[1. Hind A R, Bhargava S K & Grocott S C: “The surface chemistry of Bayer process solids: a review”. Colloids and Surfaces; A: Physiochemical and Engineering Aspects, No. 146, 1998, pp. 359-374.10.1016/S0927-7757(98)00798-5]Search in Google Scholar
[2. Yang J & Xiao B: “Development of unsintered construction materials from red mud wastes produced in the sintering alumina process”. Construction and Building Materials, Vol. 22, No. 12, 2008, pp. 2299-2307.10.1016/j.conbuildmat.2007.10.005]Search in Google Scholar
[3. Rai S, Wasewar K, Mukhopadhyay J, Yoo C & Uslu H: “Neutralization and Utilization of red mud for its better waste management”. Arch. Environ. Sci., Vol. 6, 2012.]Search in Google Scholar
[4. Liu X & Zhang N: “Utilization of red mud in cement production: a review”. Waste Management & Research, Vol. 29, No. 10, 2011, pp. 1053-1063.10.1177/0734242X1140765321930526]Search in Google Scholar
[5. Khairul M A, Zanganeh J & Moghtaderi B: “The composition, recycling and utilisation of Bayer red mud”. Resources, Conservation and Recycling, Vol. 141, 2019, pp. 483-498.10.1016/j.resconrec.2018.11.006]Search in Google Scholar
[6. Lima M S S, Thives L P, Haritonovs V & Bajars K: “Red mud application in construction industry: review of benefits and possibilities”. IOP Conference Series: Materials Science and Engineering, Vol. 251, 2017, pp. 12-33.10.1088/1757-899X/251/1/012033]Search in Google Scholar
[7. Scrivener K L, John V M & Gartner E M: “Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry”. Cement and Concrete Research, Vol. 114, 2018, pp. 2-26.10.1016/j.cemconres.2018.03.015]Search in Google Scholar
[8. Boden T & Andres B: “Global CO2 emissions from fossil-fuel burning, cement manufacture, and gas flaring”. Tennesse Carbon Dioxide Information Analysis Centre, Oak Ridge National Laboratory, 2016,]Search in Google Scholar
[9. Venkatesh C, Chand M S R & Nerella R: “A State of the Art on Red Mud as a Substitutional Cementitious Material”. Annales de Chimie: Science des Materiaux, Vol. 43, No. 2, 2019, pp. 99-106.10.18280/acsm.430206]Search in Google Scholar
[10. Ribeiro D V, Labrincha J A & Morelli M R: “Effect of red mud addition on the corrosion parameters of reinforced concrete evaluated by electrochemical methods”. Revista IBRACON de Estruturas e Materiais, Vol. 5, 2012, pp. 451-467.10.1590/S1983-41952012000400004]Search in Google Scholar
[11. Deshmukh M P, Sarode D D & Claude A: “Effect of partial replacement of crushed fine aggregates with an industrial waste (red mud) on chloride penetration of concrete.”. International Journal of Current Engineering and Technology, Vol. 6, No. 4, 2014, pp. 4026-4029.]Search in Google Scholar
[12. Rajendran R R, Pillaib E B & Santhakumai A R: “Effective utilization of redmud bauxite waste as a replacement of cement in concrete for environmental conservation”. Ecology, Environment and Conservation, Vol. 19, 2013, pp. 247-255.]Search in Google Scholar
[13. Kótai L, Sajó I, Gács I, Papp K, Bartha A & Bánvölgyi G: “An Environmentally Friendly Method for Removing Sodium in Red Mud”. Chemistry Letters - CHEM LETT, Vol. 35, 2006, pp. 1278-1279.10.1246/cl.2006.1278]Search in Google Scholar
[14. Xue S-g, Wu Y-j, Li Y-w, Kong X-f, Zhu F, William H, Li X-f & Ye Y-z: “Industrial wastes applications for alkalinity regulation in bauxite residue: A comprehensive review”. Journal of Central South University, Vol. 26, No. 2, 2019, pp. 268-288.10.1007/s11771-019-4000-3]Search in Google Scholar
[15. Jansen D, Goetz-Neunhoeffer F, Stabler C & Neubauer J: “A remastered external standard method applied to the quantification of early OPC hydration”. Cement and Concrete Research, Vol. 41, No. 6, 2011, pp. 602-608.10.1016/j.cemconres.2011.03.004]Search in Google Scholar
[16. Madsen Ian C, Scarlett Nicola V Y & Kern A: “Description and survey of methodologies for the determination of amorphous content via X-ray powder diffraction”. Zeitschrift für Kristallographie Crystalline Materials, Vol. 226, No. 12, 2011, pp. 944.10.1524/zkri.2011.1437]Search in Google Scholar
[17. O’Connor B H & Raven M D: “Application of the Rietveld Refinement Procedure in Assaying Powdered Mixtures”. Powder Diffraction, Vol. 3, No. 1, 1988, pp. 2-6.10.1017/S0885715600013026]Search in Google Scholar
[18. Avet F, Snellings R, Alujas Diaz A, Ben Haha M & Scrivener K: “Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays”. Cement and Concrete Research, Vol. 85, 2016, pp. 1-11.10.1016/j.cemconres.2016.02.015]Search in Google Scholar
[19. Dilnesa B Z: “Fe-containing hydrates and their fate during cement hydration: thermodynamic data and experimental study”. (PhD Thesis), École Polytechnique Fédérale de Lausanne, 2011,]Search in Google Scholar
[20. Justnes H, Engelsen C, Danner T & Strøm M. “Evaluation of Ceramic Waste from Goa as SCM”. Proceedings, 3rd International Conference on Calcined Clays for Sustainable Concrete, Delhi, India, 2019.10.1007/978-981-15-2806-4_8]Search in Google Scholar
[21. De Weerdt K & Justnes H. “Microstructure of Binder from the Pozzolanic Reaction between Lime and Siliceous Fly Ash, and the Effect of Limestone Addition”. Proceedings, 1st Int. Conf. on Microstructure Related Durability of Cementitious Composites, 13-15 October, 2008, Nanjing, China, pp. 107-116, RILEM Proceeding PRO 61., 2008.]Search in Google Scholar
[22. De Weerdt K, Justnes H, Kjellsen K O & Sellevold E. “Synergic Reactions in Triple Blended Cements”. Proceedings, 11th NCB International Seminar on Cement and Building Materials, New Delhi, India, 2009, pp. 257-261.]Search in Google Scholar
[23. De Weerdt K, Justnes H, Kjellsen K O & Sellevold E: “Fly Ash Limestone Ternary Composite Cements: Synergy Effect at 28 days”. Nordic Concrete Research, Vol. 42, 2010, pp. 51-70.]Search in Google Scholar
[24. Danner T: “Reactivity of calcined clays”. 2013:218 (PhD Thesis), Norwegian University of Science and Technology - NTNU, 2013, pp. 229]Search in Google Scholar
[25. Danner T, Norden G & Justnes H: “Characterisation of calcined raw clays suitable as supplementary cementitious materials”. Applied Clay Science, Vol. 162, 2018, pp. 391-402.10.1016/j.clay.2018.06.030]Search in Google Scholar
[26. Karen S, François A, Hamed M, Franco Z, Julien S, Wilasinee H & Aurélie F: “Impacting factors and properties of limestone calcined clay cements (LC3)”. Green Materials, Vol. 7, No. 1, 2019, pp. 3-14.10.1680/jgrma.18.00029]Search in Google Scholar
[27. Jansen D, Goetz-Neunhoeffer F, Lothenbach B & Neubauer J: “The early hydration of Ordinary Portland Cement (OPC): An approach comparing measured heat flow with calculated heat flow from QXRD”. Cement and Concrete Research, Vol. 42, No. 1, 2012, pp. 134-138.10.1016/j.cemconres.2011.09.001]Search in Google Scholar
[28. Ribeiro D V, Labrincha J A & Morelli M R: “Potential use of natural red mud as pozzolan for Portland cement”. Materials Research, Vol. 14, 2011, pp. 60-66.10.1590/S1516-14392011005000001]Search in Google Scholar
[29. Jawed I & Skalny J: “Alkalies in cement: A review: II. Effects of alkalies on hydration and performance of Portland cement”. Cement and Concrete Research, Vol. 8, No. 1, 1978, pp. 37-51.10.1016/0008-8846(78)90056-X]Search in Google Scholar
[30. De Noni A, Minatto F D, Pelisser F, Peterson M & Montedo O R K. “Development of Supplementary Cementing Materials from Red Mud”. Proceedings, 32nd International Conference and Exhibition of ICSOBA (The International Committee for Study of Bauxite, Alumina & Aluminium), Zhengzhou, Henan Province, China, 2014, pp. 7.]Search in Google Scholar
[31. Yujiang W, Min D & Mingshu T: “Alkali release from aggregate and the effect on AAR expansion”. Materials and Structures, Vol. 41, No. 1, 2007, pp. 159.10.1617/s11527-007-9227-z]Search in Google Scholar
[32. Van Aardt J & Visser S: “Reaction of Ca (OH) 2 and of Ca (OH) 2+ CaSO4. 2H2O at various temperatures with feldspars in aggregates used for concrete making”. Cement and Concrete Research, Vol. 8, No. 6, 1978, pp. 677-681.10.1016/0008-8846(78)90076-5]Search in Google Scholar
[33. Sabir B B, Wild S & Bai J: “Metakaolin and calcined clays as pozzolans for concrete: a review”. Cement and Concrete Composites, Vol. 23, No. 6, 2001, pp. 441-454.10.1016/S0958-9465(00)00092-5]Search in Google Scholar
[34. Zhou B, Cao S, Chen F, Zhang F & Zhang Y: “Recovery of Alkali from Bayer Red Mud Using CaO and/or MgO”. Minerals, Vol. 9, No. 5, 2019, pp. 269.10.3390/min9050269]Search in Google Scholar
[35. Danner T, Norden G & Justnes H: “Calcareous smectite clay as a pozzolanic alternative to kaolin”. European Journal of Environmental and Civil Engineering, 2019, pp. 1-18.10.1080/19648189.2019.1590741]Search in Google Scholar
[36. Antoni M, Rossen J, Martirena F & Scrivener K: “Cement substitution by a combination of metakaolin and limestone”. Cement and Concrete Research, Vol. 42, No. 12, 2012, pp. 1579-1589.10.1016/j.cemconres.2012.09.006]Search in Google Scholar
[37. Lothenbach B, Scrivener K & Hooton R D: “Supplementary cementitious materials”. Cement and Concrete Research, Vol. 41, No. 12, 2011, pp. 1244-1256.10.1016/j.cemconres.2010.12.001]Search in Google Scholar