This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Al-Sudani, J.A. (2017): Real-time monitoring of mechanical specific energy and bit wear using control engineering systems. Journal of Petroleum Science and Engineering, 149, pp. 171–182, DOI: 10.1016/j.petrol.2016.10.038.Al-SudaniJ.A.2017Real-time monitoring of mechanical specific energy and bit wear using control engineering systemsJournal of Petroleum Science and Engineering14917118210.1016/j.petrol.2016.10.038Open DOISearch in Google Scholar
Bingham, M.G. (1965): A New Approach to Interpreting Rock Drillability. Petroleum Publishing Co.: Tulsa, OK, USA, 93 p.BinghamM.G.1965A New Approach to Interpreting Rock DrillabilityPetroleum Publishing Co.Tulsa, OK, USA93Search in Google Scholar
Cheatham, J.B. (1958): An analytical study of rock penetration by a single bit tooth. In: Proceedings of the 8th Drilling and Blasting Symposium, Minnesota, MN, USA.CheathamJ.B.1958An analytical study of rock penetration by a single bit toothIn:Proceedings of the 8th Drilling and Blasting SymposiumMinnesota, MN, USASearch in Google Scholar
Dagrain, F., Lamine, E., Delwiche, R., Golard, N. (2013): Characterization of the performances of small diameter drill bits for the optimization of the drilling parameters. In: Proceedings of the 2nd International Conference on Stone and Concrete Machining (ICSCM), Dortmund, Germany.DagrainF.LamineE.DelwicheR.GolardN.2013Characterization of the performances of small diameter drill bits for the optimization of the drilling parametersIn:Proceedings of the 2nd International Conference on Stone and Concrete Machining (ICSCM)Dortmund, GermanySearch in Google Scholar
Dutta, P.K. (1972): A theory of percussive drill bit penetration. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 9, pp. 543–567, DOI: 10.1016/0148-9062(72)90044-7.DuttaP.K.1972A theory of percussive drill bit penetrationInternational Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts954356710.1016/0148-9062(72)90044-7Open DOISearch in Google Scholar
Eremin, E.N., Yurov, V.M., Guchenko, S.A., Laurynas, V.C., Kasymov, S.S. (2016): Antifriction Superhard Coatings for Drill Bits and Boring Cutters. Procedia Engineering, 152, pp. 608–612, DOI: 10.1016/j.proeng.2016.07.663.EreminE.N.YurovV.M.GuchenkoS.A.LaurynasV.C.KasymovS.S.2016Antifriction Superhard Coatings for Drill Bits and Boring CuttersProcedia Engineering15260861210.1016/j.proeng.2016.07.663Open DOISearch in Google Scholar
Evans, I., Murrell, S. (1962): Wedge penetration into coal. Colliery Engineering, 39, 11.EvansI.MurrellS.1962Wedge penetration into coalColliery Engineering391110.1016/B978-1-4831-9633-6.50014-1Search in Google Scholar
He, W., Chen, Y., He, J., Xiong, W., Tang, T., OuYang, H. (2016): Spherical contact mechanical analysis of roller cone drill bits journal bearing. Petroleum, 2, pp. 208–214, DOI: 10.1016/j.petlm.2016.03.002.HeW.ChenY.HeJ.XiongW.TangT.OuYangH.2016Spherical contact mechanical analysis of roller cone drill bits journal bearingPetroleum220821410.1016/j.petlm.2016.03.002Open DOISearch in Google Scholar
Jones, H.G., Norgren, S.M., Kritikos, M., Mingard, K.P., Gee, M.G. (2017): Examination of wear damage to rock-mining hardmetal drill bits. International Journal of Refractory Metals and Hard Materials, 66, pp. 1–10, DOI: 10.1016/j.ijrmhm.2017.01.013.JonesH.G.NorgrenS.M.KritikosM.MingardK.P.GeeM.G.2017Examination of wear damage to rock-mining hardmetal drill bitsInternational Journal of Refractory Metals and Hard Materials6611010.1016/j.ijrmhm.2017.01.013Open DOISearch in Google Scholar
Karasawa, H., Ohno, T., Miyazaki, K., Eko, A. (2016): Experimental results on the effect of Bit wear on torque response. International Journal of Rock Mechanics and Mining Sciences, 84, pp. 1–9, DOI: 10.1016/j.ijrmms.2016.01.013.KarasawaH.OhnoT.MiyazakiK.EkoA.2016Experimental results on the effect of Bit wear on torque responseInternational Journal of Rock Mechanics and Mining Sciences841910.1016/j.ijrmms.2016.01.013Open DOISearch in Google Scholar
Ma, D.K., Yang, S.L. (1985): Kinematics of the Cone Bit. Society of Petroleum Engineers Journal, 25, pp. 321–329, DOI: 10.2118/10563-PA.MaD.K.YangS.L.1985Kinematics of the Cone BitSociety of Petroleum Engineers Journal2532132910.2118/10563-PAOpen DOISearch in Google Scholar
Maurer, W.C. (1965): Bit-Tooth Penetration Under Simulated Borehole Conditions. Journal of Petroleum Technology, 17, pp. 1433–1442, DOI: 10.2118/1260-PA.MaurerW.C.1965Bit-Tooth Penetration Under Simulated Borehole ConditionsJournal of Petroleum Technology171433144210.2118/1260-PAOpen DOISearch in Google Scholar
Naganawa, S. (2005): Dynamics modeling of roller cone bit axial vibration. Journal of the Japanese Association for Petroleum Technology, 70, pp. 333–346, DOI: 10.3720/japt.70.333.NaganawaS.2005Dynamics modeling of roller cone bit axial vibrationJournal of the Japanese Association for Petroleum Technology7033334610.3720/japt.70.333Open DOISearch in Google Scholar
Naganawa, S. (2012): Feasibility study on rollercone bit wear detection from axial bit vibration. Journal of Petroleum Science and Engineering, 82–83, pp. 140–150, DOI: 10.1016/j.petrol.2012.01.014.NaganawaS.2012Feasibility study on rollercone bit wear detection from axial bit vibrationJournal of Petroleum Science and Engineering82–8314015010.1016/j.petrol.2012.01.014Open DOISearch in Google Scholar
Njobuenwu, D.O., Wobo, C.A. (2007): Effect of drilled solids on drilling rate and performance. Journal of Petroleum Science and Engineering, 55, pp. 271–276, DOI: 10.1016/j.petrol.2006.08.012.NjobuenwuD.O.WoboC.A.2007Effect of drilled solids on drilling rate and performanceJournal of Petroleum Science and Engineering5527127610.1016/j.petrol.2006.08.012Open DOISearch in Google Scholar
Olsson, M., Yvell, K., Heinrichs, J., Bengtsson, M., Jacobson, S. (2017): Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling. Wear, 388–389, pp. 81–92, DOI: 10.1016/j.wear.2017.03.004.OlssonM.YvellK.HeinrichsJ.BengtssonM.JacobsonS.2017Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drillingWear388–389819210.1016/j.wear.2017.03.004Open DOISearch in Google Scholar
Paul, B., Sikarskie, D.L. (1965): A preliminary model for wedge penetration in brittle materials. Transactions of the American Institute of Mining Engineers, 232, pp. 373–383.PaulB.SikarskieD.L.1965A preliminary model for wedge penetration in brittle materialsTransactions of the American Institute of Mining Engineers232373383Search in Google Scholar
Warren, T.M. (1981): Drilling Model for Soft-Formation Bits. Journal of Petroleum Technology, 33, pp. 963–970, DOI: 10.2118/8438-PA.WarrenT.M.1981Drilling Model for Soft-Formation BitsJournal of Petroleum Technology3396397010.2118/8438-PAOpen DOISearch in Google Scholar
Warren, T.M. (1987): Penetration Rate Performance of Roller Cone Bits. Society of Petroleum Engineers, 2, pp. 9–18, DOI: 10.2118/13259-PA.WarrenT.M.1987Penetration Rate Performance of Roller Cone BitsSociety of Petroleum Engineers291810.2118/13259-PAOpen DOISearch in Google Scholar
Zhao, J., Zhang, G., Xu, Y., Wang, R., Zhou, W., Yang, D. (2018): Experimental and theoretical evaluation of solid particle erosion in an internal flow passage within a drilling bit. Journal of Petroleum Science and Engineering, 160, pp. 582–596, DOI: 10.1016/j.petrol.2017.10.068.ZhaoJ.ZhangG.XuY.WangR.ZhouW.YangD.2018Experimental and theoretical evaluation of solid particle erosion in an internal flow passage within a drilling bitJournal of Petroleum Science and Engineering16058259610.1016/j.petrol.2017.10.068Open DOISearch in Google Scholar
Hareland, G., Wu, A., Rashidi, B.A. (2010): New Drilling Rate Model for Tricone Bit and Its Application to Predict Rock Compressive Strength. In: 44th US Rock Mechanic Symposium and 5th U.S.-Canada Rock Mechanics Symposium, Salt Lake City, UT, USA.HarelandG.WuA.RashidiB.A.2010New Drilling Rate Model for Tricone Bit and Its Application to Predict Rock Compressive StrengthIn:44th US Rock Mechanic Symposium and 5th U.S.-Canada Rock Mechanics SymposiumSalt Lake City, UT, USASearch in Google Scholar
Rashidi, B., Hareland, G., Wu, Z. (2015): Performance, simulation and field application modeling of rollercone bits. Journal of Petroleum Science and Engineering, 133, pp. 507–517, DOI: 10.1016/j.petrol.2015.06.003.RashidiB.HarelandG.WuZ.2015Performance, simulation and field application modeling of rollercone bitsJournal of Petroleum Science and Engineering13350751710.1016/j.petrol.2015.06.003Open DOISearch in Google Scholar
Bourgoyne, A.T., Young, F.S. (1974): A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure Detection. Society of Petroleum Engineers Journal, 14, pp. 371–384, DOI: 10.2118/4238-PA.BourgoyneA.T.YoungF.S.1974A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure DetectionSociety of Petroleum Engineers Journal1437138410.2118/4238-PAOpen DOISearch in Google Scholar
Bourgoyne, A.T., Millheim, K.K., Chenevert, M.E., Young, F.S. (1991): Rotary Drilling Bits. In: Applied Drilling Engineering. SPE: Richardson, TX, USA, pp. 190–245.BourgoyneA.T.MillheimK.K.ChenevertM.E.YoungF.S.1991Rotary Drilling BitsIn:Applied Drilling EngineeringSPERichardson, TX, USA19024510.2118/9781555630010-05Search in Google Scholar
Totten, G.E. (2006): Steel Heat Treatment: Metallurgy and Technologies, 2nd ed. CRC Press: Boca Raton, Florida, USA, 848 p.TottenG.E.2006Steel Heat Treatment: Metallurgy and Technologies2nd edCRC PressBoca Raton, Florida, USA84810.1201/NOF0849384523Search in Google Scholar