1. bookVolume 66 (2022): Edition 1 (July 2022)
Détails du magazine
Première parution
30 Sep 2018
2 fois par an
Accès libre

Grading Material Properties in 3D Printed Concrete Structures

Publié en ligne: 11 Jul 2022
Volume & Edition: Volume 66 (2022) - Edition 1 (July 2022)
Pages: 73 - 89
Reçu: 31 Mar 2022
Accepté: 23 Jun 2022
Détails du magazine
Première parution
30 Sep 2018
2 fois par an

1. Silfwerbrand, J, “Concrete and Sustainability – Some Thoughts from a Swedish Horizon”, Nordic Concrete Research, Vol. 63, Dec. 2020, pp. 79–87.10.2478/ncr-2020-0019 Search in Google Scholar

2. Wangler, T, Roussel, N, Bos, F. P, Salet, T. A. M, and Flatt, R. J, “Digital Concrete: A Review”, Cement and Concrete Research, Vol. 123, Sept. 2019, Article 105780.10.1016/j.cemconres.2019.105780 Search in Google Scholar

3. Boggarapu, V, Gujjala, R, Ojha, S, Acharya, S, Venkateswara babu, P, Chowdary, S, and kumar Gara, D, “State of the art in functionally graded materials”, Composite Structures, Vol. 262, Apr. 2021, Article 113596.10.1016/j.compstruct.2021.113596 Search in Google Scholar

4. Westerlind, H, “Choreographing Flow: A Study in Concrete Deposition”. PhD thesis, KTH Royal Institute of Technology, Dept. of Architecture, 2021.10.2307/j.ctv13xprf6.39 Search in Google Scholar

5. Torelli, G, Fernández, M. G, and Lees, J. M, “Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements”, Construction and Building Materials, Vol. 242, May 2020, Article 118040.10.1016/j.conbuildmat.2020.118040 Search in Google Scholar

6. Zhang, C, Chen, F, Huang, Z, Jia, M, Chen, G, Ye, Y, Lin, Y, Liu, W, Chen, B, Shen, Q, Zhang, L, and Lavernia, E. J, “Additive manufacturing of functionally graded materials: A review”, Materials Science and Engineering, Vol. 764, Sept. 2019, Article 138209.10.1016/j.msea.2019.138209 Search in Google Scholar

7. Bever, M. B and Duwez, P. E, “Gradients in composite materials”, Materials Science and Engineering, Vol. 10, Jan. 1972, pp. 1-8.10.1016/0025-5416(72)90059-6 Search in Google Scholar

8. Li, S, Xin, Y, Yu, Y, and Wang, Y, “Design for additive manufacturing from a force-flow perspective”, Materials & Design, Vol. 204, June 2021, Article 109664.10.1016/j.matdes.2021.109664 Search in Google Scholar

9. Nogata, F and Takahashi, H, “Intelligent functionally graded material: Bamboo”, Composites Engineering, Vol. 5, Jan. 1995, pp. 743–751.10.1016/0961-9526(95)00037-N Search in Google Scholar

10. Kawasaki, A and Watanabe, R, “Concept and P/M fabrication of functionally gradient materials”, Ceramics International, Vol. 23, Jan. 1997, pp. 73–83.10.1016/0272-8842(95)00143-3 Search in Google Scholar

11. Naebe, M and Shirvanimoghaddam, K, “Functionally graded materials: A review of fabrication and properties”, Applied Materials Today, Vol. 5, Dec. 2016, pp. 223–245.10.1016/j.apmt.2016.10.001 Search in Google Scholar

12. Kieback, B, Neubrand, A, and Riedel, H, “Processing techniques for functionally graded materials”, Materials Science and Engineering: A, Vol. 362, Dec. 2003, pp. 81–106.10.1016/S0921-5093(03)00578-1 Search in Google Scholar

13. El-Galy, I. M, Saleh, B. I, and Ahmed, M. H, “Functionally graded materials classifications and development trends from industrial point of view”, SN Applied Sciences, Vol. 1, Oct. 2019, p. 1378.10.1007/s42452-019-1413-4 Search in Google Scholar

14. Mahmoud, D and Elbestawi, M. A, “Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review”, Journal of Manufacturing and Materials Processing, Vol. 1, Dec. 2017, p. 13.10.3390/jmmp1020013 Search in Google Scholar

15. “Standard - Additive manufacturing – General principles – Terminology ISO/ASTM 52900:2015.” Search in Google Scholar

16. Hilmas, G. E, Lombardi, J. L, and Hoffman, R. A, “Advances in the Fabrication of Functionally Graded Materials Using Extrusion Freeform Fabrication”, Functionally Graded Materials 1996 (Shiota, I and Miyamoto, Y, eds.), Amsterdam: Elsevier Science B.V., Jan. 1997, pp. 319–324.10.1016/B978-044482548-3/50053-6 Search in Google Scholar

17. Loh, G. H, Pei, E, Harrison, D, and Monzón, M. D, “An overview of functionally graded additive manufacturing”, Additive Manufacturing, Vol. 23, pp. 34–44, Oct. 2018.10.1016/j.addma.2018.06.023 Search in Google Scholar

18. Oxman, N, “Methods and Apparatus for Variable Property Rapid Prototyping”, Apr. 2011.10.1080/17452759.2011.558588 Search in Google Scholar

19. Vaezi, M, Chianrabutra, S, Mellor, B, and Yang, S, “Multiple material additive manufacturing – Part 1: A review”, Virtual and Physical Prototyping, Vol. 8, Mar. 2013, pp. 19–50.10.1080/17452759.2013.778175 Search in Google Scholar

20. Ngo, T. D, Kashani, A, Imbalzano, G, Nguyen, K. T. Q, and Hui, D, “Additive manufacturing (3D printing): A review of materials, methods, applications, and challenges”, Composites Part B: Engineering, Vol. 143, June 2018, pp. 172–196.10.1016/j.compositesb.2018.02.012 Search in Google Scholar

21. Mahamood, R. M and Akinlabi, E. T, “Types of Functionally Graded Materials and Their Areas of Application”, Functionally Graded Materials (Mahamood, R. M and Akinlabi, E. T, eds.), Topics in Mining, Metallurgy and Materials Engineering, Cham: Springer International Publishing, 2017, pp. 9–21.10.1007/978-3-319-53756-6_2 Search in Google Scholar

22. Popovich, V. A, Borisov, E. V, Popovich, A. A, Sufiiarov, V. S, Masaylo,D. V, and Alzina, L, “Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties”, Materials & Design, Vol. 114, Jan. 2017, pp. 441–449.10.1016/j.matdes.2016.10.075 Search in Google Scholar

23. Mirzaali, M. J, Caracciolo, A, Pahlavani, H, Janbaz, S, Vergani, L, and Zadpoor, A. A, “Multi-material 3D printed mechanical metamaterials: Rational design of elastic properties through spatial distribution of hard and soft phases”, Applied Physics Letters, Vol. 113, Dec. 2018, Article 241903.10.1063/1.5064864 Search in Google Scholar

24. Liu, T, Guessasma, S, Zhu, J, Zhang, W, and Belhabib, S, “Functionally graded materials from topology optimisation and stereolithography”, European Polymer Journal, Vol. 108, Nov. 2018, pp. 199–211.10.1016/j.eurpolymj.2018.08.038 Search in Google Scholar

25. Kuipers, T, Wu, J, and Wang, C. C. L, “CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion”, Computer-Aided Design, Vol. 114, pp. 37–50, Sept. 2019.10.1016/j.cad.2019.05.003 Search in Google Scholar

26. Greer, J. R and Deshpande, V. S, “Three-dimensional architected materials and structures: Design, fabrication, and mechanical behavior”, MRS Bulletin, Vol. 44, Oct. 2019, pp. 750–757.10.1557/mrs.2019.232 Search in Google Scholar

27. Dirrenberger, J, Towards an Integrated Approach for the Development of Architectured Materials. Thesis, Sorbonne Université, Dec. 2018. Search in Google Scholar

28. Martínez, J, Dumas, J, and Lefebvre, S, “Procedural Voronoi Foams for Additive Manufacturing”, ACM Transactions on Graphics, Vol. 35, 2016, pp. 1–14.10.1145/2897824.2925922 Search in Google Scholar

29. Schumacher, C, Bickel, B, Rys, J, Marschner, S, Daraio, C, and Gross, M, “Microstructures to control elasticity in 3D printing”, ACM Transactions on Graphics, Vol. 34, July 2015, pp. 136:1–136:13.10.1145/2766926 Search in Google Scholar

30. Van Der Putten, J, Deprez, M, Cnudde, V, De Schutter, G, and Van Tittelboom, K, “Microstructural Characterization of 3D Printed Cementitious Materials”, Materials, Vol. 12, Jan. 2019, p. 2993.10.3390/ma12182993676630631527419 Search in Google Scholar

31. Yu, S, Xia, M, Sanjayan, J, Yang, L, Xiao, J, and Du, H, “Microstructural characterization of 3D printed concrete”, Journal of Building Engineering, Vol. 44, Dec. 2021, Article 102948.10.1016/j.jobe.2021.102948 Search in Google Scholar

32. Vantyghem, G, De Corte, W, Boel, V, and Steeman, M, “Structural and thermal performances of topological optimized masonry blocks”, Asian Congress of Structural and Multidisciplinary Optimization 2016, 2016. Search in Google Scholar

33. Westerlind, H and Hernández, J, “Knitting Concrete”, Second RILEM International Conference on Concrete and Digital Fabrication (Bos, F. P, Lucas, S. S, Wolfs, R. J, and Salet, T. A, eds.), (Cham), Springer International Publishing, 2020, pp. 988–997.10.1007/978-3-030-49916-7_96 Search in Google Scholar

34. van den Heever, M, Bester, F, Kruger, J, and van Zijl, G, “Numerical modelling strategies for reinforced 3D concrete printed elements,” Additive Manufacturing, Vol. 50, Feb. 2022, Article, 102569. Search in Google Scholar

35. Singamneni, S, Roychoudhury, A, Diegel, O, and Huang, B, “Modelling and evaluation of curved layer fused deposition”, Journal of Materials Processing Technology, Vol. 212, Jan. 2012, pp. 27–35.10.1016/j.jmatprotec.2011.08.001 Search in Google Scholar

36. Cheng, T, Tahouni, Y, Wood, D, Stolz, B, Mülhaupt, R, and Menges, A, “Multifunctional Mesostructures: Design and Material Programming for 4D-printing”, Symposium on Computational Fabrication, SCF ’20, (New York, NY, USA), Association for Computing Machinery, Nov. 2020, pp. 1–10.10.1145/3424630.3425418 Search in Google Scholar

37. Li, S, Wang, S, Yu, Y, Zhang, X, and Wang, Y, “Design of heterogeneous mesoscale structure for high mechanical properties based on force-flow: 2D geometries”, Additive Manufacturing, Vol. 46, Oct. 2021, Article 102063.10.1016/j.addma.2021.102063 Search in Google Scholar

38. Dirrenberger, J, “From Architectured Materials to Large-Scale Additive Manufacturing”, Robotic Building (Bier, H, ed.), Springer Series in Adaptive Environments, Springer International Publishing, 2018, pp. 79–96.10.1007/978-3-319-70866-9_4 Search in Google Scholar

39. Breseghello, L, “Toolpath Simulation, Design and Manipulation in Robotic 3D Concrete Printing”, in A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (Eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 623-632.10.52842/conf.caadria.2021.1.623 Search in Google Scholar

40. Wu, J, Aage, N, Westermann, R, and Sigmund, O, “Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures”, IEEE Transactions on Visualization and Computer Graphics, Vol. 24, Feb. 2018, pp. 1127–1140.10.1109/TVCG.2017.265552328129160 Search in Google Scholar

41. Roesler, J, Paulino, G, Gaedicke, C, Bordelon, A, and Park, K, “Fracture Behavior of Functionally Graded Concrete Materials for Rigid Pavements”, Transportation Research Record, Vol. 2037, Jan. 2007, pp. 40–49. Search in Google Scholar

42. Wen, X.-d, Tu, J.-l, and Gan, W.-z, “Durability protection of the functionally graded structure concrete in the splash zone”, Construction and Building Materials, Vol. 41, Apr. 2013, pp. 246–251.10.1016/j.conbuildmat.2012.11.119 Search in Google Scholar

43. Nes, L. G and Øverli, J. A, “Structural behaviour of layered beams with fibre-reinforced LWAC and normal density concrete”, Materials and Structures, Vol. 49, Jan. 2016, pp. 689–703.10.1617/s11527-015-0530-9 Search in Google Scholar

44. Bajaj, K, Shrivastava, Y, and Dhoke, P, “Experimental Study of Functionally Graded Beam with Fly Ash”, Journal of The Institution of Engineers (India): Series A, Vol. 94, Nov. 2013, pp. 219–227.10.1007/s40030-014-0057-z Search in Google Scholar

45. Heinz, P, Herrmann, M, and Sobek, W, “Herstellungsverfahren und Anwendungsbereiche für functional gradierte Bauteile im Bauwesen. Abschlussbericht”, 2012. Search in Google Scholar

46. Herrmann, M and Sobek, W, “Functionally graded concrete: Numerical design methods and experimental tests of mass-optimized structural components”, Structural Concrete, Vol. 18, no. 1, 2017, pp. 54–66.10.1002/suco.201600011 Search in Google Scholar

47. Buswell, R. A, da Silva, W. R. L, Bos, F. P, Schipper, H. R, Lowke, D, Hack, N, Kloft, H, Mechtcherine, V, Wangler, T, and Roussel, N, “A process classification framework for defining and describing Digital Fabrication with Concrete”, Cement and Concrete Research, Vol. 134, Aug. 2020, Article 106068.10.1016/j.cemconres.2020.106068 Search in Google Scholar

48. Bos, F, Wolfs, R, Ahmed, Z, and Salet, T, “Additive manufacturing of concrete in construction: Potentials and challenges of 3D concrete printing”, Virtual and Physical Prototyping, Vol. 11, no. 3, 2016, pp. 209–225.10.1080/17452759.2016.1209867 Search in Google Scholar

49. Pajonk, A, Prieto, A, Blum, U, and Knaack, U, “Multi-material additive manufacturing in architecture and construction: A review”, Journal of Building Engineering, Vol. 45, Jan. 2022, Article 103603.10.1016/j.jobe.2021.103603 Search in Google Scholar

50. Tay, Y. W. D, Panda, B, Paul, S. C, Mohamed, N. A. N, Tan, M. J, and Leong, K. F, “3D printing trends in building and construction industry: A review”, Virtual and Physical Prototyping, Vol. 12, July 2017, pp. 261–276.10.1080/17452759.2017.1326724 Search in Google Scholar

51. Craveiro, F, Bártolo, H, and Bártolo, P, “Functionally graded structures through building manufacturing”, Advanced Materials Research, Vol. 683, 2013, pp. 775–778.10.4028/www.scientific.net/AMR.683.775 Search in Google Scholar

52. Craveiro, F, Duarte, J. P, Bártolo, H, and Bartolo, P. J, “Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0”, Automation in Construction, Vol. 103, July 2019, pp. 251–267.10.1016/j.autcon.2019.03.011 Search in Google Scholar

53. Craveiro, F, Nazarian, S, Bartolo, H, Bartolo, P. J, and Pinto Duarte, J, “An automated system for 3D printing functionally graded concrete-based materials”, Additive Manufacturing, Vol. 33, May 2020, Article 101146.10.1016/j.addma.2020.101146 Search in Google Scholar

54. Reiter, L, Wangler, T, Anton, A, and Flatt, R. J, “Setting on demand for digital concrete – Principles, measurements, chemistry, validation”, Cement and Concrete Research, Vol. 132, June 2020, Article 106047.10.1016/j.cemconres.2020.106047 Search in Google Scholar

55. Anton, A. Y, “Vertical Modulations”, ACADIA 19: UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019), CUMINCAD, 2019, pp. 596-605.10.52842/conf.acadia.2019.596 Search in Google Scholar

56. Anton, A, Bedarf, P, Yoo, A, Dillenburger, B, Reiter, L, Wangler, T, and Flatt, R. J, “Concrete Choreography: Prefabrication of 3D-Printed Columns”, Fabricate 2020: Making Resilient Architecture, UCL Press, Apr. 2020, pp. 286–293.10.2307/j.ctv13xpsvw.41 Search in Google Scholar

57. Anton, A, Jipa, A, Reiter, L, and Dillenburger, B, “Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs”, Second RILEM International Conference on Concrete and Digital Fabrication (Bos, F. P, Lucas, S. S, Wolfs, R. J, and Salet, T. A, eds.), RILEM Bookseries, (Cham), Springer International Publishing, 2020, pp. 1067–1077.10.1007/978-3-030-49916-7_102 Search in Google Scholar

58. Ahmed, Z, Bos, F, van Brunschot, M, and Salet, T, “On-demand additive manufacturing of functionally graded concrete”, Virtual and Physical Prototyping, Vol. 15, no. 2, 2020, pp. 194–210.10.1080/17452759.2019.1709009 Search in Google Scholar

59. Gebhard, L, Mata-Falcón, J, Markić, T, and Kaufmann, W, “Aligned Interlayer Fibre Reinforcement for Digital Fabrication with Concrete”, Fibre Reinforced Concrete: Improvements and Innovations (Serna, P, Llano-Torre, A, Martí-Vargas, J. R, and Navarro-Gregori, J, eds.), RILEM Bookseries, (Cham), Springer International Publishing, 2021, pp. 87–98.10.1007/978-3-030-58482-5_8 Search in Google Scholar

60. Shen, W, Wu, M, Zhang, B, Xu, G, Cai, J, Xiong, X, and Zhao, D, “Coarse aggregate effectiveness in concrete: Quantitative models study on paste thickness, mortar thickness and compressive strength” Construction and Building Materials, Vol. 289, June 2021, p. 123171.10.1016/j.conbuildmat.2021.123171 Search in Google Scholar

61. Duballet, R, Baverel, O, and Dirrenberger, J, “Building Systems in Robotic Extrusion of Cementitious Materials”, PhD thesis, Sept. 2019. Search in Google Scholar

62. Duballet, R, Gosselin, C, and Roux, P, “Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene Aggregate Concrete Structures”, Modelling Behaviour: Design Modelling Symposium 2015 (Thomsen, M. R, Tamke, M, Gengnagel, C, Faircloth, B, and Scheurer, F, eds.), Cham: Springer International Publishing, 2015, pp. 225–235.10.1007/978-3-319-24208-8_19 Search in Google Scholar

63. Choy, S. Y, Sun, C.-N, Leong, K. F, and Wei, J, “Compressive properties of functionally graded lattice structures manufactured by selective laser melting”, Materials & Design, Vol. 131, Oct. 2017, pp. 112–120.10.1016/j.matdes.2017.06.006 Search in Google Scholar

64. Tay, D. Y. W, “Large scale 3D concrete printing: Process and materials properties”, 2020. Search in Google Scholar

65. Tay, Y. W. D, Lim, J. H, Li, M, and Tan, M. J, “Creating functionally graded concrete materials with varying 3D printing parameters”, Virtual and Physical Prototyping, Vol. 17, no. 3, Mar. 2022, pp. 662–681.10.1080/17452759.2022.2048521 Search in Google Scholar

66. Yuan, P. F, Zhan, Q, Wu, H, Beh, H. S, and Zhang, L, “Real-time toolpath planning and extrusion control (RTPEC) method for variable- width 3D concrete printing”, Journal of Building Engineering, Vol. 46, Apr. 2022, Article 103716.10.1016/j.jobe.2021.103716 Search in Google Scholar

67. Bendsøe, M. P and Sigmund, O, “Design with anisotropic materials”, Topology Optimization: Theory, Methods, and Applications (Bendsøe, M. P and Sigmund, O, eds.), Berlin, Heidelberg: Springer, 2004, pp. 159–220. Search in Google Scholar

68. Beghini, L. L, Beghini, A, Katz, N, Baker, W. F, and Paulino, G. H, “Connecting architecture and engineering through structural topology optimization”, Engineering Structures, Vol. 59, Feb. 2014, pp. 716–726.10.1016/j.engstruct.2013.10.032 Search in Google Scholar

69. Craveiro, F, Bartolo, H. M, Gale, A, Duarte, J. P, and Bartolo, P. J, “A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing”, Automation in Construction, Vol. 82, Oct. 2017, pp. 75–83.10.1016/j.autcon.2017.05.006 Search in Google Scholar

70. Roussel, N, “Rheological requirements for printable concretes”, Cement and Concrete Research, Vol. 112, Oct. 2018, pp. 76–85.10.1016/j.cemconres.2018.04.005 Search in Google Scholar

71. Suiker, A. S. J, “Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments”, International Journal of Mechanical Sciences, Vol. 137, Mar. 2018, pp. 145–170.10.1016/j.ijmecsci.2018.01.010 Search in Google Scholar

72. Wolfs, R. J. M, Bos, F. P, and Salet, T. A. M, “Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing”, Cement and Concrete Research, Vol. 106, Apr. 2018, pp. 103–116.10.1016/j.cemconres.2018.02.001 Search in Google Scholar

73. Vantyghem, G, Ooms, T, and De Corte, W, “FEM modelling techniques for simulation of 3D concrete printing”, arXiv:2009.06907 [physics], Sept. 2020. Search in Google Scholar

74. Vantyghem, G, Ooms, T, and De Corte, W, “VoxelPrint: A Grasshopper plug-in for voxel-based numerical simulation of concrete printing”, Automation in Construction, Vol. 122, Feb. 2021, Article 103469.10.1016/j.autcon.2020.103469 Search in Google Scholar

75. Comminal, R, Leal da Silva, W. R, Andersen, T. J, Stang, H, and Spangenberg, J, “Modelling of 3D concrete printing based on computational fluid dynamics”, Cement and Concrete Research, Vol. 138, Dec. 2020, Article 106256.10.1016/j.cemconres.2020.106256 Search in Google Scholar

76. Wolfs, R. J. M, Salet, T. A. M, and Roussel, N, “Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly”, Cement and Concrete Research, Vol. 150, Dec. 2021, Article 106615.10.1016/j.cemconres.2021.106615 Search in Google Scholar

77. Brauer, C and Aukes, D. M, “Automated Generation of Multi-Material Structures Using the VoxelFuse Framework”, Symposium on Computational Fabrication, SCF ’20, (New York, NY, USA), Association for Computing Machinery, Nov. 2020, pp. 1–8.10.1145/3424630.3425417 Search in Google Scholar

Articles recommandés par Trend MD

Planifiez votre conférence à distance avec Sciendo