<abstract xmlns="http://www.w3.org/1999/xhtml">Possibilities of using robust controllers for a shell-and-tube heat exchanger control were studied, tested and compared by simulations and obtained results are presented in this paper. The heat exchanger was used to pre-heat petroleum by hot water; the controlled output was the measured output temperature of the heated fluid — petroleum, and the control input was the volumetric flow rate of the heating fluid — water. Robust controllers were designed using ℋ2, ℋ∞, ℋ2/ℋ∞ strategies and <italic>μ</italic>-synthesis. A comparison with the classical PID control demonstrated the superiority of the proposed robust control especially in case when the controlled process is affected by disturbances.</abstract>

Possibilities of using robust controllers for a shell-and-tube heat exchanger control were studied, tested and compared by simulations and obtained results are presented in this paper. The heat exchanger was used to pre-heat petroleum by hot water; the controlled output was the measured output temperature of the heated fluid — petroleum, and the control input was the volumetric flow rate of the heating fluid — water. Robust controllers were designed using ℋ2, ℋ∞, ℋ2/ℋ∞ strategies and μ-synthesis. A comparison with the classical PID control demonstrated the superiority of the proposed robust control especially in case when the controlled process is affected by disturbances.

Robust controller design for a heat exchanger using ℋ2, ℋ∞, ℋ2/ℋ∞, and <italic>μ</italic>-synthesis approaches

Slovak University of Technology in Bratislava, Faculty of Chemical and Food Technology, Radlinského 9, 812 37 Bratislava,

Acta Chimica Slovaca

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Robust controller design for a heat exchanger using ℋ, ℋ, ℋ/ℋ, and -synthesis approaches

Possibilities of using robust controllers for a shell-and-tube heat exchanger control were studied, tested and compared by simulations and obtained results are...

Robust controller design for a heat exchanger using ℋ₂, ℋ_∞, ℋ₂/ℋ_∞, and μ-synthesis approaches

Pubblicato online: 08 dic 2016

Pagine: 184 - 193

DOI: https://doi.org/10.1515/acs-2016-0031

Parole chiave
heat exchanger, PID control, ℋ control, ℋ control, -synthesis

© 2016 Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Robust controller design for a heat exchanger using ℋ2, ℋ∞, ℋ2/ℋ∞, and μ-synthesis approaches

Pubblicato online: 08 dic 2016

Pagine: 184 - 193

DOI: https://doi.org/10.1515/acs-2016-0031

Parole chiaveheat exchanger, PID control, ℋ control, ℋ control, -synthesis

© 2016 Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Robust controller design for a heat exchanger using ℋ₂, ℋ_∞, ℋ₂/ℋ_∞, and μ-synthesis approaches

Parole chiave
heat exchanger, PID control, ℋ control, ℋ control, -synthesis