<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper is focusses on developing a novel method for vibration damage estimation for military helicopters, fighter aircrafts and any other aircraft exposed to combined stochastic and deterministic loading. The first stage of the research focused on frequency domain damage prediction, which is the legacy method proposed by Bishop and developed by Sweitzer, Schlesinger, Woodward, Kerr, Murthy, Datta and, Atkins. The mentioned frequency domain-based method is used in commercial software, e.g., MSC CAE Fatigue. Frequency domain damage prediction is based on superposition of spectral moments and Dirlik method of Rainflow Cycle Counting algorithm in frequency domain. The first phase of the research showed the legacy algorithm based on transfer function developed using FEM (Finite Element Method) method in Abaqus environment and is very conservative. The second stage of the research aims to develop a novel method which allowing for more robust and accurate damage estimation. For this purpose, the Monte Carlo method for retrieving random signal in the time domain from signal in frequency domain was used. To obtain the system transfer function, – the 1 g load harmonic system response was obtained using FEM analysis. It was subsequently scaled linearly by the PSD input curve for random loading and sine wave, or sine sweep function for deterministic loading to calculate the cumulative system response of the linear system. The research allows the development of a novel method to precisely estimate vibration damage using combined time and frequency domains approach, based on effective frequency domain FEM analysis of the linear system. The new proposed method can be also used for precise replication of test conditions via considering signal clipping and frequency resolution used for real testing.</p>
</abstract>

This paper is focusses on developing a novel method for vibration damage estimation for military helicopters, fighter aircrafts and any other aircraft exposed to combined stochastic and deterministic loading. The first stage of the research focused on frequency domain damage prediction, which is the legacy method proposed by Bishop and developed by Sweitzer, Schlesinger, Woodward, Kerr, Murthy, Datta and, Atkins. The mentioned frequency domain-based method is used in commercial software, e.g., MSC CAE Fatigue. Frequency domain damage prediction is based on superposition of spectral moments and Dirlik method of Rainflow Cycle Counting algorithm in frequency domain. The first phase of the research showed the legacy algorithm based on transfer function developed using FEM (Finite Element Method) method in Abaqus environment and is very conservative. The second stage of the research aims to develop a novel method which allowing for more robust and accurate damage estimation. For this purpose, the Monte Carlo method for retrieving random signal in the time domain from signal in frequency domain was used. To obtain the system transfer function, – the 1 g load harmonic system response was obtained using FEM analysis. It was subsequently scaled linearly by the PSD input curve for random loading and sine wave, or sine sweep function for deterministic loading to calculate the cumulative system response of the linear system. The research allows the development of a novel method to precisely estimate vibration damage using combined time and frequency domains approach, based on effective frequency domain FEM analysis of the linear system. The new proposed method can be also used for precise replication of test conditions via considering signal clipping and frequency resolution used for real testing.

Using Computer Technique for Developing Method for Vibration Damage Estimation Under Combined Random and Deterministic Loading

Department of Machine Design and Research

Wroclaw University of Technology and Science

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper is focusses on developing a novel method for vibration damage estimation for military helicopters, fighter aircrafts and any other aircraft exposed...

Using Computer Technique for Developing Method for Vibration Damage Estimation Under Combined Random and Deterministic Loading

Pubblicato online: 30 dic 2023

Pagine: 558 - 569

Ricevuto: 23 mar 2023

Accettato: 16 giu 2023

DOI: https://doi.org/10.2478/ama-2023-0065

Parole chiave
vibration damage, random vibration, FEM, Monte Carlo method, frequency, time domain Rainflow Cycle Counting algorithms

© 2023 Michał Ptak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Using Computer Technique for Developing Method for Vibration Damage Estimation Under Combined Random and Deterministic Loading

Pubblicato online: 30 dic 2023

Pagine: 558 - 569

Ricevuto: 23 mar 2023

Accettato: 16 giu 2023

DOI: https://doi.org/10.2478/ama-2023-0065

Parole chiavevibration damage, random vibration, FEM, Monte Carlo method, frequency, time domain Rainflow Cycle Counting algorithms

© 2023 Michał Ptak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
vibration damage, random vibration, FEM, Monte Carlo method, frequency, time domain Rainflow Cycle Counting algorithms