<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article presents research conducted with the project: ‘Additive manufacturing in conduction with optical methods used for optimization of 3D models’’ [2]. The article begins with the description of properties of the materials used in three different additive technologies – Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS) and Material Jetting (MJ). The next part focuses on the comparative analysis of macro- and microstructure of specimens printed in order to test selected materials in additive technologies mentioned above. In this research two types of specimens were used: dumbbell specimens and rectangular prism with hole specimens. In order to observe macrostructure specimens, they were subjected to load test until it broke. In the case of observing microstructure, they were cut in some places. Each of described additive technologies characterizes by both different way of printing and used materials. These variables have a significant influence on macro- and microstructure and fracture appearance. FDM technology specimens printed of ABS material characterized by texture surface appearance. SLS technology specimens printed of PA12 material characterized by amorphous structure. MJ technology specimens printed of VeroWhite Plus material characterized by fracture appearance which had quasi- fatigue features. The microstructure of these specimens was uniform with visible inclusions.</p>
</abstract>

The article presents research conducted with the project: ‘Additive manufacturing in conduction with optical methods used for optimization of 3D models’’ [2]. The article begins with the description of properties of the materials used in three different additive technologies – Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS) and Material Jetting (MJ). The next part focuses on the comparative analysis of macro- and microstructure of specimens printed in order to test selected materials in additive technologies mentioned above. In this research two types of specimens were used: dumbbell specimens and rectangular prism with hole specimens. In order to observe macrostructure specimens, they were subjected to load test until it broke. In the case of observing microstructure, they were cut in some places. Each of described additive technologies characterizes by both different way of printing and used materials. These variables have a significant influence on macro- and microstructure and fracture appearance. FDM technology specimens printed of ABS material characterized by texture surface appearance. SLS technology specimens printed of PA12 material characterized by amorphous structure. MJ technology specimens printed of VeroWhite Plus material characterized by fracture appearance which had quasi- fatigue features. The microstructure of these specimens was uniform with visible inclusions.

Comparative Analysis of Macro- and Microstructure of Printed Elements in the FDM, SLS and MJ Technologies

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The article presents research conducted with the project: ‘Additive manufacturing in conduction with optical methods used for optimization of 3D models’’ [2]....

Comparative Analysis of Macro- and Microstructure of Printed Elements in the FDM, SLS and MJ Technologies

Pubblicato online: 26 dic 2019

Pagine: 66 - 80

DOI: https://doi.org/10.2478/tar-2019-0024

Parole chiave
additive manufacturing, 3D printing, macrostructure, microstructure, FDM, SLS, MJ, PolyJet

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Comparative Analysis of Macro- and Microstructure of Printed Elements in the FDM, SLS and MJ Technologies

Pubblicato online: 26 dic 2019

Pagine: 66 - 80

DOI: https://doi.org/10.2478/tar-2019-0024

Parole chiaveadditive manufacturing, 3D printing, macrostructure, microstructure, FDM, SLS, MJ, PolyJet

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
additive manufacturing, 3D printing, macrostructure, microstructure, FDM, SLS, MJ, PolyJet