[1. Al-Bukhaiti M. A., Ahmed S. M., Badran F. M. F., Emara K. M., Effect of impingement angle on slurry erosion behaviour and mechanisms of 1017 steel and high-chromium white cast iron. Wear, 262 (2007) 1187–1198.10.1016/j.wear.2006.11.018]Search in Google Scholar
[2. Oka Y. I., Okamura K., Yoshida T., Practical estimation of erosion damage caused by solid particle impact: Part 1: Effects of impact parameters on a predictive equation. Wear, 259 (2005) 95–101.10.1016/j.wear.2005.01.039]Search in Google Scholar
[3. Arora H. S., Grewal H. S., Singh H., Mukherjee S., Zirconium based bulk metallic glass-Better resistance to slurry erosion compared to hydroturbine steel. Wear, 307 (2013) 28–34.10.1016/j.wear.2013.08.016]Search in Google Scholar
[4. Finnie I., Erosion of surfaces by solid particles. Wear 3 (1960) 87–103.10.1016/0043-1648(60)90055-7]Search in Google Scholar
[5. Bitter J.G.A., A study of erosion phenomena, part I. Wear 6 (1963) 5–21.10.1016/0043-1648(63)90003-6]Search in Google Scholar
[6. Zbrowski A., Mizak W., Analiza systemów wykorzystywanych w badaniach uderzeniowego zużycia erozyjnego. Problemy eksploatacji, 3 (2011) 235–250, (in Polish)]Search in Google Scholar
[7. Sinha S.L., Dewangan S.K., Sharma A., A review on particulate slurry erosive wear of industrial materials: In context with pipeline transportation of mineral−slurry. Particulate Science and Technology, 35 (2017) 103–118.10.1080/02726351.2015.1131792]Search in Google Scholar
[8. Grewal H. S., Agrawal A., Singh H., Design and development of high-velocity slurry erosion test rig using CFD. Journal of Materials Engineering and Performance, 22 (2013) 152–161.10.1007/s11665-012-0219-y]Search in Google Scholar
[9. Finnie I., Some reflections on the past and future of erosion. Wear 186–187 (1995) 1–10.10.1016/0043-1648(95)07188-1]Search in Google Scholar
[10. Buszko M.H., Krella A.K., Slurry erosion – design of test devices. Advances in Materials Science 17 (2017) 5–17.10.1515/adms-2017-0007]Search in Google Scholar
[11. Shitole P. P., Gawande S. H., Desale G. R., Nandre B. D., Effect of impacting particle kinetic energy on slurry erosion wear. Journal of Bio-and Tribo-Corrosion 1 (2015) 1–9.10.1007/s40735-015-0028-6]Search in Google Scholar
[12. Desale G.R., Gandhi B.K., Jain S.C., Slurry erosion of ductile materials under normal impact condition. Wear, 264 (2008) 322–330.10.1016/j.wear.2007.03.022]Search in Google Scholar
[13. Grewal H. S., Agrawal A., Singh H., Shollock B. A., Slurry erosion performance of Ni-Al2O3 based thermal-sprayed coatings: Effect of angle of impingement. Journal of Thermal Spray Technology, 23 (2014) 389–401.10.1007/s11666-013-0013-x]Search in Google Scholar
[14. Grewal H. S., Agrawal A., Singh H., Slurry erosion mechanism of hydroturbine steel: Effect of operating parameters. Tribolology Letters, 52 (2013) 287–303.10.1007/s11249-013-0213-z]Search in Google Scholar
[15. Lathabai S., Pender D. C., Microstructural influence in slurry erosion of ceramics. Wear, 189 (1995) 122–135.10.1016/0043-1648(95)06679-9]Search in Google Scholar
[16. Thakur L., Arora N., A comparative study on slurry and dry erosion behaviour of HVOF sprayed WC-CoCr coatings. Wear, 303 (2013).10.1016/j.wear.2013.03.028]Search in Google Scholar
[17. Paul C.P., Gandhi B.K., Bhargava P., Dwivedi D.K., Kukreja L.M., Cobalt-Free Laser Cladding on AISI Type 316L Stainless Steel for improved cavitation and slurry erosion Wear Behavior. Journal of Materials Engineering and Performance, 23 (2014) 4463–4471.10.1007/s11665-014-1244-9]Search in Google Scholar
[18. Hejwowski T., Nowoczesne powłoki nakładane cieplnie odporne na zużycie ścierne i erozyjne. Politechnika Lubelska, Lublin, 2013, (in Polish).]Search in Google Scholar
[19. Clark H. M., Hawthorne H. M., Xie Y., Wear rates and specific energies of some ceramic, cermet and metallic coatings determined in the Coriolis erosion tester. Wear, 233–235 (1999) 319–327.10.1016/S0043-1648(99)00213-6]Search in Google Scholar
[20. Santa J.F., Baena J.C., Toro A., Slurry erosion of thermal spray coatings and stainless steels for hydraulic machinery. Wear 263 (2007) 258–264.10.1016/j.wear.2006.12.061]Search in Google Scholar
[21. Santa J.F., Espitia L.A., Blanco J.A., Romo S.A., Toro A., Slurry and cavitation erosion resistance of thermal spray coatings. Wear, 267 (2009) 160–167.10.1016/j.wear.2009.01.018]Search in Google Scholar
[22. Mann B.S., High-energy particle impact wear resistance of hard coatings and their application in hydroturbines. Wear, 237 (2000) 140–146.10.1016/S0043-1648(99)00310-5]Search in Google Scholar
[23. Mann B.S., Arya V., Abrasive and erosive wear characteristics of plasma nitriding and HVOF coatings: Their application in hydro turbines. Wear, 249 (2001) 354–360.10.1016/S0043-1648(01)00537-3]Search in Google Scholar
[24. Romo S.A., Santa J.F., Giraldo J.E., Toro A., Cavitation and high-velocity slurry erosion resistance of welded Stellite 6 alloy. Tribology International, 47 (2012) 16–24.10.1016/j.triboint.2011.10.003]Search in Google Scholar
[25. Hutchings I.M., Tribology: Friction and Wear of Engineering Materials. Edward Arnold, London, 1992.10.1016/0261-3069(92)90241-9]Search in Google Scholar
[26. Thakur P.A., Khairnar H.S., Deore E.R., More S.R., Development of slurry jet erosion tester to simulate the erosion wear due to solid-liquid mixture. International Journal of Novel Research in Engineering and Science, 2 (2015) 14–20.]Search in Google Scholar
[27. Saleh B., Ahmed S.M., Slurry erosion-corrosion of carburized AISI 5117 steel. Tribolology Letters, 51 (2013) 135–142.10.1007/s11249-013-0155-5]Search in Google Scholar
[28. Zhao H.X., Goto H., Matsumura M., Takahashi T., Yamamoto M., Slurry erosion properties of ceramic coatings. Wear, 233–235 (1999) 608–614.10.1016/S0043-1648(99)00238-0]Search in Google Scholar
[29. Fang Q., Xu H., Sidky P.S., Hocking M.G., Erosion of ceramic materials by a sand/water slurry jet. Wear, 224 (1999) 183–193.10.1016/S0043-1648(98)00309-3]Search in Google Scholar
[30. Laguna-Camacho J.R., Marquina-Chávez A., Méndez-Méndez J.V., Vite-Torres M., Gallardo-Hernández E.A., Solid particle erosion of AISI 304, 316 and 420 stainless steels. Wear, 301 (2013) 398–405.10.1016/j.wear.2012.12.047]Search in Google Scholar
[31. Basha S. S., Periasamy V. M., Kamaraj M., Slurry erosion resistance of laser-modified 16Cr – 5Ni stainless steel. International Journal of ChemTech Research, 6 (2014) 691–704.]Search in Google Scholar
[32. de Bree S., Rosenbrand W., de Gee A., On the erosion resistance in water-sand mixtures of steels for application in slurry pipelines. Proc. 8th Int. Conf. Hydraulic Transport of Solids in Pipes, BHRA Fluid Engineering, Johannesburg, 1982, Paper C3.]Search in Google Scholar
[33. Fuyan L., Hesheng S., The effect of impingement angle on slurry erosion. Wear, 141 (1991) 279–289.10.1016/0043-1648(91)90274-X]Search in Google Scholar
[34. Gandhi B.K., Singh S.N., Seshadri V., Study of the parametric dependence of erosion wear for the parallel flow of solid-liquid mixtures. Tribology International, 32 (1999) 275–282.10.1016/S0301-679X(99)00047-X]Search in Google Scholar
[35. Gupta R., Singh S. N., Sehadri V., Prediction of uneven wear in a slurry pipeline on the basis of measurements in a pot tester. Wear, 184 (1995) 169–178.10.1016/0043-1648(94)06566-7]Search in Google Scholar
[36. Lin F. Y., Shao H. S., Effect of impact velocity on slurry erosion and a new design of a slurry erosion tester. Wear, 143 (1991) 231–240.10.1016/0043-1648(91)90098-F]Search in Google Scholar
[37. Thapa B., Sand erosion in hydraulic machinery. PhD Thesis, Norwegian University of Science and Technology (NTNU), 2004.]Search in Google Scholar
[38. Levy A.V., Yau P., Erosion of steels in liquid slurries. Wear, 98 (1984) 163–182.10.1016/0043-1648(84)90225-4]Search in Google Scholar
[39. Nguyen Q. B. Lim C.Y.H., Nguyen V.B., Wan Y.M., Nai B., Zhang Y.W., Gupta M., Slurry erosion characteristics and erosion mechanisms of stainless steel. Tribology International, 79 (2014) 1–7.10.1016/j.triboint.2014.05.014]Search in Google Scholar
[40. Hawthorne H.M., Some Coriolis slurry erosion test developments. Tribology International, 35 (2002) 625–630.10.1016/S0301-679X(02)00053-1]Search in Google Scholar
[41. Clark H.M., Tuzson J., Wong K.K., Measurements of specific energies for erosive wear using a Coriolis erosion tester. Wear 241 (2000) 1–9.10.1016/S0043-1648(00)00327-6]Search in Google Scholar
[42. Singh G., Virdi R. L., Goyal K., Experimental investigation of slurry erosion behaviour of hard faced AISI 316L Stainless Steel. Universal Journal of Mechanical Engineering 3 (2015) 52–56.10.13189/ujme.2015.030204]Search in Google Scholar
[43. Grewal H. S., Arora H. S., Agrawal A., Singh H., Mukherjee S., Slurry erosion of thermal spray coatings: Effect of sand concentration. Procedia Engineering 68 (2013) 484–490.10.1016/j.proeng.2013.12.210]Search in Google Scholar
[44. Turenne S., Fiset M., Masounave J., The effect of sand concentration on the erosion of materials by a slurry jet. Wear, 133 (1989) 95–106.10.1016/0043-1648(89)90116-6]Search in Google Scholar
[45. Prasad B.K., Jha A.K., Modi O.P., Yegneswaran A.H., Effect of sand concentration in the medium and travel distance and speed on the slurry wear response of a zinc-based alloy alumina particle composite. Tribolology Letters, 17 (2004) 301–304.10.1023/B:TRIL.0000032468.27468.2c]Search in Google Scholar
[46. Burnett A.J., De Silva S.R., Reed A.R., Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186–187 (1995) 168–178.10.1016/0043-1648(95)07143-1]Search in Google Scholar
[47. Kleis. I, Kulu P., Solid Particle Erosion. [In] Influence of Particle Concentration. Springer-Verlag London Limited, 2008, 24–27.]Search in Google Scholar
[48. Bong E.Y., Parthasarathy R., Wu J., Eshtiaghi N., Effect of baffles on solid-liquid mass transfer coefficient in high solid concentration mixing. Chemeca 2012: Quality of life through chemical engineering, Wellington, New Zealand, 2012, 1870–1880.]Search in Google Scholar
[49. Shehadeh M., Anany M., Saqr K.M., Hassan I., Experimental investigation of erosion corrosion phenomena in a steel fitting due to plain and slurry seawater flow. International Journal of Mechanical and Materials Engineering, 9 (2014) 1–9.10.1186/s40712-014-0022-7]Search in Google Scholar
[50. Dabirian R., Mohan R., Shoham O., Kouba G., Critical sand deposition velocity for gas liquid stratified flow in horizontal pipes. Journal of Natural Gas Science and Engineering, 33 (2016) 527–536.10.1016/j.jngse.2016.05.008]Search in Google Scholar
[51. Bartosik A., Influence of coarse-dispersive solid phase on the ‘particles–wall’ shear stress in turbulent slurry flow with high solid concentration. The Archive of Mechanical Engineering, 57 (2010) 45–68.10.2478/v10180-010-0003-1]Search in Google Scholar
[52. Bjordal M., Bardal E., Rogne T., Eggen T.G., Combined erosion and corrosion of thermal sprayed WC and CrC coatings. Surface and Coatings Technology 70 (1995) 215–220.10.1016/0257-8972(94)02266-S]Search in Google Scholar
[53. Padhy M.K., Saini R.P., Effect of size and concentration of silt particles on erosion of Pelton turbine buckets. Energy 34 (2009) 1477–1483.10.1016/j.energy.2009.06.015]Search in Google Scholar
[54. Elkholy A., Prediction of abrasion wear for slurry pump materials. Wear, 84 (1983) 39–49.10.1016/0043-1648(83)90117-5]Search in Google Scholar
[55. Lindgren M., Perolainen J., Slurry pot investigation of the influence of erodent characteristics on the erosion resistance of austenitic and duplex stainless steel grades. Wear, 319 (2014) 38–48.10.1016/j.wear.2014.07.006]Search in Google Scholar
[56. Zitoun K., Sastry S., Guezennec Y., Investigation of three dimensional interstitial velocity, solids motion, and orientation in solid–liquid flow using particle tracking velocimetry. International Journal of Multiphase Flow, 27 (2001) 1397–1414.10.1016/S0301-9322(01)00011-8]Search in Google Scholar
[57. Yang J.-Z., Fang M.-H., Zhao-Hui Huang Z.-H., Hu X.-Z., Liu Y.-G., Sun H.-R., Huang J.-T., Li X.-Ch., Solid particle impact erosion of alumina-based refractories at elevated temperatures. Journal of the European Ceramic Society 32 (2012) 283–289.10.1016/j.jeurceramsoc.2011.08.017]Search in Google Scholar
[58. Sundararajan G., Roy M., Solid particle erosion behavior of metallic materials at room and elevated temperatures. Tribology International, 30 (1997) 339–359.10.1016/S0301-679X(96)00064-3]Search in Google Scholar
[59. Wang X., Fang M., Zhang L.-C., Ding H., Liu Y.-G., Huang Z., Huang S., Yang J., Solid particle erosion of alumina ceramics at elevated temperature. Materials Chemistry and Physics, 139 (2013) 765–769.10.1016/j.matchemphys.2013.02.029]Search in Google Scholar
[60. Sarlin E., Lindgren M., Suihkonen R., Siljander S., Kakkonen M., Vuorinen J., High-temperature slurry erosion of vinylester matrix composites – The effect of test parameters. Wear, 328–329 (2015) 488–497.10.1016/j.wear.2015.03.021]Search in Google Scholar
[61. Stack M.M., Pungwiwat N., Slurry erosion of metallics, polymers, and ceramics: particle size effects. Materials Science and Technology 15 (1999) 337–344.10.1179/026708399101505770]Search in Google Scholar
[62. Gandhi B.K., Borse S.V., Nominal particle size of multi-sized particulate slurries for evaluation of erosion wear and effect of fine particles. Wear, 257 (2004) 73–79.10.1016/j.wear.2003.10.013]Search in Google Scholar
[63. Desale G.R., Gandhi B.K., Jain S.C., Particle size effects on the slurry erosion of aluminium alloy (AA 6063). Wear, 266 (2009) 1066–1071.10.1016/j.wear.2009.01.002]Search in Google Scholar
[64. Sheldon G.L., Finnie I., On the ductile behaviour of nominally brittle materials during erosive cutting. Journal of Engineering for Industry, 88 (1966) 387–392.10.1115/1.3672666]Search in Google Scholar
[65. Stachowiak G.W., Batchelor A.W., Engineering Tribology (fourth edition). [In] Abrasive, Erosive and Cavitation Wear. Elsevier Butterworth-Heinemann, 2014, 525–576.10.1016/B978-0-12-397047-3.00011-4]Search in Google Scholar
[66. Lynn R.S., Wong K.K., Clark H.M., On the particle size effect in slurry erosion. Wear, 149 (1991) 55–71.10.1016/0043-1648(91)90364-Z]Search in Google Scholar
[67. Stachowiak G.W., Particle angularity and its relationship to abrasive and erosive wear. Wear, 241 (2000) 214–219.10.1016/S0043-1648(00)00378-1]Search in Google Scholar
[68. Bahadur S., Badruddin R., Erodent particle characterization and the effect of particle size and shape on erosion. Wear, 138 (1990) 189–208.10.1016/0043-1648(90)90176-B]Search in Google Scholar
[69. Desale G.R., Gandhi B.K., Jain S.C., Effect of physical properties of solid particle on erosion wear of ductile materials. Porc. of World Tribology Congress III, Washington, D.C., USA, 2005, 149–150.10.1115/WTC2005-63997]Search in Google Scholar
[70. Raadnui S., Wear particle analysis - Utilization of quantitative computer image analysis: A review. Tribology International, 38 (2005) 871–878.10.1016/j.triboint.2005.03.013]Search in Google Scholar
[71. Bouwman A.M., Bosma J.C., Vonk P., Wesselingh J. (Hans) A., Frijlink H.W., Which shape factor(s) best describe granules?. Powder Technology, 146 (2004) 66–72.10.1016/j.powtec.2004.04.044]Search in Google Scholar
[72. Roylance B.J., Raadnui S., The morphological attributes identifying wear mechanisms of wear particles their role in identifyinf wear mechanisms. Wear 175 (1994) 115–1210.1016/0043-1648(94)90174-0]Search in Google Scholar
[73. Cox E.P., A method of assigning numerical and percentage values to the degree of roundnedd of sand grains. Journal of Palentology, 1 (1927) 179–183.]Search in Google Scholar
[74. Al-Bukhaiti M.A., Abouel-Kasem A., Emara K.M., Ahmed S.M., Particle shape and size effects on slurry erosion of AISI 5117 steels. Journal of Tribology, 138 (2016).10.1115/1.4031987]Search in Google Scholar
[75. Chen Q., Li D.Y., Computer simulation of solid particle erosion. Wear, 254 (2003) 203–210.10.1016/S0043-1648(03)00006-1]Search in Google Scholar
[76. Singh J., Kumar S., Mohapatra S.K, Kumar S., Shape simulation of solid particles by digital interpretations of scanning electron micrographs using IPA technique. Materials Today: Proceedings, 5 (2018) 17786–17791.10.1016/j.matpr.2018.06.103]Search in Google Scholar
[77. Lathabai S., Effect of grain size on the slurry erosive wear of Ce-TZP ceramics. Scripta mater., 43 (2000) 465–470.10.1016/S1359-6462(00)00415-2]Search in Google Scholar
[78. Shetty D.K., Wright I.G., Stropki J.T., Slurry erosion of WC-Co cermets and ceramics. ASLE Transactions, 28 (1985) 123–133.10.1080/05698198508981604]Search in Google Scholar
[79. Wood R.J.K., Mellor B.G., Binfield M.L., Sand erosion performance of detonation gun applied tungsten carbide/cobalt-chromium coatings. Wear, 211 (1997) 70–83.10.1016/S0043-1648(97)00071-9]Search in Google Scholar
[80. Feng Z., Ball A., The erosion of four materials using seven erodents-towards an understanding. Wear, 233–235 (1999) 674–684.10.1016/S0043-1648(99)00176-3]Search in Google Scholar
[81. Wang Y-F., Yang Z-G., Finite element model of erosive wear on ductile and brittle materials. Wear 265 (2008) 871–878.10.1016/j.wear.2008.01.014]Search in Google Scholar
[82. Javaheri V., Porter D., KuokkalaV-T., Slurry erosion of steel – Review of tests, mechanisms and materials. Wear, 408–409 (2018) 248–273.10.1016/j.wear.2018.05.010]Search in Google Scholar
[83. Mellali M., Grimaud A., Leger A.C., Fauchais P., Lu J., Alumina grit blasting parameters for surface preparation in the Plasma Spraying Operation. Journal of Thermal Spray Technology, 6 (1992) 217–227.10.1007/s11666-997-0016-6]Search in Google Scholar
[84. Syamsundar C., Chatterjee D., Kamaraj M., Maiti A.K., Erosion Characteristics of Nanoparticle-Reinforced Polyurethane Coatings on Stainless Steel Substrate. J. Mater. Eng. Perform., 24 (2015) 1391–1405.10.1007/s11665-015-1403-7]Search in Google Scholar
[85. Shipway P.H., Hutchings I.M., The role of particle properties in the erosion of brittle materials. Wear, 193 (1996) 105–113.10.1016/0043-1648(95)06694-2]Search in Google Scholar
[86. Tsai W., Humphrey J.A.C., Cornet I., Levy A.V., Experimental measurement of accelerated erosion in a slurry pot tester. Wear, 68 (1981) 289–303.10.1016/0043-1648(81)90178-2]Search in Google Scholar
[87. Levy A.V., The solid particle erosion behavior of steel as a function of microstructure. Wear, 68 (1981) 269–287.10.1016/0043-1648(81)90177-0]Search in Google Scholar
[88. Gadhikar A.A., Sharma A., Goel D.B., Sharma C.P., Effect of carbides on erosion resistance of 23-8-N steel. Bull. Mater. Sci., 37 (2014) 315–319.10.1007/s12034-014-0656-3]Search in Google Scholar
[89. Kumar A., Sharma A., Goel S.K., Effect of heat treatment on microstructure, mechanical properties and erosion resistance of cast 21-4-N nitronic steel. SOJ Mater. Sci. Eng., 4 (2016) 1–5.10.15226/sojmse.2016.00122]Search in Google Scholar
[90. Meng H.C., Ludema K.C., Wear models and predictive equations: their form and content. Wear, 181–183 (1995) 443–457.10.1016/0043-1648(95)90158-2]Search in Google Scholar
[91. Wang G.R., Chu F., Tao S.Y., Jiang L., Zhu H., Optimization design for throttle valve of managed pressure drilling based on CFD erosion simulation and response surface methodology. Wear 338–339 (2015) 114–121.10.1016/j.wear.2015.06.001]Search in Google Scholar
[92. Zhang J., Kang J., Fan J., Gao J., Research on erosion wear of high-pressure pipes during hydraulic fracturing slurry flow. Journal of Loss Prevention in the Process Industries, 43 (2016) 438–448.10.1016/j.jlp.2016.07.008]Search in Google Scholar
[93. Singh J., Singh J.P., Singh M., Szala M., Computational analysis of solid particle-erosion produced by bottom ash slurry in 90° elbow. CMES’18, MATEC Web Conf., 252 (2019) 04008.10.1051/matecconf/201925204008]Search in Google Scholar
[94. Hassan M.A., El-Sharief M.A., Aboul-Kasem A., Ramesh S., Purbolaksono J.,A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials and Design, 39 (2012) 186–191.10.1016/j.matdes.2012.02.012]Search in Google Scholar
[95. Hernik B., Pronobis M., Wejkowski R., Wojnar W., Experimental verification of a CFD model intended for the determination of restitution coefficients used in erosion modelling. WTiUE 2016, E3S Web of Conferences, 13 (2017) 05001.10.1051/e3sconf/20171305001]Search in Google Scholar
[96. Nicholls J.R., Coatings and hardfacing alloys for corrosion and wear resistance in diesel engines. Mater. Sci. Technol., 10 (1994) 1002–1012.10.1179/mst.1994.10.11.1002]Search in Google Scholar
[97. Bhushan B., Fundamentals of Tribology and Bridging the Gab between Macro- and Micro/Nanoscale. B. Bhushan [ed.], Kluwer Academic Publishers, Netherlands, 2014.]Search in Google Scholar
[98. Carter C.B., Norton M.G., Ceramic Materials. Springer New York, New York, 2013.10.1007/978-1-4614-3523-5]Search in Google Scholar
[99. Preece C.M., Macmilla N.H., Erosion. Ann. Rev. Mater. Sci., 7 (1977) 95–121.10.1146/annurev.ms.07.080177.000523]Search in Google Scholar
[100. Bhandari S., Singh H., Kumar H., Rastogi V., Slurry erosion performance study of detonation gun-sprayed WC-10Co-4Cr coatings on CF8M steel under hydro-accelerated conditions. J. Therm. Spray Technol. 21 (2012) 1054–1064.10.1007/s11666-012-9799-1]Search in Google Scholar
[101. Quinn T.F.J., The role of wear in the failure of common tribosystems. Wear, 100 (1984) 399–436.10.1016/0043-1648(84)90024-3]Search in Google Scholar
[102. Larson J.M., Jenkins L.F., Narasimhan S.L., Belmore J.E., Engine Valves-Design and Material Evolution. J. Eng. Gas Turbines Power 109 (1987) 355–361.10.1115/1.3240048]Search in Google Scholar
[103. Zahavi J., Schmitt G.F., Solid particle erosion of polymeric coatings. Wear, 71 (1981) 191–210.10.1016/0043-1648(81)90338-0]Search in Google Scholar
[104. Lima C.R.C., Mojena M.A.R., Della Rovere C.A., de Souza N.F.C., Fals H.D.C., Slurry erosion and corrosion behavior of some engineering polymers applied by low-pressure flame spray. J. Mater. Eng. Perform., 25 (2016) 4911–4918.10.1007/s11665-016-2317-8]Search in Google Scholar