<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The method of model triboexperimental studies to determine the basic mathematical model parameters of materials wear resistance at sliding friction is considered. The quantitative relative experimental characteristics of wear resistance of glass fibre and carbon fibre reinforced polyamide used in metal-polymer gear couple have been determined. Wear resistance functions of these functional polymeric composites have been established as the basic ones in the tribokinetic mathematical model of material wear for sliding friction conditions. Also, according to the conducted researches, wear resistance diagrams were constructed. They may be used as graphical indicators of wear resistance in the required range of specific friction forces. The dependences that connect the characteristic functions of wear resistance of these materials (obtained by the developed mathematical tribokinetic wear model) with linear wear and gearing service life are presented.</p>
</abstract>

The method of model triboexperimental studies to determine the basic mathematical model parameters of materials wear resistance at sliding friction is considered. The quantitative relative experimental characteristics of wear resistance of glass fibre and carbon fibre reinforced polyamide used in metal-polymer gear couple have been determined. Wear resistance functions of these functional polymeric composites have been established as the basic ones in the tribokinetic mathematical model of material wear for sliding friction conditions. Also, according to the conducted researches, wear resistance diagrams were constructed. They may be used as graphical indicators of wear resistance in the required range of specific friction forces. The dependences that connect the characteristic functions of wear resistance of these materials (obtained by the developed mathematical tribokinetic wear model) with linear wear and gearing service life are presented.

Experimental Estimation of Wear Resistance of Polyamide Composites, Reinforced By Carbon and Glass Fibres Used in Metal-Polymer Gearings

Aerospace Faculty, Department of engineering, standardization and certification

Aerospace Faculty, Department of computerized electrotechnical systems and technologies

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The method of model triboexperimental studies to determine the basic mathematical model parameters of materials wear resistance at sliding friction is...

Experimental Estimation of Wear Resistance of Polyamide Composites, Reinforced By Carbon and Glass Fibres Used in Metal-Polymer Gearings

Pubblicato online: 08 mar 2021

Pagine: 206 - 210

Ricevuto: 18 mag 2020

Accettato: 05 mar 2021

DOI: https://doi.org/10.2478/ama-2020-0029

Parole chiave
Method for determining the characteristics and functions of wear resistance, reinforced polyamide, dispersed glass and carbon fibres, metal-polymer gears

© 2020 Myron Chernets et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Experimental Estimation of Wear Resistance of Polyamide Composites, Reinforced By Carbon and Glass Fibres Used in Metal-Polymer Gearings

Pubblicato online: 08 mar 2021

Pagine: 206 - 210

Ricevuto: 18 mag 2020

Accettato: 05 mar 2021

DOI: https://doi.org/10.2478/ama-2020-0029

Parole chiaveMethod for determining the characteristics and functions of wear resistance, reinforced polyamide, dispersed glass and carbon fibres, metal-polymer gears

© 2020 Myron Chernets et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
Method for determining the characteristics and functions of wear resistance, reinforced polyamide, dispersed glass and carbon fibres, metal-polymer gears