This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Korkmaz ME, Gupta MK, Robak G, Moj K, Krolczyk GM, Kuntoğlu M. Development of lattice structure with selective laser melting process: A state of the art on properties, future trends and challenges. J Manuf Process. 2022 Sep 1;81:1040–63.Search in Google Scholar
Tian L, Lu L, Chen W, Xia Y, Wang CCL, Wang W. Organic Open-cell Porous Structure Modeling. In: Symposium on Computational Fabrication [Internet]. New York, NY, USA: ACM; 2020. p. 1–12. Available from: https://dl.acm.org/doi/10.1145/3424630.3425414Search in Google Scholar
Mora S, Pugno NM, Misseroni D. 3D printed architected lattice structures by material jetting. Mater Today [Internet]. 2022;59: 107–32. Available from: https://doi.org/10.1016/j.mattod.2022.05.008Search in Google Scholar
Thirunavukkarasu N, Gao J, Peng S, Laroui A, Wu L, Weng Z. Mechanically robust 3D printed elastomeric lattices inspired by strong and tough hierarchical structures. Addit Manuf [Internet]. 2023;66(November 2022):103451. Available from: https://doi.org/10.1016/j.addma.2023.103451Search in Google Scholar
Kurzydłowski KJ, Ralph B. The quantitative description of the microstructure of materials. CRC Press; 1995. 418 p.Search in Google Scholar
Bernacka M, Aladag M, Dubicki A, Zgłobicka I. Effect of Pore Architecture of 3d Printed Open Porosity Cellular Structures on their Resistance to Mechanical Loading: Part I – Experimental Studies. Acta Mech Autom. 2024;18(3):419–26.Search in Google Scholar
Montazerian H, Davoodi E, Asadi-Eydivand M, Kadkhodapour J, Solati-Hashjin M. Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties. Mater Des [Internet]. 2017 Jul;126(April):98–114. Available from: http://dx.doi.org/10.1016/j.matdes.2017.04.009Search in Google Scholar
Li S, Yuan S, Zhu J, Zhang W, Tang Y, Wang C, et al. Optimal and adaptive lattice design considering process-induced material anisotropy and geometric inaccuracy for additive manufacturing. Struct Multidiscip Optim. 2022 Jan 1;65(1):1–16.Search in Google Scholar
Barbaros I, Yang Y, Safaei B, Yang Z, Qin Z, Asmael M. State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials. Nanotechnol Rev [Internet]. 2022 Jan 1 [cited 2022 Oct 22];11(1):321–71. Available from: https://www.degruyter.com/document/doi/10.1515/ntrev-2022-0017/htmlSearch in Google Scholar
Liu R, Ma L, Liu H, Xu B, Feng C, He R. Effects of pore size on the mechanical and biological properties of stereolithographic 3D printed HAp bioceramic scaffold. Ceram Int. 2021 Oct 15;47(20):28924–31.Search in Google Scholar
Jiao C, Xie D, He Z, Liang H, Shen L, Yang Y, et al. Additive manufacturing of Bio-inspired ceramic bone Scaffolds: Structural Design, mechanical properties and biocompatibility. Mater Des. 2022 May 1;217.Search in Google Scholar
Cerardi A, Caneri M, Meneghello R, Concheri G, Ricotta M. Mechanical characterization of polyamide cellular structures fabricated using selective laser sintering technologies. Mater Des. 2013 Apr 1;46:910–5.Search in Google Scholar
Cipriani CE, Ha T, Martinez Defilló OB, Myneni M, Wang Y, Benjamin CC, et al. Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials. ACS Mater Au [Internet]. 2021 Sep 8 [cited 2022 Oct 22];1(1):69–80. Available from: https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017Search in Google Scholar
Zeleniakienė D, Kleveckas T, Liukaitis J, G. M. The Influence of Porosity on Stress and Strain State of Porous Polymer Materials. Mater Sci. 2003;9(4):358–62.Search in Google Scholar
Chen X, Ji Q, Wei J, Tan H, Yu J, Zhang P, et al. Light-weight shell-lattice metamaterials for mechanical shock absorption. Int J Mech Sci [Internet]. 2020;169(August 2019):105288. Available from: https://doi.org/10.1016/j.ijmecsci.2019.105288Search in Google Scholar
White DA, Kudo J, Swartz K, Tortorelli DA, Watts S. A reduced order model approach for finite element analysis of cellular structures. Finite Elem Anal Des [Internet]. 2023 Feb [cited 2022 Oct 26];214:103855. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0168874X22001287Search in Google Scholar
Ni Y, Liao H, Zhao Q, Wu W, Shi Y, Wu S. Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling. Eng Fract Mech. 2022 Mar 15;263:108323.Search in Google Scholar
Ruiz de Galarreta S, Jeffers JRT, Ghouse S. A validated finite element analysis procedure for porous structures. Mater Des. 2020 Apr 1;189.Search in Google Scholar
Abueidda DW, Elhebeary M, Shiang CS (Andrew), Pang S, Abu Al-Rub RK, Jasiuk IM. Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study. Mater Des. 2019 Mar 5;165:107597.Search in Google Scholar
Smith M, Guan Z, Cantwell WJ. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique. Int J Mech Sci. 2013 Feb 1;67: 28–41.Search in Google Scholar
Zhong L, Li X. Simulation analysis of lightweight cylindrical lattice materials with different unit cells. J Coast Res. 2015 Mar; (73 (10073)):155–9.Search in Google Scholar
Sadeghzade M, Gharehbaghi H, Farrokhabadi A. Experimental and analytical studies of mechanical properties of additively manufactured lattice structure based on octagonal bipyramid cubic unit cell. Addit Manuf. 2021 Dec 1;48:102403.Search in Google Scholar
Chen W, Zheng X, Liu S. Finite-Element-Mesh Based Method for Modeling and Optimization of Lattice Structures for Additive Manufacturing. Mater 2018:23;11(11):2073.Search in Google Scholar
Song J, Wang Y, Zhou W, Fan R, Yu B, Lu Y, et al. Topology optimization-guided lattice composites and their mechanical characterizations. Compos Part B Eng. 2019 Mar 1;160:402–11.Search in Google Scholar
Leon-Patiño CA, Drew RAL. Role of metal interlayers in the infiltration of metal-ceramic composites. Curr Opin Solid State Mater Sci. 2005 Aug;9(4–5):211–8.Search in Google Scholar
Lim YE, Park JH, Park K. Automatic Design of 3D Conformal Lightweight Structures Based on a Tetrahedral Mesh. Int J Precis Eng Manuf Technol 2018 54 [Internet]. 2018 Aug 23 [cited 2022 Oct 26];5(4):499–506. Available from: https://link.springer.com/article/10.1007/s40684-018-0053-2Search in Google Scholar
Salonitis K, Chantzis D, Kappatos V. A hybrid finite element analysis and evolutionary computation method for the design of lightweight lattice components with optimized strut diameter. Int J Adv Manuf Technol 2016 909 [Internet]. 2016 Oct 21 [cited 2022 Oct 26]; 90(9):2689–701. Available from: https://link.springer.com/article/10.1007/s00170-016-9528-xSearch in Google Scholar
Yang L, Yan C, Cao W, Liu Z, Song B, Wen S, et al. Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting. Acta Mater. 2019 Dec 1;181:49–66.Search in Google Scholar
Shin J, Kim S, Jeong D, Lee HG, Lee D, Lim JY, et al. Finite Element Analysis of Schwarz P Surface Pore Geometries for Tissue-Engineered Scaffolds. Math Probl Eng [Internet]. 2012;2012:1–13. Available from: http://www.hindawi.com/journals/mpe/2012/694194/Search in Google Scholar
Gonzalez FJQ, Nuno N. Finite element modeling of manufacturing irregularities of porous materials. Biomater Biomech Bioeng [Internet]. 2016 Mar 25;3(1):1–14. Available from: http://koreascience.or.kr/journal/view.jsp?kj=E1TPEG&py=2016&vnc=v3n1&sp=1Search in Google Scholar
Deliormanlı AM, Deliormanlı AH. Finite element method simulation for the prediction of mechanical properties of three-dimensional periodic bioactive glass scaffolds. J Aust Ceram Soc [Internet]. 2017 Oct 13;53(2):299–307. Available from: http://link.springer.com/10.1007/s41779-017-0037-7Search in Google Scholar
Khrapov D, Koptyug A, Manabaev K, Léonard F, Mishurova T, Bruno G, et al. The impact of post manufacturing treatment of functionally graded Ti6Al4V scaffolds on their surface morphology and mechanical strength. J Mater Res Technol. 2020;9(2):1866–81.Search in Google Scholar
Gardan J. Additive manufacturing technologies : State of the art and trends [Internet]. Additive Manufacturing Handbook. CRC Press; 2017 [cited 2022 Oct 26]. Available from: https://www.taylorfrancis.com/chapters/edit/10.1201/9781315119106-10/additive-manufacturing-technologies-julien-gardanSearch in Google Scholar
Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos Part B Eng. 2018 Jun 15;143:172–96.Search in Google Scholar
PA 12 - PA2200: Nylon for Industrial 3D Printing | EOS GmbH [Internet]. [cited 2022 Oct 10]. Available from: https://www.eos.info/en/additive-manufacturing/3d-printing-plastic/sls-polymer-materials/polyamide-pa-12-alumideSearch in Google Scholar
Bernacka ME. Bio-inspired design and experimental verification properties of porous elements obtained by 3D printing. [Bialystok]: Bialystok University of Technology; 2021.Search in Google Scholar
Teng F, Sun Y, Guo S, Gao B, Yu G. Topological and Mechanical Properties of Different Lattice Structures Based on Additive Manufacturing. Micromachines. 2022;13(7).Search in Google Scholar