<abstract xmlns="http://www.w3.org/1999/xhtml">

IPv6 is to solve the problem of IPv4 address exhaustion, with the development of the Internet of things, big data and cloud storage and other technologies, these technologies are gradually applied in recent years, the continuous development of new technologies application show that the IPv6 address structure design ideas have some fatal defects. This paper proposed a route to upgrade the original IPv4 by studying on the structure of IPv6 “spliced address”, and point out the defects in the design of IPv6 interface ID and the potential problems such as security holes.
</abstract>

The Shortcomings of Ipv6 and Upgrade of Ipv4

<abstract xmlns="http://www.w3.org/1999/xhtml">

The current global Internet USES the TCP/IP protocol cluster. IP is the network layer protocol and the core protocol in this protocol family. The current version is IPv4 with 32-bit addresses. With the popularity of Internet applications, the limited address space defined by IPv4 has been exhausted. To expand the address space, the Internet Engineering Task Force (IETF) has designed the next generation IP protocol, IPv6, to replace IPv4. IPv6 redefines the address space, using a 128-bit address length that provides almost unlimited addresses. However, with the development and application of the Internet of things, big data and cloud storage, IPv6 has some shortcomings in its address structure design, security and network sovereignty, so it is urgent to develop a new generation or future internet with security and reliability, autonomy and controllable, and it becomes a research hotspot in the world.
This paper developed a new generation Internet (IPV9) datagram by researching the existed IPv4 and IPv6, and it is based on the method of assigning addresses to computers connected to the Internet by full decimal character code which designed by the Chinese Decimal Network Working Group with the leader of Xie Jianping. It is a subsequent version with RFC1606, RFC1607, a new generation of network data structure, it is not the updating of IPv4 [RFC - 791] and IPv6 [RFC - 1883], [RFC - 2464], it is a new vision to demonstration and testing.
</abstract>

Research and Design of Next Generation Internet (IPV9) Datagram

<abstract xmlns="http://www.w3.org/1999/xhtml">

To solve a series of problems caused by address space and information security of contemporary Internet, Chinese scientists have proposed a new generation of network architecture. Since the release of IPv4 RFC791 in 1981, it has become the first widely used Internet of things protocol due to its characteristics of easy implementation and good operability. It constitutes the basic protocol of current Internet technology. However, due to the defects in address classification, address resources are largely wasted. As the scale of the Internet continues to grow, especially the number of addresses used to surge, the address shortage has limited the Internet further development. IPv6 has solved the problem of insufficient IPv4 addresses to some extent, but it is not widely for more than 20 years used because it integrates the information of physical layer and application layer, which confuses the network layer and brings many security risks. Based on the study of IPv4 and IPv6, this paper proposes a new generation network architecture, which is designed from the aspects of addressing model, address writing, address prefix writing and address type. The address structure is compatible with IPv4 and IPv6, so that the previous design results can be retained, fundamentally solve the space address and information security issues, and provide a new solution for the next generation of Internet applications and research.
</abstract>

Design and Research of New Network Address Coding

<abstract xmlns="http://www.w3.org/1999/xhtml">

With the wide application of Internet technology, the number of hosts accessing the Internet has grown rapidly, and addresses will be more and more widely used in other intelligent terminals such as e-commerce logistics codes, space codes, identity codes, and 3D geocodes. The number of existing addresses is no longer sufficient for this development demand. The emergence of IPv6 temporarily alleviated the problem of IP address shortage, and IPv6 did not fully consider the security of data transmission at the beginning of design. Chinese researchers have proposed a new Internet address architecture, that is, method of using whole digital code to assign address for computer, referred to as IPV9. IPV9 extends address capacity; supports more address hierarchies, more addressable nodes, and simpler automatic address configuration. Based on the study of IPv4 and IPv6 address structure, this paper designs the standards of the new generation network address structure, including IPV9 unicast address structure, cluster address structure and multicast address structure, which provides a solid foundation for new generation of Internet research.
</abstract>

Research of New Network Address Structure

<abstract xmlns="http://www.w3.org/1999/xhtml">

Line lasers are of great significance in many fields such as industrial inspection, machine vision, cultural relics identification, mechanical design, and medical oral cavity. The three-dimensional reconstruction of the line laser can accurately obtain the three-dimensional information of the surface of the object, and quickly complete the three-dimensional contour reconstruction of the object to be tested. In the online laser rotation scanning, the object rotates around a certain point, which is a rotation center, and the calibration of the rotation center is the main factor that restricts the accuracy of the three-dimensional contour. At present, the calibration of the center of rotation is mainly obtained by the characteristics of a circle (ball, cylinder, cone, etc.). This paper mainly introduces the basic process of rotating scanning, rotating center, and rotating methods as well as their advantages and disadvantages. First, the basic process of rotating scanning is briefly introduced. Secondly, the definition and content of the rotating center are introduced. Then, the calibration methods of three rotating centers (ellipse fitting method, symmetry method, plane fitting method) are introduced. Finally, the advantages and disadvantages of the three calibration methods and their respective applications are summarized.
</abstract>

Rotation center calibration based on line laser rotating platform

<abstract xmlns="http://www.w3.org/1999/xhtml">

The full decimal method of address assignment for networked computers and intelligent terminals which input into the computer through various input devices of the computer and intelligent terminals is realized, and then, the external address of networked computer and intelligent media stored in the database and the internal arithmetic address are created correspondingly through a variety of transmission media by combination of different computer hardware and software. The new address assignment method can provide sufficient address space for development of Internet in the future, and it also provides enough address for application of various personal information household appliances and logistics in electronic commerce and other entities and personal communication terminals while ensuring multiple levels of address structure. This paper mainly introduces the decimal address allocation algorithm and address format, which provides a solid foundation for the next generation Internet architecture design.
</abstract>

A Full Decimal Method of Address Assignment for Networked Computer

<abstract xmlns="http://www.w3.org/1999/xhtml">

In the 20th century, the emergence of the Internet has completely changed the work and life of human beings around the world. Today, people are increasingly inseparable from network. The Internet has been integrated with the global industry, agriculture, education, science, technology and national defense. The current Internet was originated in the United States. The Internet systems based on IPv4 and IPv6, they are controlled by the United States completely. Computers connected to the Internet are subject to data retention and backup in the United States. Data security is greatly threatened. In addition, due to limitations and loopholes in the design of the Internet, the Internet is subject to many different types of attacks. Internet research which based on security autonomy has received the attention of sovereign countries in the world. This paper mainly introduces the Future Internet system developed by Chinese researchers based on the current research on Internet servers, which is a new generation network system, the research and application of this system will have a profound impact on the world’s Internet.
</abstract>

From Network Security to Network Autonomous

<abstract xmlns="http://www.w3.org/1999/xhtml">

The line structure light three-dimensional reconstruction system is a kind of three-dimensional non-contact measurement system, which has the advantages of high precision, high speed, small damage to objects and strong adaptability. Camera calibration is a major factor that constrains the accuracy of 3D measurement systems. The camera calibration is based on the pinhole imaging model, and through a series of complex calculations, the camera’s internal parameters (focal length, distortion coefficient) and external parameters (rotation matrix and translation vector). The different calibration methods use different calibration targets, which can be divided into 3D calibration targets, 2D calibration targets, and one-dimensional calibration targets according to the characteristics of the calibration targets. This paper mainly discusses: calibration content and significance, calibration methods for different targets and evaluation methods for calibration of different targets. Firstly, the content and significance of calibration are expounded. Then, according to different calibration targets, the calibration algorithm is analyzed. Finally, the calibration algorithm is analyzed and summarized, and the development trends, advantages and disadvantages of different calibration methods are pointed out.
</abstract>

A Survey of Calibration Methods for Traditional Cameras Based on Line Structure Light

<abstract xmlns="http://www.w3.org/1999/xhtml">

Palmprint location is the premise of feature space extraction and feature recognition, the speed and accuracy of palmprint location directly affect the speed and accuracy of palmprint recognition system, and the extraction of contour feature points is the key of palmprint location. The contour of palmprint is extracted by gray morphological gradient; then, based on the analysis of palmprint appearance characteristics, Harris corner is used to extract the key feature points of the image, and the reference coordinate system is established according to the key points to realize the location and segmentation of palmprint.
</abstract>

Research on Harris Corner Detection Method in Palmprint Recognition System

<abstract xmlns="http://www.w3.org/1999/xhtml">

Aiming at the distortion of texture details in Digital Camouflage design, as well as the poor camouflage performance, fast fading and short life of camouflage tent cloth, this paper presents a design method of Digital Camouflage based on target background, develops a camouflage coating with good weather resistance, color difference and spectral reflectance meeting the limited requirements, and realizes the paint printing of camouflage tent cloth. The results show that the digital camouflage pattern designed by this method can be printed on the surface of camouflage tent cloth by coating printing process, which can effectively change the original contour of the target tent, make it better integrate with the surrounding background, reduce the probability of detection, and achieve good camouflage effect.
</abstract>

Research on Digital Camouflage Design and Camouflage Material of Tent Cloth

<abstract xmlns="http://www.w3.org/1999/xhtml">

It is a problem of spectra analysis of flue gas that how to separate and calculate the concentration of different kinds of gas from continuous mixed gas absorption spectrum signal. So based on experimental data, a new iteration of the circular algorithm is put forward on the basis of Lambert-Beer’s law. The algorithm uses different UV-light wavelengths at 190nm-290nm for different characteristics of UV light with different absorption peaks. The iteration is repeated until the concentration difference between adjacent two gases is less than a certain value. It is considered that the elemental gas The exact concentration, and through the programming to achieve the results. it has strong anti-jamming capability and is suitable for practical application of engineering.
</abstract>

The Research of a New Iteration of the Circular Algorithm

<abstract xmlns="http://www.w3.org/1999/xhtml">

In order to improve the security performance of data transmission in the RFID system, the sequence generated by the chaotic map is used to encrypt the data transmitted between the reader and the tag in the RFID. Based on the unpredictability, extreme sensitivity to initial conditions, and pseudo-random characteristics of chaotic sequences, the information of each electronic tag is encrypted with a unique chaotic sequence. The same operation mechanism is used to encrypt and decrypt data, and a security model based on chaotic encryption is established. At the same time, the read/write control mechanism and security issues are explained.
</abstract>

Application of Chaotic Encryption in RFID Data Transmission Security

AHEAD OF PRINT

Volume 9 (2024): Issue 1 (January 2024)

Volume 8 (2023): Issue 4 (December 2023)

Volume 8 (2023): Issue 3 (September 2023)

Volume 8 (2023): Issue 2 (June 2023)

Volume 8 (2023): Issue 1 (January 2023)

Volume 7 (2022): Issue 4 (January 2022)

Volume 7 (2022): Issue 3 (January 2022)

Volume 7 (2022): Issue 2 (January 2022)

Volume 7 (2022): Issue 1 (January 2022)

Volume 6 (2021): Issue 4 (January 2021)

Volume 6 (2021): Issue 3 (January 2021)

Volume 6 (2021): Issue 2 (January 2021)

Volume 6 (2021): Issue 1 (January 2021)

Volume 5 (2020): Issue 4 (January 2020)

Volume 5 (2020): Issue 3 (January 2020)

Volume 5 (2022): Issue 2 (January 2022)

Volume 5 (2020): Issue 1 (January 2020)

Volume 4 (2019): Issue 4 (January 2019)

Volume 4 (2019): Issue 3 (January 2019)

Volume 4 (2019): Issue 2 (January 2019)

Volume 4 (2019): Issue 1 (January 2019)

Volume 3 (2018): Issue 4 (January 2018)

Volume 3 (2018): Issue 3 (January 2018)

Volume 3 (2018): Issue 2 (January 2018)

Volume 3 (2018): Issue 1 (January 2018)

Volume 2 (2017): Issue 4 (January 2017)

Volume 2 (2017): Issue 3 (January 2017)

Volume 2 (2017): Issue 2 (January 2017)

Volume 2 (2017): Issue 1 (January 2017)

Volume 1 (2016): Issue 2 (January 2016)

Volume 1 (2016): Issue 1 (January 2016)

International Journal of Advanced Network, Monitoring and Controls

The International Journal of Advanced Network, Monitoring and Controls (ISSN:2470-8038）is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills, especially in the fields of advanced network, monitoring, sensors and controls. It is also the Journal's objective to promote engineering and technology education.  All papers submitted to the Journal will be blind peer-reviewed. Every paper is reviewed by two Professors and blind. All reviewers are independent of the editorial board. Only original articles will be published.  Open Access Policy  This journal provides immediate open access to its content under the Creative Commons CC BY-NC-ND 4.0 license on the principle that making research freely available to the public supports a greater global exchange of knowledge. Under the CC BY-NC-ND 4.0 license users are free to share the work (copy and redistribute the material in any medium or format), if the contribution is properly attributed and used for non-commercial purposes. The material published in the journal may not be altered or build upon.  Rejection rate: 50%  All submitted papers will be reviewed by more than two expert referees in their relevancy to the call for paper. After refereeing process, all accepted papers will be published and the full text is online available.   The acceptance process is as follows:   First of all, check the paper format and theme, and then entering the technical review process according to the quality standards.   The paper will be submitted to two reviewers for review according to the content of the paper; two blind reviewers will make comments and revisions to the paper, and then give an acceptance or rejection.   ABOUT SOCIETY  Xi'an Technological University has over 20,000 students and is authorized by Chinese government to award Ph.D. degrees. The State and Provincial Joint Engineering Laboratory of Advanced Network and Monitoring Control is located within the School of Computer Science and Engineering, Xi'an Technological University. The Lab.is mainly focused on researches in theoretical researches and practical applications of computing technologies, advanced networks, system simulations, artificial intelligence, automated monitoring and controls.  Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 