Investigation of porosity behavior in SLS polyamide-12 samples using ex-situ X-ray computed tomography

[1] Ziółkowski G, Chlebus E, Szymczyk P, Kurzac J. Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology. Arch Civ Mech Eng. 2014;14(4). https://doi.org/10.1016/j.acme.2014.02.003. ZiółkowskiG ChlebusE SzymczykP KurzacJ Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology Arch Civ Mech Eng 2014 14 4 https://doi.org/10.1016/j.acme.2014.02.003. 10.1016/j.acme.2014.02.003 Search in Google Scholar

[2] Thompson A, Maskery I, Leach RK. X-ray computed tomography for additive manufacturing: a review. Meas Sci Technol. 2016;27(7). https://doi.org/10.1088/0957-0233/27/7/072001. ThompsonA MaskeryI LeachRK X-ray computed tomography for additive manufacturing: a review Meas Sci Technol 2016 27 7 https://doi.org/10.1088/0957-0233/27/7/072001. 10.1088/0957-0233/27/7/072001 Search in Google Scholar

[3] Gapinski B, Janicki P, Marciniak-Podsadna L, Jakubowicz M. Application of the computed tomography to control parts made on additive manufacturing process. Procedia Eng. 2016;149(June):105–21. https://doi.org/10.1016/j.proeng.2016.06.645. GapinskiB JanickiP Marciniak-PodsadnaL JakubowiczM Application of the computed tomography to control parts made on additive manufacturing process Procedia Eng 2016 149 June 105 21 https://doi.org/10.1016/j.proeng.2016.06.645. 10.1016/j.proeng.2016.06.645 Search in Google Scholar

[4] Chatham CA, Long TE, Williams CB. A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci. 2019;93:68–95. https://doi.org/10.1016/j.progpolymsci.2019.03.003. ChathamCA LongTE WilliamsCB A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing Prog Polym Sci 2019 93 68 95 https://doi.org/10.1016/j.progpolymsci.2019.03.003. 10.1016/j.progpolymsci.2019.03.003 Search in Google Scholar

[5] Stansbury JW, Idacavage MJ. 3D printing with polymers: challenges among expanding options and opportunities. Dent Mater. 2016;32(1): 54–64. https://doi.org/10.1016/j.dental.2015.09.018. StansburyJW IdacavageMJ 3D printing with polymers: challenges among expanding options and opportunities Dent Mater 2016 32 1 54 64 https://doi.org/10.1016/j.dental.2015.09.018. 10.1016/j.dental.2015.09.018 Search in Google Scholar

[6] Yaagoubi H, Abouchadi H, Taha Janan M. Review on the modeling of the laser sintering process for Polyamide 12. E3S Web Conf. 2021;234:1–5. https://doi.org/10.1051/e3sconf/202123400006. YaagoubiH AbouchadiH Taha JananM Review on the modeling of the laser sintering process for Polyamide 12 E3S Web Conf 2021 234 1 5 https://doi.org/10.1051/e3sconf/202123400006. 10.1051/e3sconf/202123400006 Search in Google Scholar

[7] Wohlers Associates. Wohlers Report 2020: 3D printing and additive manufacturing global state of the industry. Wohlers Associates Inc.; 2020. p. 2020. Wohlers Associates Wohlers Report 2020: 3D printing and additive manufacturing global state of the industry Wohlers Associates Inc. 2020 2020 10.31399/asm.hb.v24.a0006555 Search in Google Scholar

[8] Schmid M, Wegener K. Additive manufacturing: polymers applicable for laser sintering (LS). Procedia Eng. 149(June):457–64. https://doi.org/10.1016/j.proeng.2016.06.692. SchmidM WegenerK Additive manufacturing: polymers applicable for laser sintering (LS) Procedia Eng 149 June 457 64 https://doi.org/10.1016/j.proeng.2016.06.692. 10.1016/j.proeng.2016.06.692 Search in Google Scholar

[9] Xu Z, Wang Y, Wu D, Ananth KP, Bai J. The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering. J Manuf Process. 2019;47(July): 419–26. https://doi.org/10.1016/j.jmapro.2019.07.014. XuZ WangY WuD AnanthKP BaiJ The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering J Manuf Process 2019 47 July 419 26 https://doi.org/10.1016/j.jmapro.2019.07.014. 10.1016/j.jmapro.2019.07.014 Search in Google Scholar

[10] Yusheng S, Zhichong L, Haixiao S, Shuhuai H, Fandi Z. Development of a polymer alloy of polystyrene (PS) and polyamide (PA) for building functional part based on selective laser sintering (SLS). Proc Inst Mech Eng Part L J Mater Des Appl. 2004;218(4):299–306. https://doi.org/10.1177/146442070421800404. YushengS ZhichongL HaixiaoS ShuhuaiH FandiZ Development of a polymer alloy of polystyrene (PS) and polyamide (PA) for building functional part based on selective laser sintering (SLS) Proc Inst Mech Eng Part L J Mater Des Appl 2004 218 4 299 306 https://doi.org/10.1177/146442070421800404. 10.1177/146442070421800404 Search in Google Scholar

[11] Olejarczyk M, Gruber P, Ziólkowski G. Capabilities and limitations of using Desktop 3-D printers in the laser sintering process. Appl Sci. 2020;10(18). https://doi.org/10.3390/APP10186184. OlejarczykM GruberP ZiólkowskiG Capabilities and limitations of using Desktop 3-D printers in the laser sintering process Appl Sci 2020 10 18 https://doi.org/10.3390/APP10186184. 10.3390/app10186184 Search in Google Scholar

[12] Mertens JCE, Henderson K, Cordes NL, Pacheco R, Xiao X, Williams JJ, et al. Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography. J Mater Sci. 52(20):12185–206. https://doi.org/10.1007/s10853-017-1339-4. MertensJCE HendersonK CordesNL PachecoR XiaoX WilliamsJJ Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography J Mater Sci 52 20 12185 206 https://doi.org/10.1007/s10853-017-1339-4. 10.1007/s10853-017-1339-4 Search in Google Scholar

[13] Al-Maharma AY, Patil SP, Markert B. Effects of porosity on the mechanical properties of additively manufactured components: a critical review. Mater Res Express. 2020;7(12). https://doi.org/10.1088/2053-1591/abcc5d. Al-MaharmaAY PatilSP MarkertB Effects of porosity on the mechanical properties of additively manufactured components: a critical review Mater Res Express 2020 7 12 https://doi.org/10.1088/2053-1591/abcc5d. 10.1088/2053-1591/abcc5d Search in Google Scholar

[14] Zhu Z, Majewski C. Understanding pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts: a focus on energy input. Mater Des. 2020;194:108937. https://doi.org/10.1016/j.matdes.2020.108937. ZhuZ MajewskiC Understanding pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts: a focus on energy input Mater Des 2020 194 108937. https://doi.org/10.1016/j.matdes.2020.108937. 10.1016/j.matdes.2020.108937 Search in Google Scholar

[15] Ziółkowski G, Treter G, Tokarczyk E, Szymczyk-Ziółkowska P. New possibilities for in situ CT analysis of additive manufactured samples. Tech Trans. 2020;1–9. https://doi.org/10.37705/techtrans/e2020028. ZiółkowskiG TreterG TokarczykE Szymczyk-ZiółkowskaP New possibilities for in situ CT analysis of additive manufactured samples Tech Trans 2020 1 9 https://doi.org/10.37705/techtrans/e2020028. 10.37705/TechTrans/e2020028 Search in Google Scholar

[16] Ziółkowski G, Gruber K, Tokarczyk E, Roszak R, Ziegenhorn M. X-ray computed tomography for the ex-situ mechanical testing and simulation of additively manufactured IN718 samples. Addit Manuf. 2021;45(January). https://doi.org/10.1016/j.addma.2021.102070. ZiółkowskiG GruberK TokarczykE RoszakR ZiegenhornM X-ray computed tomography for the ex-situ mechanical testing and simulation of additively manufactured IN718 samples Addit Manuf 2021 45 January https://doi.org/10.1016/j.addma.2021.102070. 10.1016/j.addma.2021.102070 Search in Google Scholar

[17] Schob D, Sagradov I, Roszak R, Sparr H, Franke R, Ziegenhorn M, et al. Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loading. Eng Fract Mech. 2019;229(November):106841. https://doi.org/10.1016/j.engfracmech.2019.106841. SchobD SagradovI RoszakR SparrH FrankeR ZiegenhornM Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loading Eng Fract Mech 2019 229 November 106841. https://doi.org/10.1016/j.engfracmech.2019.106841. 10.1016/j.engfracmech.2019.106841 Search in Google Scholar

[18] Roszak R, Schob D, Sagradov I, Kotecki K, Sparr H, Maasch Ph, et al. Experimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12. Mech Mater. 2021;159(April): 103893. https://doi.org/10.1016/j.mechmat.2021.103893. RoszakR SchobD SagradovI KoteckiK SparrH MaaschPh Experimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12 Mech Mater 2021 159 April 103893. https://doi.org/10.1016/j.mechmat.2021.103893. 10.1016/j.mechmat.2021.103893 Search in Google Scholar

[19] Kok Y, Tan XP, Wang P, Nai MLS, Loh NH, Liu E, et al. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des. 2018;139:565–86. https://doi.org/10.1016/j.matdes.2017.11.021. KokY TanXP WangP NaiMLS LohNH LiuE Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review Mater Des 2018 139 565 86 https://doi.org/10.1016/j.matdes.2017.11.021. 10.1016/j.matdes.2017.11.021 Search in Google Scholar

[20] Hou G, Zhu H, Xie D. The influence of SLS process parameters on the tensile strength of PA2200 powder. IOP Conf Ser Earth Environ Sci. 2020;571(1). https://doi.org/10.1088/1755-1315/571/1/012111. HouG ZhuH XieD The influence of SLS process parameters on the tensile strength of PA2200 powder IOP Conf Ser Earth Environ Sci 2020 571 1 https://doi.org/10.1088/1755-1315/571/1/012111. 10.1088/1755-1315/571/1/012111 Search in Google Scholar

[21] Craft G, Nussbaum J, Crane N, Harmon JP. Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes. Addit Manuf. 2018;22(June):800–6. https://doi.org/10.1016/j.addma.2018.06.028. CraftG NussbaumJ CraneN HarmonJP Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes Addit Manuf 2018 22 June 800 6 https://doi.org/10.1016/j.addma.2018.06.028. 10.1016/j.addma.2018.06.028 Search in Google Scholar