[1. Aramis v6.1 User Manual, GOM Gmbh, 2009.]Search in Google Scholar
[2. ASTM E 1820-05, Standard Test Method for Measurement of Fracture Toughnes,. ASTM, Philadelphia; 2000.]Search in Google Scholar
[3. Bhadeshia H.K.D.H. (2001), Bainite in Steels, Institute of Materials, London.]Search in Google Scholar
[4. Dzioba I. (2011), The influence of the microstructural components on fracture toughness of 13HMF steel, Materials Science, 47(5), 357-364.10.1007/s11003-012-9441-x]Search in Google Scholar
[5. Dzioba I., Pała T. (2014), Mechanical properties of welded joints made of high-strength steel S960-QC by laser method, Logistyka, 6, 3458-3464 (in Polish).]Search in Google Scholar
[6. Dzioba I., Pała T., Valkonen I. (2013), Strength and fracture toughness of the welded joints made of high-strength ferritic steel, Acta Mechanica et Automatica, 7(4), 226-229.10.2478/ama-2013-0038]Search in Google Scholar
[7. Gałkiewicz J., Pała T., Dzioba I. (2012), Mechanical properties of the welded joints of ultra-strength ferritic steels, XXIII Symposium on Fatigue and Fracture Mechanics Bydgoszcz–Pieczyska, 63-72 (in Polish).]Search in Google Scholar
[8. Górka J. (2015), Weldability of Thermomechanically Treated Steels Having a High Yield Point, Archives of Metallurgy and Materials, 60(1), 469-475.10.1515/amm-2015-0076]Search in Google Scholar
[9. Hakansson K., Weld Metal Properties for Extra High Strength Steels, Report 2002 – August, Division of Welding, Department of Production Engineering, The Royal Institute of Technology, 1-36.]Search in Google Scholar
[10. Keehan E., Zachrisson J., Karlsson L. (2010), Influence of cooling rate on microstructure and properties of high strength steel weld metal, Science and Technology of Welding and Joining, 15, 233-238.10.1179/136217110X12665048207692]Search in Google Scholar
[11. Lambert-Perlade A., Gourgues A.F., Besson J., Sturel T., Pineau A. (2004), Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel, Metall Mater Trans A; 35(13):1039-53.10.1007/s11661-004-1007-6]Search in Google Scholar
[12. Lillemäe I., Remes H., Liinalampi S., Itävuo A. (2016), Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints, Welding in the World, 4, 1-10.10.1007/s40194-016-0326-8]Search in Google Scholar
[13. Lisiecki A. (2014), Weldability of Thermomechanically Treated Steels Having a High Yield Point, Archives of Metallurgy and Materials, 59(4), 1625-1631.10.2478/amm-2014-0276]Search in Google Scholar
[14. Liu F., Yu X., Huang C., He L., Chen Y., Bu W. (2015), Microstructure and mechanical properties of AerMet 100 ultra-high strength steel joints by laser welding, Journal of Wuhan University of Technology-Mater. Sci. Ed., 8/2015, 30, 827-830.]Search in Google Scholar
[15. Mazanek K., Sniezek l., Slezak T. (2013), Fatigue research of welded joints of high strength S960QL steel, Bulletin of the Military University of Technology, 42(1), 253-269 (in Polish).]Search in Google Scholar
[16. Pała T., Gałkiewicz J., Dzioba I. (2016), Determination of Strain and Stress Fields in Laser Welded Joints by Means of the Aramis Video System, Solid State Phenomena, 250, 151-156.10.4028/www.scientific.net/SSP.250.151]Search in Google Scholar
[17. PN-EN ISO 6507-1:2006. Metals, toughness measurement by the Vicker's method, part 1, testing method (in Polish).]Search in Google Scholar
[18. PN-EN ISO 6892-1:2010. Metals, tensile test, part 1: Testing method at room temperature (in Polish).]Search in Google Scholar
[19. Tweed J.R., Knott J.F. (1987), Micromechanisms of failure in C-Mn weld metal, Acta Metallurgica, 35(7), 1401-1414.10.1016/0001-6160(87)90087-3]Search in Google Scholar
[20. Yang Y., Shi L., Xu Z., Lu H., Chen X., Wang X. (2015), Fracture toughness of the materials in welded joints of X80 pipeline steel, Engineering Fracture Mechanics, 148, 337-349.10.1016/j.engfracmech.2015.07.061]Search in Google Scholar