<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The main objective of this article is to analyse the structural design of tire lifting equipment for tire services. To gain a better insight into the problem, several steps must be taken. The first step is to conduct a market analysis, which involves identifying all available equipment. Several types of lifting devices were distinguished within the development process, which differ from each other in terms of design and power supply. The type of structure and power unit represent the second steps in the design process. This is a critical aspect of the design since the forces necessary to move the system change as a result of these attributes. The design itself is the last step in the device’s design. Passenger cars differ from each other by their weight, which is limited to 3.5 tons. Based on the weight, basic strength calculation and dimensioning of the lifting device are carried out. Based on the calculations, the scissor lift device is selected. The lower frame, scissor legs, ramp, mechanical lock, and scissors drive mechanism are five main components of the device. This type of structure is best used with a hydraulic drive unit, which is calculated in the article.</p>
</abstract>

The main objective of this article is to analyse the structural design of tire lifting equipment for tire services. To gain a better insight into the problem, several steps must be taken. The first step is to conduct a market analysis, which involves identifying all available equipment. Several types of lifting devices were distinguished within the development process, which differ from each other in terms of design and power supply. The type of structure and power unit represent the second steps in the design process. This is a critical aspect of the design since the forces necessary to move the system change as a result of these attributes. The design itself is the last step in the device’s design. Passenger cars differ from each other by their weight, which is limited to 3.5 tons. Based on the weight, basic strength calculation and dimensioning of the lifting device are carried out. Based on the calculations, the scissor lift device is selected. The lower frame, scissor legs, ramp, mechanical lock, and scissors drive mechanism are five main components of the device. This type of structure is best used with a hydraulic drive unit, which is calculated in the article.

Design of Vehicle Lifting Equipment Using Progressive Methods

Department of Design and Mechanical Elements

LOGI – Scientific Journal on Transport and Logistics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Design of Vehicle Lifting Equipment Using Progressive Methods"}

The main objective of this article is to analyse the structural design of tire lifting equipment for tire services. To gain a better insight into the problem,...

Design of Vehicle Lifting Equipment Using Progressive Methods

Pubblicato online: 04 dic 2021

Pagine: 238 - 248

Ricevuto: 10 giu 2021

Accettato: 03 nov 2021

DOI: https://doi.org/10.2478/logi-2021-0022

Parole chiave
Structural design, lifting equipment, passenger car

© 2021 Matúš Čuchor et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Design of Vehicle Lifting Equipment Using Progressive Methods

Pubblicato online: 04 dic 2021

Pagine: 238 - 248

Ricevuto: 10 giu 2021

Accettato: 03 nov 2021

DOI: https://doi.org/10.2478/logi-2021-0022

Parole chiaveStructural design, lifting equipment, passenger car

© 2021 Matúš Čuchor et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
Structural design, lifting equipment, passenger car