<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Micro-extrusion is the process of obtaining microtubes with either simple or complex cross-sections which are used for the high-precision transport and protection of various of media. Through this process, it is possible to create tubing with interior diameters and wall thicknesses as small as 0.1 mm and 0.05 mm respectively. Micro-extruded tubing such as micro catheters and peripheral intravenous cannulas are employed in microfluidics, paediatrics and micro-analytics. This article presents the results of granulometric tests of micropellets produced by micro-extrusion with cold pelletizing and results of tensile strength tests of microrods of different diameters. The trials were performed using a standard twin-screw extruder and low-density polyethylene.</p></abstract>

Micro-extrusion is the process of obtaining microtubes with either simple or complex cross-sections which are used for the high-precision transport and protection of various of media. Through this process, it is possible to create tubing with interior diameters and wall thicknesses as small as 0.1 mm and 0.05 mm respectively. Micro-extruded tubing such as micro catheters and peripheral intravenous cannulas are employed in microfluidics, paediatrics and micro-analytics. This article presents the results of granulometric tests of micropellets produced by micro-extrusion with cold pelletizing and results of tensile strength tests of microrods of different diameters. The trials were performed using a standard twin-screw extruder and low-density polyethylene.

The production and properties of micro-extruded low-density polyethylene microtubes

Department of Polymer Processing, Faculty of Mechanical Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Micro-extrusion is the process of obtaining microtubes with either simple or complex cross-sections which are used for the high-precision transport and...

The production and properties of micro-extruded low-density polyethylene microtubes

Publié en ligne: 23 mai 2020

Pages: 155 - 166

DOI: https://doi.org/10.4467/2353737XCT.17.026.6219

Mots clés
polymer micro-extrusion, low-density polyethylene, micropellets

© 2018 Karolina Głogowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The production and properties of micro-extruded low-density polyethylene microtubes

Publié en ligne: 23 mai 2020

Pages: 155 - 166

DOI: https://doi.org/10.4467/2353737XCT.17.026.6219

Mots cléspolymer micro-extrusion, low-density polyethylene, micropellets

© 2018 Karolina Głogowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Mots clés
polymer micro-extrusion, low-density polyethylene, micropellets