1. bookVolume 36 (2014): Edition 3 (September 2014)
Détails du magazine
License
Format
Magazine
eISSN
2083-831X
ISSN
0137-6365
Première parution
09 Nov 2012
Périodicité
4 fois par an
Langues
Anglais
Accès libre

The Analysis of Soil Resistance During Screw Displacement Pile Installation

Publié en ligne: 28 Feb 2015
Volume & Edition: Volume 36 (2014) - Edition 3 (September 2014)
Pages: 49 - 56
Détails du magazine
License
Format
Magazine
eISSN
2083-831X
ISSN
0137-6365
Première parution
09 Nov 2012
Périodicité
4 fois par an
Langues
Anglais

[1] BUSTAMANTE M., GIANESELLI L., Design of auger displacement piles from in situ tests, Proceedings of International Geotechnical Seminar on Deep Foundations on Bored and Auger Piles, BAP II, Balkema, Rotterdam 1993, pp. 21-34.Search in Google Scholar

[2] BUSTAMANTE M., GIANESELLI L., Installation parameters and capacity of screwed piles, Proceedings of International Geotechnical Seminar on Deep Foundations on Bored and Auger Piles, BAP III, Balkema, Rotterdam 1998, pp. 95-108.10.1201/9781003078517-12Search in Google Scholar

[3] KRASIŇSKI A., Model tests of screwed piles, Proc. of the XIV Danube-European Conf. on Geotechnical Engineering, Bratislava, Slovak Republic, June 2-4, 2010, 237+CD.Search in Google Scholar

[4] KRASIŇSKI A., Field tests of screw displacement piles and columns SDP and SDC, Drogi i Mosty, 2011a, No. 1-2, pp. 21-58 (in Polish).Search in Google Scholar

[5] KRASIŇSKI A., Results of field tests of screw displacement pile and columns, Inźynieria Morska i Geotechnika, 2011b, No. 6, pp. 510-530 (in Polish).Search in Google Scholar

[6] KRASIŇSKI A., Bearing capacity and interaction with soil of screw displacement piles, Final report of research project No. N N506 432936 for the Polish Ministry of Science and Higher Education, Gdansk (in Polish, not published), 2011c.Search in Google Scholar

[7] KRASIŇSKI A., Proposal for calculating the bearing capacity of screw displacement piles in non-cohesive soils based on CPT results, Studia Geotechnica et Mechanica, 2012, Vol. XXXIV, No. 4, pp. 41-51.10.2478/sgm041204Search in Google Scholar

[8] MAERTENS J., HUYBRECHTS N., Belgian screw pile technology. Design and recent developments, Swets & Zeitlinger B.V., Lisse, The Netherlands, 2003, p. 372.Search in Google Scholar

[9] NESMITH W.M., Static capacity analysis of augered, pressure- injected displacement piles, Proc. of the Int. Deep Foundation Congress 2002, Geotechnical Special Publication, 2002, No. 116, Vol. 2, ASCE, pp. 1174-1186.10.1061/40601(256)84Search in Google Scholar

[10] NESMITH W.M., Installation effort as an indicator of displacement screw pile capacity, Deep Foundation on Bored and Auger Piles, BAP IV, Van Impe (ed.), Millpress, Rotterdam 2003, pp. 177-181.Search in Google Scholar

Articles recommandés par Trend MD

Planifiez votre conférence à distance avec Sciendo