At present, the economic benefits of double inlet and double outlet ball mills, which are commonly used in coal-fired power plants, need to be improved. Based on this, this paper explores the factors influencing the output of double inlet and double outlet ball mill by establishing the output system of double inlet and double outlet ball mill. By analyzing the influence factors of the output of double inlet and double outlet ball mill, and combining with system dynamics, the dynamic model of double inlet and double outlet ball mill output system is established, and SPSS is used to fit the model data with the real data. The fitting degree is above 0.8, and the authenticity is high. The simulation results show that the impact energy of barrel grinding, the grinding powder fineness, and the pressure ratio in the ball mill affect the output of double inlet and double outlet ball mill according to certain relations. Finally, the research in this paper provides theoretical and technical support for improving the economic benefits of double inlet and double outlet ball mills.
Keywords
- Ball Mill Output
- Double in and double out
- system dynamics
- spss
At present, the main power generation mode in China is thermal power generation. The grinding and pulverizing device of thermal power generation is mainly a double-in and double-out ball grinder, and the output of double-in and double-out ball grinder is an important indicator to measure the performance of double-in and double-out ball grinder. Due to the disadvantages of large time delay, time-varying characteristics, multivariable and strong coupling, high power consumption, and serious noise and dust pollution, the double-in and double-out ball mill in China has reduced the economy of the unit, thus unable to meet the requirements of the contemporary era [1]. Therefore, it is of great theoretical significance and practical value to study the factors affecting the output of the double-in and double-out ball grinder for improving the economic performance of the unit.
In 2016, Gao Xuewei and Fu Zhongguang proposed a modeling method of double inlet and double outlet ball mill based on big data analysis [2]. By extracting the required information from the actual data, the K-means clustering algorithm and principal component analysis method were used to analyze the data, and a distributed support vector was adopted to establish the model. T. Tanno et al. applied a reflective terahertz spectrum respectively in coal moisture measurement [3]. Wen Jun Wan et al. studied the dynamic balance of the coal level of the coal mill by analyzing the pulverizing mechanism of the coal mill, and established the mathematical model of the filling level of the coal mill by using the mathematical equation [4]. Wan Wenjun, Liu Hao, Huang Weijian, and Chen Shihe established the dynamic characteristic mathematical model of process parameters by analyzing the process parameters such as material level, outlet temperature, and coal quantity of double inlet and outlet coal mills [5].
(1) The output of double inlet and double outlet ball mill is an important index to evaluate the performance of double inlet and double outlet ball mill. However, the existing research on the output of double inlet and double outlet ball mill mainly obtains the main performance parameters through the analysis of experimental results and establishes the mathematical expression based on this, which often has certain limitations.
(2)Although many countries, including China, have recognized that many factors are affecting the output of double-in and double-out ball mills. But what are the key factors to improve the output of the double-in and double-out ball mill and what dynamic relationship do they show during the output process of the double-in and double-out ball mill? What are their roles? The exact answer is not yet given. However, the solution to these problems is of great practical significance to improve the output of double-in and double-out ball grinder.
Therefore, this paper firstly establishes the conceptual frame about the output of double-in and double-out ball grinder, researches the influencing factors of double-in and double-out ball grinder employing system dynamics, and provides strong theoretical support for improving the output of double-in and double-out ball grinder.
In this paper, by using the research method of system dynamics, the complex network of various factors that affect the output of double inlet and double outlet ball mill is established by establishing multiple causal feedback loops, and the influence factors affecting the output of double inlet and double outlet ball mill are found out by constructing system dynamics flow diagram, to improve the economic benefits of double inlet and double outlet ball mill.
One of the important links in establishing a system dynamic model is to draw the cause and effect diagram of the output of double-in and double-out ball grinder. In this paper, the components of the output system of double-in and double-out ball grinder are divided into four modules: impact energy of grinding in barrel, grinding fineness after grinding, pressure ratio and output of grinding in barrel: impact energy module of grinding in barrel includes lifting height of steel ball in raw coal cylinder, barrel diameter, quality of steel ball, a rotational speed of the cylinder, filling rate and breakage degree of steel ball; grinding fineness after grinding the module includes raw coal quality, water content and coal residence time in the drum; pressure ratio module in ball mill includes ventilation and air leakage; output module includes the output of double-in and double-out ball mill.
Based on the conceptual model, the interaction of the influencing factors is analyzed, and two groups of basic assumptions (Fig. 1) between the output of double inlet and double outlet ball mills are put forward. The first group is about the interaction between the modules, that is, the interaction between the impact energy of the barrel grinding, the grinding powder fineness, the pressure ratio in the ball mill, and the ball mill output The second group is the hypothesis of interaction among the influencing factors, that is, the impact energy of grinding in barrel, the fineness of grinding powder after grinding, and the pressure ratio in the ball mill.
Fig. 1
Two sets of basic assumptions between the output of a double-in and double-out ball grinder

Based on the above assumptions, a general cause and effect diagram of the output system of double-in and double-out ball mill is established [6,7,8,9,10], As shown in Figure 2
Fig. 2
General Cause and Effect Diagram of Output System of Double-in and Double-out Ball Mill

System dynamics modeling needs to clarify the purpose of modeling, different purposes even if the same system, the model may be different. The purpose of this paper is to study the factors affecting the output of double inlet and double outlet ball mill.
Based on the general causality diagram of the double inlet and double outlet ball mill output system shown in Figure 2, the data are statistically analyzed, and the factors that have little influence on the output of double inlet and double outlet ball mill are removed from the general causality diagram, and the system dynamic flow diagram of double inlet and double outlet ball mill output is established (Fig. 3).
Fig. 3
System dynamic flow diagram of the output of double-in and double-out ball mill

Fit test: Fit test between the actual value and simulated value by calculating the correlation coefficient with spss [11] software. After checking, the fitting degree of actual value and simulation value of coal reserves, ventilation volume, and material level differences are above 0.8, which is better.
In this paper, by adding functions [6], [9] to the system, the influence of some factors on the output of double inlet and double outlet ball mill is analyzed by changing some variables in the model.
Taking 168 hours as an example, the variation of ball grinder output as shown in Fig. 4 is obtained by adjusting the factors in three modules: impact energy of grinding in the drum, grinding fineness after grinding, and pressure ratio in ball grinder.
Fig. 4
Ball grinder output kg/hour

The changes of grinding fineness, impact energy of grinding in the drum, and pressure ratio in ball grinder are as follows:
It can be seen from Figure 4 that the output of the ball grinder first increases and then decreases, and the maximum value appears in about 80 hours. The fineness of the pulverized coal ground in Figure 5 increases with time, the impact energy in the barrel in Figure 6 increases with time, and the pressure ratio in the pulverizer in Figure 7 decrease with time. In conclusion, before the maximum output of the ball grinder is reached, the fineness of coal ground and the impact energy of grinding in the barrel are the main factors affecting the output of the ball grinder. When the output of the ball grinder reaches the maximum value, the pressure ratio in the coal grinder replaces the fineness of coal ground, and the impact energy of grinding in barrel becomes the main factor affecting the output of the ball grinder.
Fig. 5
Coal fineness ground %

Fig. 6
Grinding impact energy in barrel J

Fig. 7
Pressure ratio in coal mill 1

In this paper, a process-oriented conceptual framework of the output of double-in and double-out ball mill is constructed, and a system dynamic model is constructed. By adding a function to the system dynamic model, the following conclusions are obtained:
The impact energy of grinding in the barrel, grinding fineness after grinding and pressure ratio in the ball grinder are the main factors affecting the output of the ball grinder. When the output of the ball grinder does not reach the maximum, the impact energy of grinding in the barrel and the grinding fineness after grinding have a greater influence on the output of the ball grinder. When the output of the ball grinder reaches the maximum, the pressure ratio in the ball grinder has a greater influence than the impact energy of grinding in the barrel and the grinding fineness after grinding. If the output of the ball mill does not reach the expected value, the pressure ratio in the ball mill and the change of the ball mill output are used to judge whether the maximum output of the ball mill is exceeded. If there is a positive correlation between the pressure in the ball mill and the output of the ball mill, it exceeds the maximum output of the ball mill. It is necessary to increase the output of the ball mill by increasing the pressure ratio in the ball mill, such as changing the opening of the inlet baffle of the discharge mill. If there is a negative correlation between the pressure in the ball mill and the output of the ball mill, the maximum output of the ball mill is not exceeded. The output level of the ball mill can be improved by increasing the impact energy of grinding in the barrel and the fineness of the grinding powder. If we want to improve the impact energy of grinding in the cylinder, we can improve the filling rate of the steel ball and reduce the friction between the steel ball and cylinder; if we want to improve the fineness of grinding powder, we can use raw coal with better quality and more suitable moisture.
Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Law of interest rate changes in financial markets based on the differential equation model of liquidity Basalt fibre continuous reinforcement composite pavement reinforcement design based on finite element model Industrial transfer and regional economy coordination based on multiple regression model Response model for the psychological education of college students based on non-linear finite element equations Satisfactory consistency judgement and inconsistency adjustment of linguistic judgement matrix Analysis of the relationship between industrial agglomeration and regional economic growth based on the multi-objective optimisation model Constraint effect of enterprise productivity based on constrained form variational computing The impact of urban expansion in Beijing and Metropolitan Area urban heat Island from 1999 to 2019 Ultrasonic wave promoting ice melt in ice storage tank based on polynomial fitting calculation model Regarding new wave distributions of the non-linear integro-partial Ito differential and fifth-order integrable equations Badminton players’ trajectory under numerical calculation method Innovations to Attribute Reduction of Covering Decision System Based on Conditional Information Entropy Nonlinear Differential Equations in the Teaching Model of Educational Informatisation The evaluation of college students’ innovation and entrepreneurship ability based on nonlinear model Smart Communities to Reduce Earthquake Damage: A Case Study in Xinheyuan, China Institutional investor company social responsibility report and company performance Mathematical analysis of China's birth rate and research on the urgency of deepening the reform of art education First-principles calculations of magnetic and mechanical properties of Fe-based nanocrystalline alloy Fe80Si10Nb6B2Cu2 Has the belt and road initiative boosted the resident consumption in cities along the domestic route? – evidence from credit card consumption Attitude control for the rigid spacecraft with the improved extended state observer Cognitive Computational Model Using Machine Learning Algorithm in Artificial Intelligence Environment Research on tourism income index based on ordinary differential mathematical equation Application of Higher-Order Ordinary Differential Equation Model in Financial Investment Stock Price Forecast Sports Science Teaching of Athletics Based on Nonlinear Mathematical Equation Informatisation of educational reform based on fractional differential equations Research on the control of quantitative economic management variables under the numerical method based on stochastic ordinary differential equations Network monitoring and processing accuracy of big data acquisition based on mathematical model of fractional differential equation System dynamics model of output of ball mill Sensitivity Analysis of the Waterproof Performance of Elastic Rubber Gasket in Shield Tunnel Design of Morlet wavelet neural network to solve the non-linear influenza disease system Motion about equilibrium points in the Jupiter-Europa system with oblateness Badminton players’ trajectory under numerical calculation method Optimal preview repetitive control for impulse-free continuous-time descriptor systems Development of main functional modules for MVB and its application in rail transit Study on the impact of forest fire prevention policy on the health of forest resources Value Creation of Real Estate Company Spin-off Property Service Company Listing Selection by differential mortality rates Digital model creation and image meticulous processing based on variational partial differential equation The modelling and implementation of the virtual 3D animation scene based on the geometric centre-of-mass algorithm The policy efficiency evaluation of the Beijing–Tianjin–Hebei regional government guidance fund based on the entropy method The transfer of stylised artistic images in eye movement experiments based on fuzzy differential equations Research on behavioural differences in the processing of tenant listing information: An eye-movement experiment A review of the treatment techniques of VOC Some classes of complete permutation polynomials in the form of ( x p m −x +δ )s +ax p m +bx overF p 2m Deformation and stress theory of surrounding rock of shallow circular tunnel based on complex variable function method The consistency method of linguistic information and other four preference information in group decision-making Research on the willingness of Forest Land’s Management Rights transfer under the Beijing Forestry Development A mathematical model of the fractional differential method for structural design dynamics simulation of lower limb force movement step structure based on Sanda movement Fractal structure of magnetic island in tokamak plasma Numerical calculation and study of differential equations of muscle movement velocity based on martial articulation body ligament tension Study on the maximum value of flight distance based on the fractional differential equation for calculating the best path of shot put Sports intensity and energy consumption based on fractional linear regression equation Translog function in government development of low-carbon economy Analysis of the properties of matrix rank and the relationship between matrix rank and matrix operations Research on the Psychological Distribution Delay of Artificial Neural Network Based on the Analysis of Differential Equation by Inequality Expansion and Contraction Method Study on Establishment and Improvement Strategy of Aviation Equipment Research on Financial Risk Early Warning of Listed Companies Based on Stochastic Effect Mode Constructing Artistic Surface Modeling Design Based on Nonlinear Over-limit Interpolation Equation Numerical Simulation Analysis Mathematics of Fluid Mechanics for Semiconductor Circuit Breaker Characteristics of Mathematical Statistics Model of Student Emotion in College Physical Education Human Body Movement Coupling Model in Physical Education Class in the Educational Mathematical Equation of Reasonable Exercise Course The contribution of structural equation model analysis to higher education agglomeration and innovation and entrepreneurship Study on the evolutionary game theory of the psychological choice for online purchase of fresh produce under replicator dynamics formula The influence of X fuzzy mathematics method in basketball tactics scoring Mathematical statistics algorithm in the bending performance test of corroded reinforced concrete beams under fatigue load Nonlinear strategic human resource management based on organisational mathematical model Back propagation mathematical model for stock price prediction Evolutionary game research on the psychological choice of online shopping of fresh agricultural products based on dynamic simulation model Differential equation model of financial market stability based on big data Multi-attribute decision-making methods based on normal random variables in supply chain risk management Linear fractional differential equations in bank resource allocation and financial risk management model Construction and reform of art design teaching mode under the background of the integration of non-linear equations and the internet Spatial–temporal graph neural network based on node attention A contrastive study on the production of double vowels in Mandarin Financial accounting measurement model based on numerical analysis of rigid normal differential equation and rigid generalised functional equation Research of cascade averaging control in hydraulic equilibrium regulation of heating pipe network Mathematical analysis of civil litigation and empirical research of corporate governance Health monitoring of Bridges based on multifractal theory College students’ innovation and entrepreneurship ability based on nonlinear model Health status diagnosis of the bridges based on multi-fractal de-trend fluctuation analysis Mathematical simulation analysis of optimal testing of shot puter's throwing path Performance evaluation of college laboratories based on fusion of decision tree and BP neural network Application and risk assessment of the energy performance contracting model in energy conservation of public buildings The term structure of economic management rate under the parameter analysis of the estimation model based on common differential equation Sensitivity analysis of design parameters of envelope enclosure performance in the dry-hot and dry-cold areas The Spatial Form of Digital Nonlinear Landscape Architecture Design Based on Computer Big Data The improvement of museum information flow based on paste functional mapping method The art design of industrialised manufacturing furniture products based on the simulation of mathematical curves TOPSIS missile target selection method supported by the posterior probability of target recognition The incentive contract of subject librarians in university library under the non-linear task importance Modelling and Simulation of Collaborative Innovation System in Colleges and Universities Based on Interpreted Structural Equation Model Small amplitude periodic solution of Hopf Bifurcation Theorem for fractional differential equations of balance point in group competitive martial arts The Optimal Solution of Feature Decomposition Based on the Mathematical Model of Nonlinear Landscape Garden Features Composite mechanical performance of prefabricated concrete based on hysteresis curve equation Higher education innovation and reform model based on hierarchical probit Application of Fuzzy Mathematics Calculation in Quantitative Evaluation of Students’ Performance of Basketball Jump Shot The teaching of sports science of track and field-based on nonlinear mathematical equations Visual error correction of continuous aerobics action images based on graph difference function Ecological balance model of effective utilization of agricultural water resources based on fractional differential equations Application of Higher Order Ordinary Differential Equation Model in Financial Investment Stock Price Forecast Precision algorithms in second-order fractional differential equations Application of Forced Modulation Function Mathematical Model in the Characteristic Research of Reflective Intensity Fibre Sensors Fractional differential equations in National Sports Training in Colleges and Universities Radioactive source search problem and optimisation model based on meta-heuristic algorithm Application of mathematical probabilistic statistical model of base – FFCA financial data processing Research on a method of completeness index based on complex model Distribution network monitoring and management system based on intelligent recognition and judgement Fake online review recognition algorithm and optimisation research based on deep learning Research on the sustainable development and renewal of Macao inner harbour under the background of digitisation Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation Study on the crushing mechanism and parameters of the two-flow crusher Topological optimisation technology of gravity dam section structure based on ANSYS partial differential equation operation Interaction design of financial insurance products under the Era of AIoT Modeling the pathway of breast cancer in the Middle East Corporate social responsibility fulfilment, product-market competition and debt risk: Evidence from China ARMA analysis of the green innovation technology of core enterprises under the ecosystem – Time series data Reconstruction of multimodal aesthetic critical discourse analysis framework Image design and interaction technology based on Fourier inverse transform What does students’ experience of e-portfolios suggest Research on China interregional industrial transformation slowdown and influencing factors of industrial transformation based on numerical simulation The medical health venture capital network community structure, information dissemination and the cognitive proximity The optimal model of employment and entrepreneurship models in colleges and universities based on probability theory and statistics A generative design method of building layout generated by path Analysis of the causes of the influence of the industrial economy on the social economy based on multiple linear regression equation Research of neural network for weld penetration control Engineering project management based on multiple regression equation and building information modelling technology Research on predictive control of students’ performance in PE classes based on the mathematical model of multiple linear regression equation Beam control method for multi-array antennas based on improved genetic algorithm The influence of X fuzzy mathematical method on basketball tactics scoring Mathematical model of back propagation for stock price forecasting Application of regression function model based on panel data in bank resource allocation financial risk management Application of Logical Regression Function Model in Credit Business of Commercial Banks Research on aerobics training posture motion capture based on mathematical similarity matching statistical analysis Application of Sobolev-Volterra projection and finite element numerical analysis of integral differential equations in modern art design Research on motion capture of dance training pose based on statistical analysis of mathematical similarity matching Application of data mining in basketball statistics Application of B-theory for numerical method of functional differential equations in the analysis of fair value in financial accounting Research on the influence of fuzzy mathematics simulation model in the development of Wushu market Study on audio-visual family restoration of children with mental disorders based on the mathematical model of fuzzy comprehensive evaluation of differential equation Difference-in-differences test for micro effect of technological finance cooperation pilot in China Application of multi-attribute decision-making methods based on normal random variables in supply chain risk management Exploration on the collaborative relationship between government, industry, and university from the perspective of collaborative innovation The impact of financial repression on manufacturing upgrade based on fractional Fourier transform and probability AtanK-A New SVM Kernel for Classification Validity and reliability analysis of the Chinese version of planned happenstance career inventory based on mathematical statistics Visual positioning system for marine industrial robot assembly based on complex variable function Mechanical behaviour of continuous girder bridge with corrugated steel webs constructed by RW Application of Lane-Emden differential equation numerical method in fair value analysis of financial accounting Regression function model in risk management of bank resource allocation Application of numerical method of functional differential equations in fair value of financial accounting Optimal solution of fractional differential equations in solving the relief of college students’ mental obstacles Risk contagion in financial markets based on copula model Calculating university education model based on finite element fractional differential equations and macro-control analysis Educational research on mathematics differential equation to simulate the model of children's mental health prevention and control system Analysis of enterprise management technology and innovation based on multilinear regression model Verifying the validity of the whole person model of mental health education activities in colleges based on differential equation RETRACTION NOTE Calculation of tourism development income index based on finite element ordinary differential mathematical equation Adoption of deep learning Markov model combined with copula function in portfolio risk measurement Radar system simulation and non-Gaussian mathematical model under virtual reality technology Comparison of compression estimations under the penalty functions of different violent crimes on campus through deep learning and linear spatial autoregressive models Research and application of constructing football training linear programming based on multiple linear regression equation Research on management evaluation of enterprise sales cash flow percentage method based on the application of quadratic linear regression equations Mathematical simulation analysis of optimal detection of shot-putters’ best path Determination of the minimum distance between vibration source and fibre under existing optical vibration signals: a study Mathematical modelling of enterprise financial risk assessment based on risk conduction model Nonlinear differential equations based on the B-S-M model in the pricing of derivatives in financial markets Mathematical simulation experiment based on optimisation of heat treatment process of aluminium alloy materials Mathematical model of transforming image elements to structured data based on BP neural network Educational reform informatisation based on fractional differential equation MCM of Student’s Physical Health Based on Mathematical Cone Sports health quantification method and system implementation based on multiple thermal physiology simulation Research on visual optimization design of machine–machine interface for mechanical industrial equipment based on nonlinear partial equations Informationisation of teaching model for track and field education based on finite element higher-order fractional differential equation Research on identifying psychological health problems of college students by logistic regression model based on data mining Information technology of preschool education reform of fine arts based on fractional differential equation Information Teaching Model of Preschool Art Education in Colleges and Universities Based on Finite Element Higher-Order Fractional Differential Equation A mathematical model of PCNN for image fusion with non-sampled contourlet transform Application of artificial intelligence algorithm in mathematical modelling and solving College Students’ Mental Health Climbing Consumption Model Based on Nonlinear Differential Equations Differential equation to verify the validity of the model of the whole-person mental health education activity in Universities Optimisation of Modelling of Finite Element Differential Equations with Modern Art Design Theory Analysis and Prediction of College Students’ Mental Health Based on K-means Clustering Algorithm Mathematical function data model analysis and synthesis system based on short-term human movement Human gait modelling and tracking based on motion functionalisation Analysis and synthesis of function data of human movement Energy-saving technology of BIM green buildings using fractional differential equation Study on the training model of football movement trajectory drop point based on fractional differential equation Financial Accounting Measurement Model Based on Numerical Analysis of Rigid Normal Differential Equation and Rigid Functional Equation User online consumption behaviour based on fractional differential equation Differential equation model of financial market stability based on Internet big data Multi-attribute Decision Method Based on Normal Random Variable in Economic Management Risk Control Children’s cognitive function and mental health based on finite element nonlinear mathematical model Dichotomy model based on the finite element differential equation in the educational informatisation teaching reform model Nonlinear Dissipative System Mathematical Equations in the Multi-regression Model of Information-based Teaching Stock price analysis based on the research of multiple linear regression macroeconomic variables Fractional Linear Regression Equation in Agricultural Disaster Assessment Model Based on Geographic Information System Analysis Technology