One of the biggest threats of our century is a world without antibiotics. The discovery of penicillin by Alexander Fleming in 1928 paved the way for a revolution in human medicine. While receiving the Nobel Prize in 1945, Fleming warned that it is straightforward to make bacteria resistant to penicillin by exposing them to low doses of this antibiotic. He also predicted that antibiotics would be easily accessible to everyone in the future, and they will carry a risk of their unwise and improper use (Nobel Lectures 1964). This speech turned out prophetic, and currently, over 90 years after discovering penicillin, antibiotic resistance is spreading rapidly worldwide, causing a crisis to public health. The following are the well-known causes of the spread of antibiotic resistance: overuse of antibiotics in agriculture, veterinary, and human medicine; use of antibiotics as growth promoters; illegal and uncontrolled antibiotic markets; and use of antibiotics without taking a preliminary antibiotic resistance test. We are trying to limit this phenomenon by implementing global and national monitoring programs, conducting information campaigns for medical workers and patients, promoting the proper utilization of waste and sewage from hospitals, and forbidding the use of antibiotics as growth promoters. However, this could not be enough.
The mechanism that lies behind the spreading of antibiotic resistance is dependent on bacterial genetics. Genes responsible for antibiotic resistance are often located on mobile genetic elements transmitted between two cells. This process of exchange, called horizontal gene transfer (HGT), is hazardous because it can also occur between two different species. Compared to animals or plants, the generation time of microorganisms is extremely short. It means that when HGT occurred, within the next few hours, there would be not just one cell with a new resistance gene but a whole population of resistant cells.
To fully understand the mechanism underlying the spread of antibiotic resistance determinants, it is reasonable to study the whole resistome of bacteria in various environments (von Wintersdorff et al. 2016). Resistome is a pool of the existing antimicrobial resistance genes, including the regularly expressed genes, silent genes, and gene precursors, which exhibit different expression levels, and resistance genes from nonpathogenic strains (Nesme and Simonet 2015). The microbiological studies are focused on antimicrobial resistance phenotypes that are already present in the environment. Discussing this problem, we want to demonstrate that studies on a huge pool of genes can reveal the origin of antibiotic resistance genes that appear and spread within bacteria.
Silent genes, also called cryptic ones, are DNA sequences that are not normally expressed or expressed at a very low level. It is natural that not every bacterial gene is expressed at once, but silent genes are silent even when they should be expressed. For example, antibiotic resistance genes should be expressed in the presence of an antibiotic, and lack of their expression leads to a lack of protection. Also, the genes encoding antibiotics should be expressed when other concurrent or enemy bacterial species are in the vicinity. It leads to the conclusion that silent genes are unneeded residues and do not play an essential role in the life cycle of bacteria.
A fact that makes silent genes intriguing is that they may become active after mutation (e.g., insertion) or recombination. Like every normal gene, they can also spread through HGT (Hall et al. 1983). It was proved that silent genes could become active after being transferred to a new host; for example, the silent
Some researchers have undermined the existing silent genes and claimed that many are silent only in laboratory conditions but are normally expressed in the natural environment. Tamburini and Mastromei (2000) proposed that silent genes should not be treated as genes with a unique regulation pattern but rather as those encoding the unusual function. Laboratory conditions are only an approximation of the natural environment that can influence bacterial phenotype. However, using the argument of “laboratory conditions” to explain the silent genes phenomenon may be too simplistic.
In contrast to Tamburini and Mastromei, some other publications supported the existence of silent genes. Lanz et al. (2003) claimed that silent genes could be a source of new resistance phenotypes. Their study suggested that silent forms of genes are not so rare, and therefore, in future studies on antimicrobial resistance, not only phenotypic resistance strains but also susceptible ones should be taken into account. Enne et al. (2008) postulated not to ignore the potential of the reservoir of silent genes because they can spread among bacteria belonging to different genera and can become active. There is a possibility that the studies not taking the silent genes into account could underestimate the antimicrobial resistance potential of the bacterial population.
In 2016, Fernandes et al. reported the results of their study on colistin-resistant
Several mechanisms associated with the lack of gene expression have been identified. In general, genes are silent because of three main reasons: (1) mutations, (2) adverse side effects of normal gene regulation, acquisition and manage systems, (3) simplified laboratory conditions and limitations or mistake in bacteria handling.
Mutations. Even a single-nucleotide mutation can turn a fully expressing gene into nonfunctional. This loss of a function can be compensated or rarely reversed (Andersson 2003).
Adverse side effects of normal gene regulation, acquisition, and management systems.
Gene expression regulator errors. Positive and negative regulators modulate gene expression. Sometimes, genes remain silent due to a strong negative transcriptional regulator or a defective promoter or regulatory gene (Sánchez and Demain 2015).
Degenerated gene clusters. Loss of some crucial genes from a large cluster can cause the remaining genes to become silent (Sánchez and Demain 2015).
Structure of integrons. Gene cassettes, carried by integrons, are located at a different distance from the promoter, and other gene positions can lead to a low expression or even completely silencing. Rearrangements and the catching of new cassettes may occur within the integron, which may activate or deactivate gene expression (Hanau-Berçot et al. 2002).
Xenogeneic silencing protein activity. Three main groups of proteins selectively silence the expression of xenogeneic DNA sequences: the H-NS (Histone-like Nucleoid Structuring) protein of Gram-negative bacteria, the MvaT-like proteins of
Simplified laboratory conditions and limitations or mistakes in bacteria handling. The primary conditions that we use for culture bacteria may also cause “side effects” for the expression of genes encoding secondary metabolites. It was shown that the composition of the culture medium might significantly influence antimicrobial resistance gene expression. The alarmone ppGpp, produced during carbon and/or amino acid starvation, positively regulates the
In a case of therapeutic failure or for more effective antibiotic discovery, various management strategies could be developed. What is worthy of notice, according to reasons of gene silencing, various types of genes could be potentially silence, and genes related to antimicrobial resistance or antimicrobial production are only an example of this phenomenon. There is a lack of complete and cross-sectional studies on silent genes, especially the silent antimicrobial resistance ones. The data available on these genes in the literature are insufficient and sometimes inconclusive or even contradictory. Depending on the antibiotic and the gene encoding antimicrobial resistance, the prevalence of silent genes encoding this function could be very low, for example, 0.16% for the
Prevalence of silent antimicrobial resistance genes in different bacteria species.
Microorganism | Gene | Number of strains tested | Number of susceptible strains carrying antimicrobial resistance genes | Percent of susceptible strains carrying antimicrobial resistance genes | Reference | |
---|---|---|---|---|---|---|
Aminoglycoside: streptomycin | 172 | 49 | 28.49% | Lanz et al. 2003 | ||
30 | 1 | 3.33% | Ma et al. 2007 | |||
1 | 3.33% | |||||
615 | 5 | 0.81% | Enne et al. 2008 | |||
1 | 0.16% | |||||
Chloramphenicol | 40 | 16 | 40.00% | Deekshit et al. 2012 | ||
120 | 8 | 6.67% | Adesijij et al. 2014 | |||
β-lactams: carbapenem | 140 | 35 | 25.00% | Walsh 2005 | ||
31 | 5 | 16.13% | Carvalho et al. 2011 | |||
Sulfometaxazole/trimetoprim | 87 | 69 | 79.31% | Jiang et al. 2014 | ||
Tetracycline | 125 | 88 | 70.40% | Brenciani et al. 2007 | ||
Metronidazole | 206 | 12 | 5.83% | Gal and Brazier 2004 |
Additionally, most of the studies done so far are of a “case study” type where the authors have described one bacterial strain or one silent gene (Park et al. 1987; Magnet et al. 1999; Yang et al. 2004). The paradigm of studying antimicrobial resistance is mostly based on the minimal inhibitory concentration (MIC) and disk-diffusion method, which select only phenotypic resistance. Molecular methods such as polymerase chain reaction (PCR), real-time PCR, hybridization, and whole-genome sequencing (WGS) are mainly used to identify the resistance determinants only in strains with resistance phenotype. This approach is intuitive and has worked very well for many years, but in the face of new data, it may give us only a piece of knowledge of the potential of bacterial evolution.
Evaluating only the MIC values does not give a full view of the bacterial genetic potential. Is pretty well visible on the
The spreading of silent resistance genes could be a potential threat, especially in the transmission of carbapenemases in a hospital environment. Carvalho et al. (2011) reported about 31 clinical
Many different mechanisms are responsible for antimicrobial resistance. The presence of some resistance-related genes in the genome could not be enough to confer a high level of resistance. For instance,
Though uncontrolled hospital-associated spreading of antibiotic resistance genes is a big threat to public health, it might not be the most significant danger. Only a relatively small group of people exposed to antibiotics and resistance bacteria stay in hospitals, while on the outside, everyone contacts with microorganisms through food and the environment every day. The use of antibiotics in agriculture puts pressure on bacteria leading them to develop resistance. These microorganisms and antibiotic compounds are introduced into the soil with manure or plants and in the urban environment with aerosols. Not only pathogens but also the residues of antibiotics and resistant bacteria may be present in food. Moreover, while performing our routine activities, we are exposed to the determinants of antibiotic resistance. Complex surveillance and monitoring programs should be based on molecular methods, but a more appropriate strategy is to track genes and not bacteria (Smith et al. 2005; Heuer et al. 2011).
Data obtained from WGS and genome mining give strong evidence that many bacterial biosynthesis pathways are silent in laboratory conditions. Silent gene clusters were also identified in antibiotic-producing soil microbes. These observations may lead to the conclusion that many undiscovered antibiotics are present in the environment (Fields et al. 2017). Bacterial antibiotic producers are resistant to their metabolites, which allows assuming that if there are many silent antibiotic producers present in the environment, several silent antibiotic resistance determinants also exist (Cantón 2009; Davies and Davies 2010).
It was found that silent genes can be activated in laboratory conditions using different tactics that can be combined into three groups: pleiotropic, targeted genome-wide, and biosynthetic gene cluster (BGC) approaches. Pleiotropic ones include ribosome engineering, chromatin remodeling, global regulation of genes, use of phosphopantetheine transferases (PPTases), and “one strain many compounds” approach (OSMAC). Reporter-guided mutant selection (RGMS) and the use of elicitors are targeted genome-wide methods. BGC approaches include refactoring, heterologous expression, cluster-situated regulators, and promoter exchange (Baral et al. 2018).
Koskiniemi et al. (2011) described clinical
Kime at al. (2019) showed that transient silencing of antibiotic resistance by mutation (SARM) represents a significant potential source of unexpected therapeutic failure. Among 1,470 isolates of
Supercoil nucleoid structures, which are identical to nucleoid-associated proteins or various RNAs, can restrict access to DNA and modulate the expression of bacterial genes (Baral et al. 2018). HN-S proteins organize these structures by attaching to their promoter region and causing loop formation, which traps RNAP and represses the gene expression (Dorman and Deighan 2003). As their name implies, HN-S proteins play an analogical role like histone proteins in eukaryotic cells, but they are different in structure and at the sequence level. Histone functions are controlled by histone deacetylases (HDACs). These enzymes are members of a large, ancient enzyme family and are present in animals, plants, fungi, and bacteria. Advanced researches indicated that HDACs evolved independently from histone or HN-S proteins (Gregoretti et al. 2004), suggesting that HN-S can be modified, just like histones; however, there is no evidence that bacterial HDACs target HN-S proteins (Hamon and Cossart 2008).
The basic of the OSMAC approach involves modulation of the cultivation conditions by changing the temperature, supplementation of the medium, or co-culturing with other microorganisms, which can enhance gene expression or activate the silent gene clusters (Baral et al. 2018). It was shown that co-culturing two strains of different species or genera might induce the expression of silent genes; for example,
According to the current state of knowledge, antibiotics or growth inhibitors can regulate the production of secondary metabolites. These molecules can be synthesized and secreted in co-culture by one microorganism and stimulate the expression of silent gene clusters in the other microorganism (Okada and Seyedsayamdost 2017). The rare earth elements (REEs) can play an essential role in the activation of silent genes. Metals from this group are defined as lanthanides plus yttrium and scandium. It was shown that scandium and lanthanum forced
Primary metabolism pathways are controlled by the enzyme PPTase. This protein catalyzes the posttranslational modifications that activate the fatty acid carrier protein domain or peptidyl carrier protein domain in
Silent genes can also be activated by adding N-acetylglucosamine (GlcNAc) to the culture medium. The transcription of the genes responsible for the transport and catabolism of GlcNAc is repressed by YvoA (NagR) in
Resistance can also be silenced by expressing an intact resistance to antibiotic gene systems (Enne et al. 2008). Moreover, the process of gene silencing is reversible. According to the results presented by Enne et al. (2008), the mechanism by which it happens is unknown. Recovery of the genes has been observed in a small part of the bacterial population analyzed. In the conducted experiment, potential silencing of the resistance genes
RGMS is a method developed by Yang et al. (2004), combining cloning in front of the double reporter system and genome-wide mutagenesis. This method randomly activates secondary metabolism pathways, switching on the signal that enables the selection of strains with the desired phenotype (Baral et al. 2018). Another genome-wide approach is to use small molecules that can activate silent genes – elicitors. This method is based on the release of signals from green fluorescent protein or
It is well known that gene expression is controlled by many factors, including activators and repressors. Overexpression of a transcriptional activator replaces a native nonfunctional promoter, while deletion or damage of a transcriptional repressor can stimulate bacteria to produce secondary metabolites (Zhang et al. 2019). In addition, the incorporation of insertion sequences, which are short pieces of DNA that encode their transcription, could alter the expression of other genes (Courvalin 2008).
Contemporary genetic tools offer the opportunity to “rewrite” a sequence of silent bacterial gene clusters. For this, noncoding fragments are removed to eliminate internal regulation, and then DNA with a sequence that is possibly far from wild type is chosen. The recoded genes are combined in a new, artificial operon under the control of synthetic ribosome-binding sites (Temme et al. 2012). Refactoring includes heterologous expression in a surrogate host; for example, a refactored gene cluster encoding taromycin, from
To investigate the gene propagation pathways, one must put resistome and genotype on the first plan instead of phenotype. Due to HGT, genetic determinants do not belong to only one genus. A continuous flow of genes lets some pool of DNA spread freely, breaking the boundaries of species and forcing us to look at the spreading of antibiotic resistance differently.
When considering the role of silent genes, it is advisable to look at two aspects: their significance in the environment and bacterial evolution and their effect on human medicine, industry, and agriculture.
Two concepts are proposed for the development of antibiotic resistance and the spreading of antibiotic resistance genes. The first one is based on antibiotic pressure, which can result in mutations activating a dormant (or silent) resistance gene so that it can express a resistance phenotype in the emergence of new genes by mutations. The second concept is based on the transfer of antibiotic resistance determinants from natural antibiotic producers to pathogenic bacteria (Andremont 2001; Martins et al. 2013). Both these phenomena have been reported by many studies (Barlow and Hall 2002; Andersson 2003; Maisnier-Patin and Andersson 2004; Toprak et al. 2012; Safi et al. 2013; Perron et al. 2015; Holmes et al. 2016), and it is hard to imagine an evolution engine without mutations or HGT. Silent antimicrobial genes can be activated under antibiotic pressure, and it has been demonstrated that environmental conditions have an influence on gene selection and expression, and on the other hand, that microorganisms already have great genetic potential and prepared “answers” for the changing conditions (Rowe-Magnus et al. 2002). Silent genes could also be considered as residues of recent antibiotic exposure, but the available data do not support this thesis (Wright 2007).
The existence of silent antimicrobial genes might have a significant influence on the survival and evolution of bacteria. Considering the role of silent genes, we should remember that silent antimicrobial genes are not always really silent. Regardless of how advanced and proven they may be, laboratory analyses are only an approximation and simplification of the real conditions. Bacterial strains are tested one by one, without the environmental context, which undeniably influences the gene expression and microbial phenotype.
The discovery of silent genes or genes not expressed in standard laboratory conditions opens a world full of new possibilities. Current tools and advances in molecular biology give us the hope of finding new antimicrobials expressed naturally by microorganisms from silent gene clusters. The existence of “sleeping” antimicrobial genes in bacterial genomes indicates the determinants of “sleeping” antimicrobial resistance. However, the evidence available for this phenomenon is not clear (Martins et al. 2013).
Apart from the natural occurrence of silent antimicrobial resistance genes, it is suggested that methods can be developed for targeting silencing genes. Despite many concerns, these methods may allow leading or controlling the evolution of antimicrobial resistance (Wright 2007). For instance, AcrAB-TolC efflux pump is involved in the resistance of bacteria to numerous substances such as macrolides and some lactams. Silencing
Bacterial silent gene clusters are mostly sought and studied because it is believed that they may encode secondary metabolites important for human medicine, such as antibiotics, and for industrial applications (Rigali et al. 2018). Thus, their potential seems to be enormous. It has been estimated that more than 90% of the microbial metabolites are not expressed under standard laboratory conditions (Yan et al. 2018).
If estimates are valid, a significant part of the bacterial genome is silent in laboratory conditions. It means that there is a vast world of secondary metabolism proteins that may have a significant influence on the adaptation and evolution of bacteria and play a significant role in human and veterinary medicine and agriculture. Exploration of silent genes, as a part of resistome, may help find new biochemical pathways and establish dependencies that are not visible in standard laboratory conditions. It can also be seen as a chance to find new antimicrobials and protect bacteria from acquiring antimicrobial resistance.