP13Cr supermartensitic stainless steel, Applied Surface Science, Vol. 349, 403-414.]Search in Google Scholar
[36. Larisch B., Brusky U., Spies H. J. (1999), Plasma nitriding of stainless steels at low temperatures, Surface and Coatings Technology, Vol. 116–119, 205–211.]Search in Google Scholar
[37. Łępicka M., Grądzka-Dahlke M. (2013), Effect of Heat Treatment and Corrosion Resistance of AISI 440B Martensitic Stainless Steel, Acta Mechanica et Automatica, Vol. 7, 155-159.]Search in Google Scholar
[38. Łępicka M., Grądzka-Dahlke M. (2014), Effect of Plasma Nitriding Conditions on Corrosion Resistance of AISI 440B Martensitic Stainless Steel, Acta Mechanica et Automatica, Vol. 8, 156-159.]Search in Google Scholar
[39. Li C.X., Bell T. (2006), Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions, Corrosion Science, Vol. 48, 2036-2049.]Search in Google Scholar
[40. Li G.J., Peng Q., Li C., Wang Y., Gao J., Chen S.Y., Shen B.L. (2008), Effect of DC plasma nitriding temperature on microstructure and dry-sliding wear properties of 316L stainless steel, Surface and Coatings Technology, Vol. 202, 2749-2754.]Search in Google Scholar
[41. Li Y., Wang L., Shen L., Zhang D., Wang C. (2010), Plasma nitriding of 42CrMo low alloy steels at anodic or cathodic potentials, Surface and Coatings Technology, Vol. 204, 2337-2342.]Search in Google Scholar
[42. Li Y., Wang Z., Wang L. (2014a), Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time, Applied Surface Science, Vol. 298, 243-250.10.1016/j.apsusc.2014.01.177]Search in Google Scholar
[43. Li Y., Xu H., Zhu F., Wang L. (2014b), Low temperature anodic nitriding of AISI 304 austenitic stainless steel, Materials Letters, Vol. 128, 231-234.10.1016/j.matlet.2014.04.121]Search in Google Scholar
[44. Li Y., Zhang S., He Y., Zhang L., Wang L. (2014c), Characteristics of the nitrided layer formed on AISI 304 austenitic stainless steel by high temperature nitriding assisted hollow cathode discharge, Materials and Design, Vol. 64, 527-534.10.1016/j.matdes.2014.08.023]Search in Google Scholar
[45. Liang W. (2003), Surface modification of AISI 304 austenitic stainless steel by plasma nitriding, Applied Surface Science, Vol. 211, 308-314.]Search in Google Scholar
[46. Liang W., Juncai S., Xiaolei X. (2001), Low pressure plasma arc source ion nitriding compared with glow-discharge plasma nitriding of stainless steel, Surface and Coatings Technology, Vol. 145, 31-37.]Search in Google Scholar
[47. Mashreghi A.R., Soleimani S.Y., Saberifar S. (2013), The investigation of wear and corrosion behavior of plasma nitrided DIN 1.2210, Materials and Design, Vol. 46, 532-538.10.1016/j.matdes.2012.10.046]Search in Google Scholar
[48. Menthe E., Bulak A., Olfe J., Zimmermann A., Rie K.T. (2000), Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding, Surface and Coatings Technology, Vol. 133-134, 259-263.]Search in Google Scholar
[49. Menthe E., Rie K.T. (1999), Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding, Surface and Coatings Technology, Vol. 116-119, 199–204.]Search in Google Scholar
[50. Menthe E., Rie K.T., Schultze J.W., Simson S. (1995), Structure and properties of plasma-nitrided stainless steel, Surface and Coatings Technology, Vol. 74-75, 412-416.]Search in Google Scholar
[51. Michler T. (2008), Influence of plasma nitriding on hydrogen environment embrittlement of 1.4301 austenitic stainless steel, Surface and Coatings Technology, Vol. 202, 1688-1695.]Search in Google Scholar
[52. Mingolo N., Tschiptschin A.P., Pinedo C.E. (2006), On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel, Surface and Coatings Technology, Vol. 201, 4215-4218.]Search in Google Scholar
[53. Miola E.J., de Souza S.D., Olzon-Dionysio M., Spinelli D., dos Santos C.A. (1999), Nitriding of H-12 tool steel by direct-current and pulsed plasmas, Surface and Coatings Technology, Vol. 116-119, 347-351.]Search in Google Scholar
[54. Musil J., Vlcek J., Ruzicka M. (2000), Recent progress in plasma nitriding, Vacuum, Vol. 59, 940-951.]Search in Google Scholar
[55. O’Brien J.M., Goodman D. (1991), Heat treating, plasma (ion) nitriding, 240-242, in: Davis W.J.R., Metals Handbook. 9th ed., Vol. 4, ASM, Ohio.]Search in Google Scholar
[56. Ochoa E.A., Figueroa C.A., Alvarez F. (2005), The influence of the ion current density on plasma nitriding process, Surface and Coatings Technology, Vol. 200, 2165-2169.]Search in Google Scholar
[57. Olzon-Dionysio M., Campos M., Kapp M., de Souza S., de Souza S.D. (2010), Influences of plasma nitriding edge effect on properties of 316L stainless steel, Surface and Coatings Technology, Vol. 204, 3623-3628.]Search in Google Scholar
[58. Olzon-Dionysio M., de Souza S.D., Basso R.O., de Souza S. (2008), Application of Mössbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI 316L stainless steel, Surface and Coatings Technology, Vol. 202, 3607-3614.]Search in Google Scholar
[59. Pinedo C.E., Monteiro W.A. (2004), On the kinetics of plasma nitriding a martensitic stainless steel type AISI 420, Surface and Coatings Technology, Vol. 179, 119–123.]Search in Google Scholar
[60. Podgornik B., Vizintin J., Leskovsek V. (1998), Tribological properties of plasma and pulse plasma nitrided AISI 4140 steel, Surface and Coatings Technology, Vol. 108-109, 454-460.]Search in Google Scholar
[61. Psyllaki P.P., Griniari A., Pantelis D.I. (2008), Parametric study on laser nitriding of 1.5919 steel, Journal of Materials Processing Technology, Vol. 195, 299-304.10.1016/j.jmatprotec.2007.05.023]Search in Google Scholar
[62. Pye D. (2003), Practical Nitriding and Ferritic Nitrocarburizing, ASM International, Materials Park.10.31399/asm.tb.pnfn.9781627083508]Search in Google Scholar
[63. Raman S.S., Jayaprakash M. (2007), Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel, Surface and Coatings Technology, Vol. 201, 5906-5911.]Search in Google Scholar
[64. Ribeiro K.B., de Sousa R.M., de Araújo F.O., de Brito R.A., Barbosa J.P., Alves Jr. C. (2008), Industrial application of AISI 4340 steels treated in cathodic cage plasma nitriding technique, Materials Science and Engineering A, Vol. 479, 142–147.]Search in Google Scholar
[65. Saeed A., Khan A.W., Jan F., Abrar M., Khalid M. Zakaullah M. (2013), Validity of “sputtering and re-condensation” model in active screen cage plasma nitriding process, Applied Surface Science, Vol. 273, 173–178.]Search in Google Scholar
[66. Saklakoglu I.E., Saklakoglu N., Short K.T., Collins G.A. (2007), Characterization of austenitic stainless steel after plasma immersion nitrogen and carbon implantation, Materials and Design, Vol. 28, 1657-1663.]Search in Google Scholar
[67. Sharma M.K., Saikia B.K., Phukan A., Ganguli B. (2006), Plasma nitriding of austenitic stainless steel in N2 and N2–H2 dc pulsed discharge, Surface and Coatings Technology, Vol. 201, 2407-2413.]Search in Google Scholar
[68. Singh G.P., Alphonsa J., Barhai P.K., Rayjada P.A., Raole P.M., Mukherjee S. (2006), Effect of surface roughness on the properties of the layer formed on AISI 304 stainless steel after plasma nitriding, Surface and Coatings Technology, Vol. 200, 5807–5811.]Search in Google Scholar
[69. Sirin S. Y., Sirin K., Kaluc E. (2008), Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel, Materials Characterization, Vol. 59, 351-358.]Search in Google Scholar
[70. Sirin S.Y., Kaluc E. (2012), Structural surface characterization of ion nitrided AISI 4340 steel, Materials and Design, Vol. 36, 741-747.]Search in Google Scholar
[71. Skolek-Stefaniszyn E., Kaminski J., Sobczak J., Wierzchon T. (2010), Modifying the properties of AISI 316L steel by glow discharge assisted low-temperature nitriding and oxynitriding, Vacuum, 85, 164-169.10.1016/j.vacuum.2010.05.006]Search in Google Scholar
[72. Sobiecki J. R., Mańkowski P., Patejuk A. (2004), Improving the performance properties of valve martensitic steel by glow discharge-assisted nitriding, Vacuum, Vol. 76, 57-61.]Search in Google Scholar
[73. Soleimani S.Y., Mashreghi A.R., Ghasemi S.S., Moshrefifar M. (2012), The effect of plasma nitriding on the fatigue behavior of DIN 1.2210 cold work tool steel, Materials and Design, Vol. 35, 87-92.]Search in Google Scholar
[74. Soltani Asadi Z., Mahboubi A. (2012), Effect of component’s geometry on the plasma nitriding behavior of AISI 4340 steel, Materials and Design, Vol. 34, 516-521.]Search in Google Scholar
[75. Sun Y., Bell T. (1998), Sliding wear characteristics of low temperature plasma nitrided 316 austenitic stainless steel, Wear, Vol. 218, 34-42.10.1016/S0043-1648(98)00199-9]Search in Google Scholar
[76. Szabo A., Wilhelmi H. (1984), The mechanisms of nitriding of steel surfaces in a D. C. glow discharge, Haerterei Technische Mitteilungen, Vol. 39, 148-151.]Search in Google Scholar
[77. Szilágyiné Biró A. (2013), Trends of Nitriding Processes, Production Processes and Systems, Vol. 6, 57-66.]Search in Google Scholar
[78. Tibbetts G. G. (1974), Role of nitrogen atoms in “ion-nitriding”, Journal of Applied Physics, Vol. 45, 5072-5073.]Search in Google Scholar
[79. Toshkov V., Russev R., Madjarov T., Russeva E. (2007), On low temperature ion nitriding of austenitic stainless steel AISI 316, Journal of Acheivements in Materials and Manufacturing Engineering, Vol. 25, 71-74.]Search in Google Scholar
[80. Tuckart W., Forlerer E., Iurman L. (2007), Delayed cracking in plasma nitriding of AISI 420 stainless steel, Surface and Coatings Technology, Vol. 202, 199–202.]Search in Google Scholar
[81. Wang J., Xiong J., Peng Q., Fan H., Wang Y., Li G., Shen B. (2009), Effects of DC plasma nitriding parameters on microstructure and properties of 304L stainless steel, Materials Characterization, Vol. 60, 197-203.]Search in Google Scholar
[82. Wang L., Ji S., Sun J. (2006), Effect of nitriding time on the nitrided layer of AISI 304 austenitic stainless steel, Surface and Coatings Technology, Vol. 200, 5067-5070.]Search in Google Scholar
[83. Wang L., Ji S., Sun J. (2006), Effect of nitriding time on the nitrided layer of AISI 304 austenitic stainless steel, Surface and Coatings Technology, Vol. 200, 5067-5070.]Search in Google Scholar
[84. Wang S., Cai W., Li J., Wei W., Hu J. (2013), A novel rapid D.C. plasma nitriding at low gas pressure for 304 austenitic stainless steel, Materials Letters, Vol. 105, 47–49.]Search in Google Scholar
[85. Weber T., de Wit L., Saris F.W., Koniger A., Rauschenbach B., Wolf G.K., Krauss S. (1995), Hardness and corrosion resistance of single-phase nitride and carbide on iron, Materials Science and Engineering A, Vol. 199, 205-210.]Search in Google Scholar
[86. Wen D.C. (2009), Plasma nitriding of plastic mold steel to increase wear- and corrosion properties, Surface and Coatings Technology, Vol. 204, 511–519.]Search in Google Scholar
[87. Wierzchoń T., Psoda M., Skołek E., Rudnicki J., Sobiecki J.R. (2006), Glow discharge assisted nitriding of chromium steel 3H13, Maintenance Problems, Vol. 2, 53-64.]Search in Google Scholar
[88. Winck L.B., Ferreira J.A., Araujo J.A., Manfrinato M.D., da Silva C.M. (2013), Surface nitriding influence on the fatigue life behavior of ASTM A743 steel type CA6NM, Surface and Coatings Technology, Vol. 232, 844-850.]Search in Google Scholar
[89. Wu K., Liu G.Q., Wang L., Xu B.F. (2010), Research on new rapid and deep plasma nitriding techniques of AISI 420 martensitic stainless steel, Vacuum, 870-875.10.1016/j.vacuum.2009.12.001]Search in Google Scholar
[90. Xi Y.T., Liu D.X., Han D. (2008a), Improvement of corrosion and wear resistances of AISI 420 martensitic stainless steel using plasma nitriding at low temperature, Surface and Coatings Technology, Vol. 202, 2577-2583.10.1016/j.surfcoat.2007.09.036]Search in Google Scholar
[91. Xi Y.T., Liu D.X., Han D. (2008b), Improvement of erosion and erosion–corrosion resistance of AISI 420 stainless steel by low temperature plasma nitriding, Applied Surface Science, Vol. 254, 5953-5958.10.1016/j.apsusc.2008.03.189]Search in Google Scholar
[92. Xu B., Zhang Y. (1986), Collision dissociation model in ion-nitriding, 5th International Congress on Heat Treatment of Materials, 1086-1093.]Search in Google Scholar
[93. Zlatanović M., Popović I. (2010), Gas discharge static characteristics in pulse regime, Contemporary Materials, Vol. 1, 138-143.]Search in Google Scholar
