This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
Algin, H. M. & Halil, M. (2009). Elastic settlement under eccentrically loaded rectangular surface footings on sand deposits. Journal of Geotechnical and Geoenvironmental Engineering .13510, pp. 1499–1508AlginH. MHalilM2009Elastic settlement under eccentrically loaded rectangular surface footings on sand deposits135101499150810.1061/(ASCE)GT.1943-5606.0000113Search in Google Scholar
Azzouz, A. S. & Baligh, M. M. (1983). Loaded areas on cohesive slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1983)109:5(724), pp. 724–729AzzouzA. SBalighM. M1983Loaded areas on cohesive slopes572472472910.1061/(ASCE)0733-9410(1983)109:5(724)Search in Google Scholar
Badakhshan, E. & Noorzad, A. (2015). Load eccentricity effects on behaviour of circular footings reinforced with geogrid sheets. Journal of Rock Mechanics and Geotechnical Engineering7(6), 691–699. https://doi.org/10.1016/j.jrmge.2015.08.006BadakhshanENoorzadA2015Load eccentricity effects on behaviour of circular footings reinforced with geogrid sheets76691699https://doi.org/10.1016/j.jrmge.2015.08.00610.1016/j.jrmge.2015.08.006Search in Google Scholar
Badakhshan, E. & Noorzad, A. (2017). Effect of footing shape and load eccentricity on behaviour of geosynthetic reinforced sand bed. Geotextiles and Geomembranes volume 45 issue 2, pp. 58–67BadakhshanENoorzadA2017Effect of footing shape and load eccentricity on behaviour of geosynthetic reinforced sand bedvolume45issue2586710.1016/j.geotexmem.2016.11.007Search in Google Scholar
Bowles, J. E. (1988). Foundation analysis and design. Mc Graw-Hill, New York 4th edBowlesJ. E1988Mc Graw-Hill, New York4thSearch in Google Scholar
Bushra, S. A. & Rusul, S. H. (2013). Bearing capacity of eccentrically loaded square foundation on compacted reinforced dune sand over gypseous soil. Paper presented at journal of earth sciences and geotechnical engineering, vol 3 no. 4, pp. 47–62BushraS. ARusulS. H2013Bearing capacity of eccentrically loaded square foundation on compacted reinforced dune sand over gypseous soilvol344762Search in Google Scholar
Cure, E., Turker, E., & Uzuner, B. A. (2014). Analytical and experimental study for ultimate loads of eccentrically loaded model strip footings near a sand slope. Ocean Engineering89 113–118. https://doi.org/10.1016/j.oceaneng.2014.07.018CureETurkerEUzunerB. A2014Analytical and experimental study for ultimate loads of eccentrically loaded model strip footings near a sand slope89113–118https://doi.org/10.1016/j.oceaneng.2014.07.01810.1016/j.oceaneng.2014.07.018Search in Google Scholar
Georgiadis, K. (2010). Undrained bearing capacity of strip footings on slopes. J. Geotech. Eng. 10.1061 / (ASCE) GT.1943-5606.0000269 ,pp. 677–685GeorgiadisK2010Undrained bearing capacity of strip footings on slopes(ASCE) GT.1943-5606.000026967768510.1061/(ASCE)GT.1943-5606.0000269Search in Google Scholar
Ghosh, P. & Kumar, J. (2005). Seismic bearing capacity of strip footings adjacent to slopes using the upper bound limit analysis. Electron.J.Geotech.Eng.10, bundleGhoshPKumarJ2005Seismic bearing capacity of strip footings adjacent to slopes using the upper bound limit analysisSearch in Google Scholar
Graham, J., Andrews, M. & Shields, D. H. (1988). Stress characteristics for shallow footings in cohesionless slopes. Can. Geotech. J. 25(2), pp. 238–249GrahamJAndrewsMShieldsD. H1988Stress characteristics for shallow footings in cohesionless slopes25223824910.1139/t88-028Search in Google Scholar
Griffiths, D. V. (1982). Computation of bearing capacity factors using finite elements. Geotechnique, 32(3), pp. 105–202GriffithsD. V1982Computation of bearing capacity factors using finite elements32310520210.1680/geot.1982.32.3.195Search in Google Scholar
Highter, W.H. & ANDERS, J.C. (1985). Dimensioning footings subjected to eccentric loads. ASCE Journal of Geotechnical Engineering, 111 No. 5 pp. 659–665HighterW.HANDERSJ.C1985Dimensioning footings subjected to eccentric loads111565966510.1061/(ASCE)0733-9410(1985)111:5(659)Search in Google Scholar
Khitas, N. E. H., Benmeddour, D., Mellas, M. & Mabrouki, A. (2017). The undrained bearing capacity of strip footings under eccentric loading: effect of soil-footing interface tensile strength. International Journal of Geotechnical Engineering 1–7. https://doi.org/10.1080/19386362.2017.1416570KhitasN. E. HBenmeddourDMellasMMabroukiA2017The undrained bearing capacity of strip footings under eccentric loading: effect of soil-footing interface tensile strength17https://doi.org/10.1080/19386362.2017.141657010.1080/19386362.2017.1416570Search in Google Scholar
Krabbenhoft, S., Damkilde, L. & Krabbenhoft, K. (2014). Bearing capacity of strip footings in cohesionless soil subject to eccentric and inclined loads. International Journal of Geomechanics14(3), 04014003. https://doi.org/10.1061/(asce)gm.1943-5622.0000332KrabbenhoftSDamkildeLKrabbenhoftK2014Bearing capacity of strip footings in cohesionless soil subject to eccentric and inclined loads14304014003https://doi.org/10.1061/(asce)gm.1943-5622.000033210.1061/(ASCE)GM.1943-5622.0000332Search in Google Scholar
Kusakabe, O., Kimura, T. & Yamaguchi, H. (1981). Bearing capacity of slopes under strip loads on the top surfaces. Soils Found. 21(4), pp. 29–40KusakabeOKimuraTYamaguchiH1981Bearing capacity of slopes under strip loads on the top surfaces214294010.3208/sandf1972.21.4_29Search in Google Scholar
Mabrouki, A. & al. (2016). 2D numerical analysis of shallow foundation rested near slope under inclined loading. Procedia Engineering volume 143 pp. 623–634MabroukiA20162D numerical analysis of shallow foundation rested near slope under inclined loading14362363410.1016/j.proeng.2016.06.086Search in Google Scholar
Mahiyar, H. & Patel, A. N. (2000). Analysis of angle shaped footing under eccentric loadingMahiyarHPatelA. N2000Analysis of angle shaped footing under eccentric loading12(1151)1151115610.1061/(ASCE)1090-0241(2000)126:12(1151)Search in Google Scholar
Meyerhof, G.G. (1953). The bearing capacity of foundations under eccentric and inclined loads. In proc. of the 3rd Int. Conf, on SMFE .vol 1 pp. 440–445MeyerhofG.G1953The bearing capacity of foundations under eccentric and inclined loadsvol1440445Search in Google Scholar
Meyerhof, G. G. (1957). The ultimate bearing capacity of foundations on slopes. ” Proceedings of the 4th Int. conf. S.M.F.E., vol. 3 pp. 384–386MeyerhofG. G1957The ultimate bearing capacity of foundations on slopes3384386Search in Google Scholar
Meyerhof, G. G. (1963). Some recent research on the bearing capacity of foundations. Canadian Geotechnical Journal, vol. I No. 1, pp. 16–26MeyerhofG. G1963Some recent research on the bearing capacity of foundationsvolI1162610.1139/t63-003Search in Google Scholar
Ouahab, M. Y., Mabrouki, A., Mellas, M., & Benmeddour, D. (2018). Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock. Transportation Infrastructure Geotechnology5(2), 169–186. https://doi.org/10.1007/s40515-018-0055-0OuahabM. YMabroukiAMellasMBenmeddourD2018Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock52169186https://doi.org/10.1007/s40515-018-0055-010.1007/s40515-018-0055-0Search in Google Scholar
Peynircioglu, H. (1948). Tests on bearing capacity of shallow` foundations horizontal top surfaces of sand fills and the behaviour of soils under such foundations. Proc., 2nd Int. Conf. On soil mechanics and foundation engineering, Rotterdam, Netherlands pp. 144–205PeynirciogluH1948Tests on bearing capacity of shallow` foundations horizontal top surfaces of sand fills and the behaviour of soils under such foundations144205Search in Google Scholar
Prakash, S. & Saran, S. (1971). Bearing capacity of eccentrically loaded footings. Journal of SM & FE division, ASCE 97 pp. 901–921PrakashSSaranS1971Bearing capacity of eccentrically loaded footings9790192110.1061/JSFEAQ.0001544Search in Google Scholar
Prandtl, G. (1921). Eindringen steifigkeit und festigkeit von schneiden, Angew. Math. U. Mech1 15PrandtlG1921Eindringen steifigkeit und festigkeit von schneiden, Angew11510.1002/zamm.19210010102Search in Google Scholar
Purkayastha, R. D. & Char, R. A. (1977). Stability analysis for eccentrically loaded footings. J. Geotech. Eng. 103(6), pp. 647–651PurkayasthaR. DCharR. A1977Stability analysis for eccentrically loaded footings103664765110.1061/AJGEB6.0000441Search in Google Scholar
Ramlot, C. & Vandeperre, L. (1950). Electric pylons of foundations: Their resistance to overturning their stability, their calculation. Research rep 2 IRSIA, FranceRamlotCVandeperreL1950Electric pylons of foundations: Their resistance to overturning their stability, their calculationIRSIAFranceSearch in Google Scholar
Shields, D., Neil, C. & Jacques, G. (1990). Bearing capacity of foundations in slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1990)116:3(528), pp. 528–537ShieldsDNeilCJacquesG1990Bearing capacity of foundations in slopes352852853710.1061/(ASCE)0733-9410(1990)116:3(528)Search in Google Scholar
Shukla, R. P. & Jakka, R. S. (2017). Critical setback distance for a footing resting on slopes. Acta Geotechnica SlovenicaShuklaR. PJakkaR. S2017Critical setback distance for a footing resting on slopesSearch in Google Scholar
Terzaghi, K. (1943). Theoretical soil mechanics. Wiley and sons Inc New York5th edTerzaghiK1943Wiley and sons Inc New York5th ed10.1002/9780470172766Search in Google Scholar
Ueno, K., Miura, K. & Maeda, Y. (1998). Prediction of ultimate bearing capacity of surface footing with regard to size effects. Soils found .38(3), pp. 165–178UenoKMiuraKMaedaY1998Prediction of ultimate bearing capacity of surface footing with regard to size effects38316517810.3208/sandf.38.3_165Search in Google Scholar
Vesic, A.S. (1973b). Analysis of ultimate loads of shallow foundations. J. Soil mech. Found.Div, ASCE 99 No. SM1, 45–73VesicA.S1973bAnalysis of ultimate loads of shallow foundations99SM145–7310.1016/0148-9062(74)90598-1Search in Google Scholar
Zhu, F. (1998). Centrifuge modelling and numerical analysis of bearing capacity of ring foundations on sand. Facdty of engineering and applied science Mernorial university of new foundlandZhuF1998Centrifuge modelling and numerical analysis of bearing capacity of ring foundations on sandSearch in Google Scholar