Characterisation of the Wear of the Roller Cone Drill Bit Caused by Improperly Chosen Drilling Regime

[1] Al-Sudani, J.A. (2017): Real-time monitoring of mechanical specific energy and bit wear using control engineering systems. Journal of Petroleum Science and Engineering, 149, pp. 171–182, DOI: 10.1016/j.petrol.2016.10.038. Al-SudaniJ.A. 2017 Real-time monitoring of mechanical specific energy and bit wear using control engineering systems Journal of Petroleum Science and Engineering 149 171 182 10.1016/j.petrol.2016.10.038 Open DOISearch in Google Scholar

[2] Bingham, M.G. (1965): A New Approach to Interpreting Rock Drillability. Petroleum Publishing Co.: Tulsa, OK, USA, 93 p. BinghamM.G. 1965 A New Approach to Interpreting Rock Drillability Petroleum Publishing Co. Tulsa, OK, USA 93 Search in Google Scholar

[3] Cheatham, J.B. (1958): An analytical study of rock penetration by a single bit tooth. In: Proceedings of the 8th Drilling and Blasting Symposium, Minnesota, MN, USA. CheathamJ.B. 1958 An analytical study of rock penetration by a single bit tooth In: Proceedings of the 8th Drilling and Blasting Symposium Minnesota, MN, USA Search in Google Scholar

[4] Dagrain, F., Lamine, E., Delwiche, R., Golard, N. (2013): Characterization of the performances of small diameter drill bits for the optimization of the drilling parameters. In: Proceedings of the 2nd International Conference on Stone and Concrete Machining (ICSCM), Dortmund, Germany. DagrainF. LamineE. DelwicheR. GolardN. 2013 Characterization of the performances of small diameter drill bits for the optimization of the drilling parameters In: Proceedings of the 2nd International Conference on Stone and Concrete Machining (ICSCM) Dortmund, Germany Search in Google Scholar

[5] Dutta, P.K. (1972): A theory of percussive drill bit penetration. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 9, pp. 543–567, DOI: 10.1016/0148-9062(72)90044-7. DuttaP.K. 1972 A theory of percussive drill bit penetration International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 9 543 567 10.1016/0148-9062(72)90044-7 Open DOISearch in Google Scholar

[6] Eremin, E.N., Yurov, V.M., Guchenko, S.A., Laurynas, V.C., Kasymov, S.S. (2016): Antifriction Superhard Coatings for Drill Bits and Boring Cutters. Procedia Engineering, 152, pp. 608–612, DOI: 10.1016/j.proeng.2016.07.663. EreminE.N. YurovV.M. GuchenkoS.A. LaurynasV.C. KasymovS.S. 2016 Antifriction Superhard Coatings for Drill Bits and Boring Cutters Procedia Engineering 152 608 612 10.1016/j.proeng.2016.07.663 Open DOISearch in Google Scholar

[7] Evans, I., Murrell, S. (1962): Wedge penetration into coal. Colliery Engineering, 39, 11. EvansI. MurrellS. 1962 Wedge penetration into coal Colliery Engineering 39 11 10.1016/B978-1-4831-9633-6.50014-1 Search in Google Scholar

[8] He, W., Chen, Y., He, J., Xiong, W., Tang, T., OuYang, H. (2016): Spherical contact mechanical analysis of roller cone drill bits journal bearing. Petroleum, 2, pp. 208–214, DOI: 10.1016/j.petlm.2016.03.002. HeW. ChenY. HeJ. XiongW. TangT. OuYangH. 2016 Spherical contact mechanical analysis of roller cone drill bits journal bearing Petroleum 2 208 214 10.1016/j.petlm.2016.03.002 Open DOISearch in Google Scholar

[9] Jones, H.G., Norgren, S.M., Kritikos, M., Mingard, K.P., Gee, M.G. (2017): Examination of wear damage to rock-mining hardmetal drill bits. International Journal of Refractory Metals and Hard Materials, 66, pp. 1–10, DOI: 10.1016/j.ijrmhm.2017.01.013. JonesH.G. NorgrenS.M. KritikosM. MingardK.P. GeeM.G. 2017 Examination of wear damage to rock-mining hardmetal drill bits International Journal of Refractory Metals and Hard Materials 66 1 10 10.1016/j.ijrmhm.2017.01.013 Open DOISearch in Google Scholar

[10] Karasawa, H., Ohno, T., Miyazaki, K., Eko, A. (2016): Experimental results on the effect of Bit wear on torque response. International Journal of Rock Mechanics and Mining Sciences, 84, pp. 1–9, DOI: 10.1016/j.ijrmms.2016.01.013. KarasawaH. OhnoT. MiyazakiK. EkoA. 2016 Experimental results on the effect of Bit wear on torque response International Journal of Rock Mechanics and Mining Sciences 84 1 9 10.1016/j.ijrmms.2016.01.013 Open DOISearch in Google Scholar

[11] Ma, D.K., Yang, S.L. (1985): Kinematics of the Cone Bit. Society of Petroleum Engineers Journal, 25, pp. 321–329, DOI: 10.2118/10563-PA. MaD.K. YangS.L. 1985 Kinematics of the Cone Bit Society of Petroleum Engineers Journal 25 321 329 10.2118/10563-PA Open DOISearch in Google Scholar

[12] Maurer, W.C. (1965): Bit-Tooth Penetration Under Simulated Borehole Conditions. Journal of Petroleum Technology, 17, pp. 1433–1442, DOI: 10.2118/1260-PA. MaurerW.C. 1965 Bit-Tooth Penetration Under Simulated Borehole Conditions Journal of Petroleum Technology 17 1433 1442 10.2118/1260-PA Open DOISearch in Google Scholar

[13] Naganawa, S. (2005): Dynamics modeling of roller cone bit axial vibration. Journal of the Japanese Association for Petroleum Technology, 70, pp. 333–346, DOI: 10.3720/japt.70.333. NaganawaS. 2005 Dynamics modeling of roller cone bit axial vibration Journal of the Japanese Association for Petroleum Technology 70 333 346 10.3720/japt.70.333 Open DOISearch in Google Scholar

[14] Naganawa, S. (2012): Feasibility study on rollercone bit wear detection from axial bit vibration. Journal of Petroleum Science and Engineering, 82–83, pp. 140–150, DOI: 10.1016/j.petrol.2012.01.014. NaganawaS. 2012 Feasibility study on rollercone bit wear detection from axial bit vibration Journal of Petroleum Science and Engineering 82–83 140 150 10.1016/j.petrol.2012.01.014 Open DOISearch in Google Scholar

[15] Njobuenwu, D.O., Wobo, C.A. (2007): Effect of drilled solids on drilling rate and performance. Journal of Petroleum Science and Engineering, 55, pp. 271–276, DOI: 10.1016/j.petrol.2006.08.012. NjobuenwuD.O. WoboC.A. 2007 Effect of drilled solids on drilling rate and performance Journal of Petroleum Science and Engineering 55 271 276 10.1016/j.petrol.2006.08.012 Open DOISearch in Google Scholar

[16] Olsson, M., Yvell, K., Heinrichs, J., Bengtsson, M., Jacobson, S. (2017): Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling. Wear, 388–389, pp. 81–92, DOI: 10.1016/j.wear.2017.03.004. OlssonM. YvellK. HeinrichsJ. BengtssonM. JacobsonS. 2017 Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling Wear 388–389 81 92 10.1016/j.wear.2017.03.004 Open DOISearch in Google Scholar

[17] Paul, B., Sikarskie, D.L. (1965): A preliminary model for wedge penetration in brittle materials. Transactions of the American Institute of Mining Engineers, 232, pp. 373–383. PaulB. SikarskieD.L. 1965 A preliminary model for wedge penetration in brittle materials Transactions of the American Institute of Mining Engineers 232 373 383 Search in Google Scholar

[18] Warren, T.M. (1981): Drilling Model for Soft-Formation Bits. Journal of Petroleum Technology, 33, pp. 963–970, DOI: 10.2118/8438-PA. WarrenT.M. 1981 Drilling Model for Soft-Formation Bits Journal of Petroleum Technology 33 963 970 10.2118/8438-PA Open DOISearch in Google Scholar

[19] Warren, T.M. (1987): Penetration Rate Performance of Roller Cone Bits. Society of Petroleum Engineers, 2, pp. 9–18, DOI: 10.2118/13259-PA. WarrenT.M. 1987 Penetration Rate Performance of Roller Cone Bits Society of Petroleum Engineers 2 9 18 10.2118/13259-PA Open DOISearch in Google Scholar

[20] Zhao, J., Zhang, G., Xu, Y., Wang, R., Zhou, W., Yang, D. (2018): Experimental and theoretical evaluation of solid particle erosion in an internal flow passage within a drilling bit. Journal of Petroleum Science and Engineering, 160, pp. 582–596, DOI: 10.1016/j.petrol.2017.10.068. ZhaoJ. ZhangG. XuY. WangR. ZhouW. YangD. 2018 Experimental and theoretical evaluation of solid particle erosion in an internal flow passage within a drilling bit Journal of Petroleum Science and Engineering 160 582 596 10.1016/j.petrol.2017.10.068 Open DOISearch in Google Scholar

[21] Hareland, G., Wu, A., Rashidi, B.A. (2010): New Drilling Rate Model for Tricone Bit and Its Application to Predict Rock Compressive Strength. In: 44th US Rock Mechanic Symposium and 5th U.S.-Canada Rock Mechanics Symposium, Salt Lake City, UT, USA. HarelandG. WuA. RashidiB.A. 2010 New Drilling Rate Model for Tricone Bit and Its Application to Predict Rock Compressive Strength In: 44th US Rock Mechanic Symposium and 5th U.S.-Canada Rock Mechanics Symposium Salt Lake City, UT, USA Search in Google Scholar

[22] Rashidi, B., Hareland, G., Wu, Z. (2015): Performance, simulation and field application modeling of rollercone bits. Journal of Petroleum Science and Engineering, 133, pp. 507–517, DOI: 10.1016/j.petrol.2015.06.003. RashidiB. HarelandG. WuZ. 2015 Performance, simulation and field application modeling of rollercone bits Journal of Petroleum Science and Engineering 133 507 517 10.1016/j.petrol.2015.06.003 Open DOISearch in Google Scholar

[23] Bourgoyne, A.T., Young, F.S. (1974): A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure Detection. Society of Petroleum Engineers Journal, 14, pp. 371–384, DOI: 10.2118/4238-PA. BourgoyneA.T. YoungF.S. 1974 A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure Detection Society of Petroleum Engineers Journal 14 371 384 10.2118/4238-PA Open DOISearch in Google Scholar

[24] Bourgoyne, A.T., Millheim, K.K., Chenevert, M.E., Young, F.S. (1991): Rotary Drilling Bits. In: Applied Drilling Engineering. SPE: Richardson, TX, USA, pp. 190–245. BourgoyneA.T. MillheimK.K. ChenevertM.E. YoungF.S. 1991 Rotary Drilling Bits In: Applied Drilling Engineering SPE Richardson, TX, USA 190 245 10.2118/9781555630010-05 Search in Google Scholar

[25] Totten, G.E. (2006): Steel Heat Treatment: Metallurgy and Technologies, 2nd ed. CRC Press: Boca Raton, Florida, USA, 848 p. TottenG.E. 2006 Steel Heat Treatment: Metallurgy and Technologies 2nd ed CRC Press Boca Raton, Florida, USA 848 10.1201/NOF0849384523 Search in Google Scholar