Experimental bearing capacity of eccentrically loaded foundation near a slope

[1]Algin, H. M. & Halil, M. (2009). Elastic settlement under eccentrically loaded rectangular surface footings on sand deposits. Journal of Geotechnical and Geoenvironmental Engineering .13510, pp. 1499–1508AlginH. MHalilM2009Elastic settlement under eccentrically loaded rectangular surface footings on sand depositsJournal of Geotechnical and Geoenvironmental Engineering135101499150810.1061/(ASCE)GT.1943-5606.0000113Search in Google Scholar

[2]Azzouz, A. S. & Baligh, M. M. (1983). Loaded areas on cohesive slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1983)109:5(724), pp. 724–729AzzouzA. SBalighM. M1983Loaded areas on cohesive slopesJ. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1983)109572472472910.1061/(ASCE)0733-9410(1983)109:5(724)Search in Google Scholar

[3]Badakhshan, E. & Noorzad, A. (2015). Load eccentricity effects on behaviour of circular footings reinforced with geogrid sheets. Journal of Rock Mechanics and Geotechnical Engineering7(6), 691–699. https://doi.org/10.1016/j.jrmge.2015.08.006BadakhshanENoorzadA2015Load eccentricity effects on behaviour of circular footings reinforced with geogrid sheetsJournal of Rock Mechanics and Geotechnical Engineering76691699https://doi.org/10.1016/j.jrmge.2015.08.00610.1016/j.jrmge.2015.08.006Search in Google Scholar

[4]Badakhshan, E. & Noorzad, A. (2017). Effect of footing shape and load eccentricity on behaviour of geosynthetic reinforced sand bed. Geotextiles and Geomembranes volume 45 issue 2, pp. 58–67BadakhshanENoorzadA2017Effect of footing shape and load eccentricity on behaviour of geosynthetic reinforced sand bedGeotextiles and Geomembranesvolume45issue2586710.1016/j.geotexmem.2016.11.007Search in Google Scholar

[5]Bowles, J. E. (1988). Foundation analysis and design. Mc Graw-Hill, New York 4th edBowlesJ. E1988Foundation analysis and designMc Graw-Hill, New York4thSearch in Google Scholar

[6]Bushra, S. A. & Rusul, S. H. (2013). Bearing capacity of eccentrically loaded square foundation on compacted reinforced dune sand over gypseous soil. Paper presented at journal of earth sciences and geotechnical engineering, vol 3 no. 4, pp. 47–62BushraS. ARusulS. H2013Bearing capacity of eccentrically loaded square foundation on compacted reinforced dune sand over gypseous soilPaper presented at journal of earth sciences and geotechnical engineeringvol344762Search in Google Scholar

[7]Cure, E., Turker, E., & Uzuner, B. A. (2014). Analytical and experimental study for ultimate loads of eccentrically loaded model strip footings near a sand slope. Ocean Engineering89 113–118. https://doi.org/10.1016/j.oceaneng.2014.07.018CureETurkerEUzunerB. A2014Analytical and experimental study for ultimate loads of eccentrically loaded model strip footings near a sand slopeOcean Engineering89113–118https://doi.org/10.1016/j.oceaneng.2014.07.01810.1016/j.oceaneng.2014.07.018Search in Google Scholar

[8]Georgiadis, K. (2010). Undrained bearing capacity of strip footings on slopes. J. Geotech. Eng. 10.1061 / (ASCE) GT.1943-5606.0000269 ,pp. 677–685GeorgiadisK2010Undrained bearing capacity of strip footings on slopesJ. Geotech. Eng. 10.1061(ASCE) GT.1943-5606.000026967768510.1061/(ASCE)GT.1943-5606.0000269Search in Google Scholar

[9]Ghosh, P. & Kumar, J. (2005). Seismic bearing capacity of strip footings adjacent to slopes using the upper bound limit analysis. Electron.J.Geotech.Eng.10, bundleGhoshPKumarJ2005Seismic bearing capacity of strip footings adjacent to slopes using the upper bound limit analysisElectron.J.Geotech.Eng.10, bundleSearch in Google Scholar

[10]Graham, J., Andrews, M. & Shields, D. H. (1988). Stress characteristics for shallow footings in cohesionless slopes. Can. Geotech. J. 25(2), pp. 238–249GrahamJAndrewsMShieldsD. H1988Stress characteristics for shallow footings in cohesionless slopesCan. Geotech. J25223824910.1139/t88-028Search in Google Scholar

[11]Griffiths, D. V. (1982). Computation of bearing capacity factors using finite elements. Geotechnique, 32(3), pp. 105–202GriffithsD. V1982Computation of bearing capacity factors using finite elementsGeotechnique32310520210.1680/geot.1982.32.3.195Search in Google Scholar

[12]Highter, W.H. & ANDERS, J.C. (1985). Dimensioning footings subjected to eccentric loads. ASCE Journal of Geotechnical Engineering, 111 No. 5 pp. 659–665HighterW.HANDERSJ.C1985Dimensioning footings subjected to eccentric loadsASCE Journal of Geotechnical Engineering111565966510.1061/(ASCE)0733-9410(1985)111:5(659)Search in Google Scholar

[13]Khitas, N. E. H., Benmeddour, D., Mellas, M. & Mabrouki, A. (2017). The undrained bearing capacity of strip footings under eccentric loading: effect of soil-footing interface tensile strength. International Journal of Geotechnical Engineering 1–7. https://doi.org/10.1080/19386362.2017.1416570KhitasN. E. HBenmeddourDMellasMMabroukiA2017The undrained bearing capacity of strip footings under eccentric loading: effect of soil-footing interface tensile strengthInternational Journal of Geotechnical Engineering17https://doi.org/10.1080/19386362.2017.141657010.1080/19386362.2017.1416570Search in Google Scholar

[14]Krabbenhoft, S., Damkilde, L. & Krabbenhoft, K. (2014). Bearing capacity of strip footings in cohesionless soil subject to eccentric and inclined loads. International Journal of Geomechanics14(3), 04014003. https://doi.org/10.1061/(asce)gm.1943-5622.0000332KrabbenhoftSDamkildeLKrabbenhoftK2014Bearing capacity of strip footings in cohesionless soil subject to eccentric and inclined loadsInternational Journal of Geomechanics14304014003https://doi.org/10.1061/(asce)gm.1943-5622.000033210.1061/(ASCE)GM.1943-5622.0000332Search in Google Scholar

[15]Kusakabe, O., Kimura, T. & Yamaguchi, H. (1981). Bearing capacity of slopes under strip loads on the top surfaces. Soils Found. 21(4), pp. 29–40KusakabeOKimuraTYamaguchiH1981Bearing capacity of slopes under strip loads on the top surfacesSoils Found214294010.3208/sandf1972.21.4_29Search in Google Scholar

[16]Mabrouki, A. & al. (2016). 2D numerical analysis of shallow foundation rested near slope under inclined loading. Procedia Engineering volume 143 pp. 623–634MabroukiA20162D numerical analysis of shallow foundation rested near slope under inclined loadingProcedia Engineering volume14362363410.1016/j.proeng.2016.06.086Search in Google Scholar

[17]Mahiyar, H. & Patel, A. N. (2000). Analysis of angle shaped footing under eccentric loadingMahiyarHPatelA. N2000Analysis of angle shaped footing under eccentric loadingJ .Geotech. Geoenviron. Eng. 10.1061/ (ASCE) 1090-0241(2000)12612(1151)1151115610.1061/(ASCE)1090-0241(2000)126:12(1151)Search in Google Scholar

[18]Meyerhof, G.G. (1953). The bearing capacity of foundations under eccentric and inclined loads. In proc. of the 3rd Int. Conf, on SMFE .vol 1 pp. 440–445MeyerhofG.G1953The bearing capacity of foundations under eccentric and inclined loadsIn proc. of the 3rd Int. Conf, on SMFEvol1440445Search in Google Scholar

[19]Meyerhof, G. G. (1957). The ultimate bearing capacity of foundations on slopes. ” Proceedings of the 4th Int. conf. S.M.F.E., vol. 3 pp. 384–386MeyerhofG. G1957The ultimate bearing capacity of foundations on slopes” Proceedings of the 4th Int. conf. S.M.F.E3384386Search in Google Scholar

[20]Meyerhof, G. G. (1963). Some recent research on the bearing capacity of foundations. Canadian Geotechnical Journal, vol. I No. 1, pp. 16–26MeyerhofG. G1963Some recent research on the bearing capacity of foundationsCanadian Geotechnical JournalvolI1162610.1139/t63-003Search in Google Scholar

[21]Ouahab, M. Y., Mabrouki, A., Mellas, M., & Benmeddour, D. (2018). Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock. Transportation Infrastructure Geotechnology5(2), 169–186. https://doi.org/10.1007/s40515-018-0055-0OuahabM. YMabroukiAMellasMBenmeddourD2018Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrockTransportation Infrastructure Geotechnology52169186https://doi.org/10.1007/s40515-018-0055-010.1007/s40515-018-0055-0Search in Google Scholar

[22]Peynircioglu, H. (1948). Tests on bearing capacity of shallow` foundations horizontal top surfaces of sand fills and the behaviour of soils under such foundations. Proc., 2nd Int. Conf. On soil mechanics and foundation engineering, Rotterdam, Netherlands pp. 144–205PeynirciogluH1948Tests on bearing capacity of shallow` foundations horizontal top surfaces of sand fills and the behaviour of soils under such foundationsProc., 2nd Int. Conf. On soil mechanics and foundation engineering, Rotterdam, Netherlands144205Search in Google Scholar

[23]Prakash, S. & Saran, S. (1971). Bearing capacity of eccentrically loaded footings. Journal of SM & FE division, ASCE 97 pp. 901–921PrakashSSaranS1971Bearing capacity of eccentrically loaded footingsJournal of SM & FE division, ASCE9790192110.1061/JSFEAQ.0001544Search in Google Scholar

[24]Prandtl, G. (1921). Eindringen steifigkeit und festigkeit von schneiden, Angew. Math. U. Mech1 15PrandtlG1921Eindringen steifigkeit und festigkeit von schneiden, AngewMath. U. Mech11510.1002/zamm.19210010102Search in Google Scholar

[25]Purkayastha, R. D. & Char, R. A. (1977). Stability analysis for eccentrically loaded footings. J. Geotech. Eng. 103(6), pp. 647–651PurkayasthaR. DCharR. A1977Stability analysis for eccentrically loaded footingsJ. Geotech. Eng103664765110.1061/AJGEB6.0000441Search in Google Scholar

[26]Ramlot, C. & Vandeperre, L. (1950). Electric pylons of foundations: Their resistance to overturning their stability, their calculation. Research rep 2 IRSIA, FranceRamlotCVandeperreL1950Electric pylons of foundations: Their resistance to overturning their stability, their calculationResearch rep. 2IRSIAFranceSearch in Google Scholar

[27]Shields, D., Neil, C. & Jacques, G. (1990). Bearing capacity of foundations in slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1990)116:3(528), pp. 528–537ShieldsDNeilCJacquesG1990Bearing capacity of foundations in slopesJ. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1990)116352852853710.1061/(ASCE)0733-9410(1990)116:3(528)Search in Google Scholar

[28]Shukla, R. P. & Jakka, R. S. (2017). Critical setback distance for a footing resting on slopes. Acta Geotechnica SlovenicaShuklaR. PJakkaR. S2017Critical setback distance for a footing resting on slopesActa Geotechnica SlovenicaSearch in Google Scholar

[29]Terzaghi, K. (1943). Theoretical soil mechanics. Wiley and sons Inc New York5th edTerzaghiK1943Theoretical soil mechanicsWiley and sons Inc New York5th ed10.1002/9780470172766Search in Google Scholar

[30]Ueno, K., Miura, K. & Maeda, Y. (1998). Prediction of ultimate bearing capacity of surface footing with regard to size effects. Soils found .38(3), pp. 165–178UenoKMiuraKMaedaY1998Prediction of ultimate bearing capacity of surface footing with regard to size effectsSoils found38316517810.3208/sandf.38.3_165Search in Google Scholar

[31]Vesic, A.S. (1973b). Analysis of ultimate loads of shallow foundations. J. Soil mech. Found.Div, ASCE 99 No. SM1, 45–73VesicA.S1973bAnalysis of ultimate loads of shallow foundationsJ. Soil mech. Found.Div, ASCE99SM145–7310.1016/0148-9062(74)90598-1Search in Google Scholar

[32]Zhu, F. (1998). Centrifuge modelling and numerical analysis of bearing capacity of ring foundations on sand. Facdty of engineering and applied science Mernorial university of new foundlandZhuF1998Centrifuge modelling and numerical analysis of bearing capacity of ring foundations on sandFacdty of engineering and applied science Mernorial university of new foundlandSearch in Google Scholar