This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Ziółkowski G, Chlebus E, Szymczyk P, Kurzac J. Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology. Arch Civ Mech Eng. 2014;14(4). https://doi.org/10.1016/j.acme.2014.02.003.ZiółkowskiGChlebusESzymczykPKurzacJApplication of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technologyArch Civ Mech Eng2014144https://doi.org/10.1016/j.acme.2014.02.003.10.1016/j.acme.2014.02.003Search in Google Scholar
Thompson A, Maskery I, Leach RK. X-ray computed tomography for additive manufacturing: a review. Meas Sci Technol. 2016;27(7). https://doi.org/10.1088/0957-0233/27/7/072001.ThompsonAMaskeryILeachRKX-ray computed tomography for additive manufacturing: a reviewMeas Sci Technol2016277https://doi.org/10.1088/0957-0233/27/7/072001.10.1088/0957-0233/27/7/072001Search in Google Scholar
Gapinski B, Janicki P, Marciniak-Podsadna L, Jakubowicz M. Application of the computed tomography to control parts made on additive manufacturing process. Procedia Eng. 2016;149(June):105–21. https://doi.org/10.1016/j.proeng.2016.06.645.GapinskiBJanickiPMarciniak-PodsadnaLJakubowiczMApplication of the computed tomography to control parts made on additive manufacturing processProcedia Eng2016149June10521https://doi.org/10.1016/j.proeng.2016.06.645.10.1016/j.proeng.2016.06.645Search in Google Scholar
Chatham CA, Long TE, Williams CB. A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci. 2019;93:68–95. https://doi.org/10.1016/j.progpolymsci.2019.03.003.ChathamCALongTEWilliamsCBA review of the process physics and material screening methods for polymer powder bed fusion additive manufacturingProg Polym Sci2019936895https://doi.org/10.1016/j.progpolymsci.2019.03.003.10.1016/j.progpolymsci.2019.03.003Search in Google Scholar
Stansbury JW, Idacavage MJ. 3D printing with polymers: challenges among expanding options and opportunities. Dent Mater. 2016;32(1): 54–64. https://doi.org/10.1016/j.dental.2015.09.018.StansburyJWIdacavageMJ3D printing with polymers: challenges among expanding options and opportunitiesDent Mater20163215464https://doi.org/10.1016/j.dental.2015.09.018.10.1016/j.dental.2015.09.018Search in Google Scholar
Yaagoubi H, Abouchadi H, Taha Janan M. Review on the modeling of the laser sintering process for Polyamide 12. E3S Web Conf. 2021;234:1–5. https://doi.org/10.1051/e3sconf/202123400006.YaagoubiHAbouchadiHTaha JananMReview on the modeling of the laser sintering process for Polyamide 12E3S Web Conf202123415https://doi.org/10.1051/e3sconf/202123400006.10.1051/e3sconf/202123400006Search in Google Scholar
Wohlers Associates. Wohlers Report 2020: 3D printing and additive manufacturing global state of the industry. Wohlers Associates Inc.; 2020. p. 2020.Wohlers AssociatesWohlers Report 2020: 3D printing and additive manufacturing global state of the industryWohlers Associates Inc.2020202010.31399/asm.hb.v24.a0006555Search in Google Scholar
Schmid M, Wegener K. Additive manufacturing: polymers applicable for laser sintering (LS). Procedia Eng. 149(June):457–64. https://doi.org/10.1016/j.proeng.2016.06.692.SchmidMWegenerKAdditive manufacturing: polymers applicable for laser sintering (LS)Procedia Eng149June45764https://doi.org/10.1016/j.proeng.2016.06.692.10.1016/j.proeng.2016.06.692Search in Google Scholar
Xu Z, Wang Y, Wu D, Ananth KP, Bai J. The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering. J Manuf Process. 2019;47(July): 419–26. https://doi.org/10.1016/j.jmapro.2019.07.014.XuZWangYWuDAnanthKPBaiJThe process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sinteringJ Manuf Process201947July41926https://doi.org/10.1016/j.jmapro.2019.07.014.10.1016/j.jmapro.2019.07.014Search in Google Scholar
Yusheng S, Zhichong L, Haixiao S, Shuhuai H, Fandi Z. Development of a polymer alloy of polystyrene (PS) and polyamide (PA) for building functional part based on selective laser sintering (SLS). Proc Inst Mech Eng Part L J Mater Des Appl. 2004;218(4):299–306. https://doi.org/10.1177/146442070421800404.YushengSZhichongLHaixiaoSShuhuaiHFandiZDevelopment of a polymer alloy of polystyrene (PS) and polyamide (PA) for building functional part based on selective laser sintering (SLS)Proc Inst Mech Eng Part L J Mater Des Appl20042184299306https://doi.org/10.1177/146442070421800404.10.1177/146442070421800404Search in Google Scholar
Olejarczyk M, Gruber P, Ziólkowski G. Capabilities and limitations of using Desktop 3-D printers in the laser sintering process. Appl Sci. 2020;10(18). https://doi.org/10.3390/APP10186184.OlejarczykMGruberPZiólkowskiGCapabilities and limitations of using Desktop 3-D printers in the laser sintering processAppl Sci20201018https://doi.org/10.3390/APP10186184.10.3390/app10186184Search in Google Scholar
Mertens JCE, Henderson K, Cordes NL, Pacheco R, Xiao X, Williams JJ, et al. Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography. J Mater Sci. 52(20):12185–206. https://doi.org/10.1007/s10853-017-1339-4.MertensJCEHendersonKCordesNLPachecoRXiaoXWilliamsJJAnalysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomographyJ Mater Sci522012185206https://doi.org/10.1007/s10853-017-1339-4.10.1007/s10853-017-1339-4Search in Google Scholar
Al-Maharma AY, Patil SP, Markert B. Effects of porosity on the mechanical properties of additively manufactured components: a critical review. Mater Res Express. 2020;7(12). https://doi.org/10.1088/2053-1591/abcc5d.Al-MaharmaAYPatilSPMarkertBEffects of porosity on the mechanical properties of additively manufactured components: a critical reviewMater Res Express2020712https://doi.org/10.1088/2053-1591/abcc5d.10.1088/2053-1591/abcc5dSearch in Google Scholar
Zhu Z, Majewski C. Understanding pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts: a focus on energy input. Mater Des. 2020;194:108937. https://doi.org/10.1016/j.matdes.2020.108937.ZhuZMajewskiCUnderstanding pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts: a focus on energy inputMater Des2020194108937. https://doi.org/10.1016/j.matdes.2020.108937.10.1016/j.matdes.2020.108937Search in Google Scholar
Ziółkowski G, Treter G, Tokarczyk E, Szymczyk-Ziółkowska P. New possibilities for in situ CT analysis of additive manufactured samples. Tech Trans. 2020;1–9. https://doi.org/10.37705/techtrans/e2020028.ZiółkowskiGTreterGTokarczykESzymczyk-ZiółkowskaPNew possibilities for in situ CT analysis of additive manufactured samplesTech Trans202019https://doi.org/10.37705/techtrans/e2020028.10.37705/TechTrans/e2020028Search in Google Scholar
Ziółkowski G, Gruber K, Tokarczyk E, Roszak R, Ziegenhorn M. X-ray computed tomography for the ex-situ mechanical testing and simulation of additively manufactured IN718 samples. Addit Manuf. 2021;45(January). https://doi.org/10.1016/j.addma.2021.102070.ZiółkowskiGGruberKTokarczykERoszakRZiegenhornMX-ray computed tomography for the ex-situ mechanical testing and simulation of additively manufactured IN718 samplesAddit Manuf202145Januaryhttps://doi.org/10.1016/j.addma.2021.102070.10.1016/j.addma.2021.102070Search in Google Scholar
Schob D, Sagradov I, Roszak R, Sparr H, Franke R, Ziegenhorn M, et al. Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loading. Eng Fract Mech. 2019;229(November):106841. https://doi.org/10.1016/j.engfracmech.2019.106841.SchobDSagradovIRoszakRSparrHFrankeRZiegenhornMExperimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loadingEng Fract Mech2019229November106841. https://doi.org/10.1016/j.engfracmech.2019.106841.10.1016/j.engfracmech.2019.106841Search in Google Scholar
Roszak R, Schob D, Sagradov I, Kotecki K, Sparr H, Maasch Ph, et al. Experimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12. Mech Mater. 2021;159(April): 103893. https://doi.org/10.1016/j.mechmat.2021.103893.RoszakRSchobDSagradovIKoteckiKSparrHMaaschPhExperimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12Mech Mater2021159April103893. https://doi.org/10.1016/j.mechmat.2021.103893.10.1016/j.mechmat.2021.103893Search in Google Scholar
Kok Y, Tan XP, Wang P, Nai MLS, Loh NH, Liu E, et al. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des. 2018;139:565–86. https://doi.org/10.1016/j.matdes.2017.11.021.KokYTanXPWangPNaiMLSLohNHLiuEAnisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical reviewMater Des201813956586https://doi.org/10.1016/j.matdes.2017.11.021.10.1016/j.matdes.2017.11.021Search in Google Scholar
Hou G, Zhu H, Xie D. The influence of SLS process parameters on the tensile strength of PA2200 powder. IOP Conf Ser Earth Environ Sci. 2020;571(1). https://doi.org/10.1088/1755-1315/571/1/012111.HouGZhuHXieDThe influence of SLS process parameters on the tensile strength of PA2200 powderIOP Conf Ser Earth Environ Sci20205711https://doi.org/10.1088/1755-1315/571/1/012111.10.1088/1755-1315/571/1/012111Search in Google Scholar
Craft G, Nussbaum J, Crane N, Harmon JP. Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes. Addit Manuf. 2018;22(June):800–6. https://doi.org/10.1016/j.addma.2018.06.028.CraftGNussbaumJCraneNHarmonJPImpact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processesAddit Manuf201822June8006https://doi.org/10.1016/j.addma.2018.06.028.10.1016/j.addma.2018.06.028Search in Google Scholar