Verification of Strength of the Welded Joints by using of the Aramis Video System

1. Aramis v6.1 User Manual, GOM Gmbh, 2009.Search in Google Scholar

2. ASTM E 1820-05, Standard Test Method for Measurement of Fracture Toughnes,. ASTM, Philadelphia; 2000.Search in Google Scholar

3. Bhadeshia H.K.D.H. (2001), Bainite in Steels, Institute of Materials, London.Search in Google Scholar

4. Dzioba I. (2011), The influence of the microstructural components on fracture toughness of 13HMF steel, Materials Science, 47(5), 357-364.10.1007/s11003-012-9441-xSearch in Google Scholar

5. Dzioba I., Pała T. (2014), Mechanical properties of welded joints made of high-strength steel S960-QC by laser method, Logistyka, 6, 3458-3464 (in Polish).Search in Google Scholar

6. Dzioba I., Pała T., Valkonen I. (2013), Strength and fracture toughness of the welded joints made of high-strength ferritic steel, Acta Mechanica et Automatica, 7(4), 226-229.10.2478/ama-2013-0038Search in Google Scholar

7. Gałkiewicz J., Pała T., Dzioba I. (2012), Mechanical properties of the welded joints of ultra-strength ferritic steels, XXIII Symposium on Fatigue and Fracture Mechanics Bydgoszcz–Pieczyska, 63-72 (in Polish).Search in Google Scholar

8. Górka J. (2015), Weldability of Thermomechanically Treated Steels Having a High Yield Point, Archives of Metallurgy and Materials, 60(1), 469-475.10.1515/amm-2015-0076Search in Google Scholar

9. Hakansson K., Weld Metal Properties for Extra High Strength Steels, Report 2002 – August, Division of Welding, Department of Production Engineering, The Royal Institute of Technology, 1-36.Search in Google Scholar

10. Keehan E., Zachrisson J., Karlsson L. (2010), Influence of cooling rate on microstructure and properties of high strength steel weld metal, Science and Technology of Welding and Joining, 15, 233-238.10.1179/136217110X12665048207692Search in Google Scholar

11. Lambert-Perlade A., Gourgues A.F., Besson J., Sturel T., Pineau A. (2004), Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel, Metall Mater Trans A; 35(13):1039-53.10.1007/s11661-004-1007-6Search in Google Scholar

12. Lillemäe I., Remes H., Liinalampi S., Itävuo A. (2016), Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints, Welding in the World, 4, 1-10.10.1007/s40194-016-0326-8Search in Google Scholar

13. Lisiecki A. (2014), Weldability of Thermomechanically Treated Steels Having a High Yield Point, Archives of Metallurgy and Materials, 59(4), 1625-1631.10.2478/amm-2014-0276Search in Google Scholar

14. Liu F., Yu X., Huang C., He L., Chen Y., Bu W. (2015), Microstructure and mechanical properties of AerMet 100 ultra-high strength steel joints by laser welding, Journal of Wuhan University of Technology-Mater. Sci. Ed., 8/2015, 30, 827-830.Search in Google Scholar

15. Mazanek K., Sniezek l., Slezak T. (2013), Fatigue research of welded joints of high strength S960QL steel, Bulletin of the Military University of Technology, 42(1), 253-269 (in Polish).Search in Google Scholar

16. Pała T., Gałkiewicz J., Dzioba I. (2016), Determination of Strain and Stress Fields in Laser Welded Joints by Means of the Aramis Video System, Solid State Phenomena, 250, 151-156.10.4028/www.scientific.net/SSP.250.151Search in Google Scholar

17. PN-EN ISO 6507-1:2006. Metals, toughness measurement by the Vicker's method, part 1, testing method (in Polish).Search in Google Scholar

18. PN-EN ISO 6892-1:2010. Metals, tensile test, part 1: Testing method at room temperature (in Polish).Search in Google Scholar

19. Tweed J.R., Knott J.F. (1987), Micromechanisms of failure in C-Mn weld metal, Acta Metallurgica, 35(7), 1401-1414.10.1016/0001-6160(87)90087-3Search in Google Scholar

20. Yang Y., Shi L., Xu Z., Lu H., Chen X., Wang X. (2015), Fracture toughness of the materials in welded joints of X80 pipeline steel, Engineering Fracture Mechanics, 148, 337-349.10.1016/j.engfracmech.2015.07.061Search in Google Scholar