<abstract xmlns="http://www.w3.org/1999/xhtml">Hexamethylenetetramine succinate was synthesized and good quality single crystals with the size of 14 mm × 6 mm × 4 mm were grown by the slow evaporation solution growth technique at room temperature. The single crystal XRD revealed that the grown crystal belongs to the monoclinic system with the space group of P21/c. The presence of functional groups in the crystal was identified using FT-IR technique. The optical behavior was examined through UV-Vis-NIR studies. The photoconductivity study exhibited the positive photoconductivity nature of the grown crystal. Microhardness studies revealed the soft nature of the crystal. The nonlinear refractive index (n2), nonlinear absorption coefficient (β) and third order nonlinear optical susceptibility χ(3) of the crystals were measured by Z-scan studies.</abstract>

Growth, spectroscopic, electrical and mechanical studies on hexamethylenetetramine succinate crystal: a new third harmonic generation material

<abstract xmlns="http://www.w3.org/1999/xhtml">Optically transparent single crystals of 2-amino 4-methylpyridinium salicylate were successfully grown by slow evaporation solution growth technique at room temperature. The grown crystal was characterized by various characterization techniques such as single crystal X-ray diffraction, Fourier transform infrared microscopy, optical, dielectric and Z-scan studies. The presence of various functional groups was identified by Fourier transform infrared technique. UV-Vis-NIR studies implied the absence of absorption in the visible region. Dielectric studies were carried out in the frequency range from 50 Hz to 5 MHz. Thermogravimetric/differential thermal analysis and nuclear magnetic resonance spectra studies were also performed for the grown crystal. Nonlinear refractive index, absorption coefficient and third order nonlinear optical susceptibility of the crystals were evaluated by Z-scan studies.</abstract>

Growth, spectral, optical, dielectric and third order nonlinear studies on 2-amino 4-methylpyridinium salicylate single crystals

<abstract xmlns="http://www.w3.org/1999/xhtml">In the present work, with an aim of developing new useful materials, carbon dot-graphene oxide-zinc oxide (CGZ) nanocomplexes were synthesized by the wet chemical method. Structure, morphology and chemical composition of prepared GCZ nanoparticles were determined by carrying out X-ray diffraction, scanning electron microscopy, Fourier transform infrared and energy dispersive X-ray absorption spectral measurements. The strong absorption band observed in the UV region for the prepared samples can be attributed to the band edge absorption. The dielectric parameters, viz. dielectric constant (∈r), dielectric loss (tanδ) and AC electrical conductivity (σ AC) were determined at various temperatures in the range of 30 °C to 150 °C at two different frequencies (100 Hz and 1 kHz). DC conductivity (σDC) measurement was also carried out at various temperatures in the range of 30 °C to 150 °C. In addition, the enhanced photocatalytic activity of CGZ has been explained and the mechanism elucidating the excellent performance of CGZ has been proposed.</abstract>

Department of Nanotechnology, Noorul Islam Centre for Higher Education

Department of Physics, Kamarajar Government Arts College

Studies on new material: carbon dot-graphene oxide-zinc oxide nanocomplex

<abstract xmlns="http://www.w3.org/1999/xhtml">Single crystals of ammonium oxalate monohydrate (AO) were grown using the slow evaporation solution growth technique. The cell parameters obtained from the single crystal diffraction experiments matched with those known earlier showed that the grown crystals were composed of AO. The variation of dielectric constant as a function of frequency shows that the dielectric constant is relatively high in low frequency region and low in the high frequency region. Microhardness study indicates that the grown AO crystal is of a soft nature. The TG and DTA studies reveal that the grown crystal has good thermal stability and can be exploited in various applications up to 100 °C. There is a change in morphology of etch pits on prolonged etching. A very low value of dielectric constant supports that the material can be exploited in photonic and electro-optic devices. Thermal stability of the grown crystal is good.</abstract>

An insight on spectral, microstructural, electrical and mechanical characterization of ammonium oxalate monohydrate crystals

<abstract xmlns="http://www.w3.org/1999/xhtml">The purpose of this work is the study of the correlation between the thickness of tantalum pentoxide thin films and their three-dimensional (3D) micromorphology. The samples were prepared on silicon substrates by electron beam evaporation. The differences in surface structure of the processed and reference samples were investigated. Compositional studies were performed by energy-dispersive X-ray spectroscopy. Stereometric analysis was carried out on the basis of atomic force microscopy (AFM) data, for tantalum pentoxide samples with 20 nm, 40 nm, 60 nm, 80 nm and 100 nm thicknesses. These methods are frequently used in describing experimental data of surface nanomorphology of Ta2O5. The results can be used to validate theoretical models for prediction or correlation of nanotexture surface parameters.</abstract>

Faculty of Electrical Engineering and Communication, Physics Department

The Directorate of Research, Development and Innovation Management (DMCDI)

Stereometric analysis of Ta2O5 thin films

AHEAD OF PRINT

Volume 41 (2023): Issue 4 (December 2023)

Volume 41 (2023): Issue 3 (September 2023)

Volume 41 (2023): Issue 2 (August 2023)

Volume 41 (2023): Issue 1 (March 2023)

Volume 40 (2022): Issue 4 (December 2022)

Volume 40 (2022): Issue 3 (September 2022)

Volume 40 (2022): Issue 2 (August 2022)

Volume 40 (2022): Issue 1 (March 2022)

Volume 39 (2021): Issue 4 (December 2021)

Volume 39 (2021): Issue 3 (September 2021)

Volume 39 (2021): Issue 2 (June 2021)

Volume 39 (2021): Issue 1 (March 2021)

Volume 38 (2020): Issue 4 (December 2020)

Volume 38 (2020): Issue 3 (September 2020)

Volume 38 (2020): Issue 2 (June 2020)

Volume 38 (2020): Issue 1 (March 2020)

Volume 37 (2019): Issue 4 (December 2019)

Volume 37 (2019): Issue 3 (September 2019)

Volume 37 (2019): Issue 2 (June 2019)

Volume 37 (2019): Issue 1 (March 2019)

Volume 36 (2018): Issue 4 (December 2018)

Volume 36 (2018): Issue 3 (September 2018)

Volume 36 (2018): Issue 2 (June 2018)

Volume 36 (2018): Issue 1 (March 2018)

Volume 35 (2017): Issue 4 (December 2017)

Volume 35 (2017): Issue 3 (October 2017)

Volume 35 (2017): Issue 2 (July 2017)

Volume 35 (2017): Issue 1 (March 2017)

Volume 34 (2016): Issue 4 (December 2016)

Volume 34 (2016): Issue 3 (September 2016)

Volume 34 (2016): Issue 2 (June 2016)

Volume 34 (2016): Issue 1 (March 2016)

Volume 33 (2015): Issue 4 (December 2015)

Volume 33 (2015): Issue 3 (September 2015)

Volume 33 (2015): Issue 2 (June 2015)

Volume 33 (2015): Issue 1 (March 2015)

Volume 32 (2014): Issue 4 (December 2014)

Volume 32 (2014): Issue 3 (September 2014)

Volume 32 (2014): Issue 2 (June 2014)

Volume 32 (2014): Issue 1 (January 2014)

Volume 31 (2013): Issue 4 (October 2013)

Volume 31 (2013): Issue 3 (August 2013)

Volume 31 (2013): Issue 2 (April 2013)

Volume 31 (2013): Issue 1 (January 2013)

Volume 30 (2012): Issue 4 (December 2012)

Volume 30 (2012): Issue 3 (September 2012)

Volume 30 (2012): Issue 2 (June 2012)

Volume 30 (2012): Issue 1 (March 2012)

Volume 29 (2011): Issue 4 (December 2011)

Volume 29 (2011): Issue 3 (September 2011)

Volume 29 (2011): Issue 2 (June 2011)

Volume 29 (2011): Issue 1 (March 2011)

Materials Science-Poland

 Material Sciences-Poland online ISSN: 2083-134X (est. in 1974 as Materials Science, ISSN 0137-1339) is an interdisciplinary journal devoted to experimental research into results on the relationships between structure, processing, properties, technology, and uses of materials. Original research articles and review can be only submitted The review process for submitted papers is a blind peer review.  The total publication fee is 500 EUR.The payment should be done after acceptance and before publishing the manuscript to the following bank account in POLAND:PL60 1090 2402 0000 0001 4890 0917 SWIFT (BIC): WBKPPLPPXXX.Title: Materials Science-Poland, No. of manuscript. Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process.  BACK ISSUES: Back issues papers from vol. 20 / 2002 are available at: www.materialsscience.pwr.wroc.pl/index.php?id=5 

Materials Science-Poland

AHEAD OF PRINT

Growth, spectroscopic, electrical and mechanical studies on hexamethylenetetramine succinate crystal: a new third harmonic generation material

Growth, spectral, optical, dielectric and third order nonlinear studies on 2-amino 4-methylpyridinium salicylate single crystals

Studies on new material: carbon dot-graphene oxide-zinc oxide nanocomplex

An insight on spectral, microstructural, electrical and mechanical characterization of ammonium oxalate monohydrate crystals

Stereometric analysis of Ta₂O₅ thin films

Chercher

Tous les volumes et éditions dans cette revue