Maximizing the functional properties of epoxy coatings using milled Al for enhanced mechanical strength and corrosion resistance

[1] Tjong, S.C., Chen, H., Nanocrystalline materials and coatings, Mat. Sci. Eng. R., 2004, 45: 1–88. 10.1016/j.mser.2004.07.001 Tjong S.C. Chen H. Nanocrystalline materials and coatings Mat. Sci. Eng. R. 2004 45 1 88 10.1016/j.mser.2004.07.001 Open DOI

[2] Andrievski, R.A., Films as nanostructured materials with characteristic mechanical properties, Mater. Trans., 2001, 42: 1471–1473. 10.2320/matertrans.42.1471 Andrievski R.A. Films as nanostructured materials with characteristic mechanical properties Mater. Trans. 2001 42 1471 1473 10.2320/matertrans.42.1471 Open DOI

[3] Zhou, F.L., Gong, R.H., Porat, I., Mass production of nanofibre assemblies by electrostatic spinning, Polym. Int., 2009, 58: 331–342. 10.1002/pi.2521 Zhou F.L. Gong R.H. Porat I. Mass production of nanofibre assemblies by electrostatic spinning Polym. Int. 2009 58 331 342 10.1002/pi.2521 Open DOI

[4] Galliano, F., Landolt, D., Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel, Prog. Org. Coat., 2002, 44: 217–225. 10.1016/S0300-9440(02)00016-4 Galliano F. Landolt D. Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel Prog. Org. Coat. 2002 44 217 225 10.1016/S0300-9440(02)00016-4 Open DOI

[5] Rajagopalan, N., Khanna, A.S., Effect of size and morphology on UV-blocking property of nanoZnO in epoxy coating, Int. J. Sci. Res. Publ., 2013, 3: 1–14 Rajagopalan N. Khanna A.S. Effect of size and morphology on UV-blocking property of nanoZnO in epoxy coating Int. J. Sci. Res. Publ. 2013 3 1 14 Search in Google Scholar

[6] hang, M.Q., Rong, M.Z., Yu, S.L., Wetzel, B., Friedrich, K., Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles, Macromol. Mater. Eng., 2002, 287: 111–115. 10.1002/1439-2054(20020201)287:2<111::AID-MAME111>3.0.CO;2-I hang M.Q. Rong M.Z. Yu S.L. Wetzel B. Friedrich K. Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles Macromol. Mater. Eng. 2002 287 111 115 10.1002/1439-2054(20020201)287:2<111::AID-MAME111>3.0.CO;2-I Open DOI

[7] Shi, X.M., Nguyen, T.A., Suo, Z.Y., Liu, Y.J., Avci, R., Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating, Surf. Coat. Technol., 2009, 204: 237–245. 10.1016/j.surfcoat.2009.06.048 Shi X.M. Nguyen T.A. Suo Z.Y. Liu Y.J. Avci R. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating Surf. Coat. Technol. 2009 204 237 245 10.1016/j.surfcoat.2009.06.048 Open DOI

[8] Chattopadhyay, D.K., Raju, K.V.S.N., Structural engineering of polyurethane coatings for high performance applications, Prog. Polym. Sci., 2007, 32: 352–418. 10.1016/j.progpolymsci.2006.05.003 Chattopadhyay D.K. Raju K.V.S.N. Structural engineering of polyurethane coatings for high performance applications Prog. Polym. Sci. 2007 32 352 418 10.1016/j.progpolymsci.2006.05.003 Open DOI

[9] Hare, C.H., Corrosion control of steel by organic coatings, Uhlig’s corrosion handbook, Ed. Revie, R.W., 2011, pp. 971–983. 10.1002/9780470872864.ch67pp Hare C.H. Corrosion control of steel by organic coatings Uhlig’s corrosion handbook Ed. Revie R.W. 2011 pp. 971 983 10.1002/9780470872864.ch67pp Open DOI

[10] Compere, C., Frechette, E., Ghali, E., The corrosion evaluation of painted and artificially damaged painted steel panels by Ac-impedance measurements, Corros. Sci., 1993, 34: 1259–1274. 10.1016/0010-938x(93)90086-V Compere C. Frechette E. Ghali E. The corrosion evaluation of painted and artificially damaged painted steel panels by Ac-impedance measurements Corros. Sci. 1993 34 1259 1274 10.1016/0010-938x(93)90086-V Open DOI

[11] Fedullo, N., Sorlier, E., Sclavons, M., Bailly, C., Lefebvre, J.M., Devaux, J., Polymer-based nanocomposites: Overview, applications and perspectives, Prog. Org. Coat., 2007, 58: 87–95. 10.1016/j.porgcoat.2006.09.028 Fedullo N. Sorlier E. Sclavons M. Bailly C. Lefebvre J.M. Devaux J. Polymer-based nanocomposites: Overview, applications and perspectives Prog. Org. Coat. 2007 58 87 95 10.1016/j.porgcoat.2006.09.028 Open DOI

[12] Yang, L.H., Liu, F.C., Han, E.H., Effects of P/B on the properties of anticorrosive coatings with different particle size, Prog. Org. Coat., 2005, 53: 91–98. 10.1016/j.porgcoat.2005.01.003 Yang L.H. Liu F.C. Han E.H. Effects of P/B on the properties of anticorrosive coatings with different particle size Prog. Org. Coat. 2005 53 91 98 10.1016/j.porgcoat.2005.01.003 Open DOI

[13] González, S., Cáceres, F., Fox, V., Souto, R.M., Resistance of metallic substrates protected by an organic coating containing aluminum powder, Prog. Org. Coat., 2003, 46: 317–323. 10.1016/s0300-9440(03)00021-3 González S. Cáceres F. Fox V. Souto R.M. Resistance of metallic substrates protected by an organic coating containing aluminum powder Prog. Org. Coat. 2003 46 317 323 10.1016/s0300-9440(03)00021-3 Open DOI

[14] Becker, O., Varley, R., Simon, G., Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resins, Polymer, 2002, 43: 4365–4373. 10.1016/S0032-3861(02)00269-0 Becker O. Varley R. Simon G. Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resins Polymer 2002 43 4365 4373 10.1016/S0032-3861(02)00269-0 Open DOI

[15] González, S., Mirza Rosca, I.C., Souto, R.M., Investigation of the corrosion resistance characteristics of pigments in alkyd coatings on steel, Prog. Org. Coat., 2001, 43: 282–285. 10.1016/s0300-9440(01)00210-7 González S. Mirza Rosca I.C. Souto R.M. Investigation of the corrosion resistance characteristics of pigments in alkyd coatings on steel Prog. Org. Coat. 2001 43 282 285 10.1016/s0300-9440(01)00210-7 Open DOI

[16] Supplit, R., Schubert, U., Corrosion protection of aluminum pigments by sol–gel coatings, Corros. Sci., 2007, 49: 3325–3332. 10.1016/j.corsci.2007.03.014 Supplit R. Schubert U. Corrosion protection of aluminum pigments by sol–gel coatings Corros. Sci. 2007 49 3325 3332 10.1016/j.corsci.2007.03.014 Open DOI

[17] Zhang, Y.C., Ye, H.Q., Liu, H., Han, K., Preparation and characterisation of aluminium pigments coated with silica for corrosion protection, Corros. Sci., 2011, 53: 1694–1699. 10.1016/j.corsci.2011.01.027 Zhang Y.C. Ye H.Q. Liu H. Han K. Preparation and characterisation of aluminium pigments coated with silica for corrosion protection Corros. Sci. 2011 53 1694 1699 10.1016/j.corsci.2011.01.027 Open DOI

[18] Karbasi, A., Moradian, S., Tahmassebi, N., Ghodsi, P., Achievement of optimal aluminum flake orientation by the use of special cubic experimental design, Prog. Org. Coat., 2006, 57: 175–182. 10.1016/j.porgcoat.2006.06.008 Karbasi A. Moradian S. Tahmassebi N. Ghodsi P. Achievement of optimal aluminum flake orientation by the use of special cubic experimental design Prog. Org. Coat. 2006 57 175 182 10.1016/j.porgcoat.2006.06.008 Open DOI

[19] Jalili, M., Rostami, M., Ramezanzadeh, B., An investigation of the electrochemical action of the epoxy zinc-rich coatings containing surface modified aluminum nanoparticle, Appl. Surf. Sci., 2015, 328: 95–108. 10.1016/j.apsusc.2014.12.034 Jalili M. Rostami M. Ramezanzadeh B. An investigation of the electrochemical action of the epoxy zinc-rich coatings containing surface modified aluminum nanoparticle Appl. Surf. Sci. 2015 328 95 108 10.1016/j.apsusc.2014.12.034 Open DOI

[20] Madhankumar, A., Nagarajan, S., Rajendran, N., Nishimura, T., EIS evaluation of protective performance and surface characterization of epoxy coating with aluminum nanoparticles after wet and dry corrosion test, J. Solid. State. Electr., 2012, 16: 2085–2093. 10.1007/s10008-011-1623-1 Madhankumar A. Nagarajan S. Rajendran N. Nishimura T. EIS evaluation of protective performance and surface characterization of epoxy coating with aluminum nanoparticles after wet and dry corrosion test J. Solid. State. Electr. 2012 16 2085 2093 10.1007/s10008-011-1623-1 Open DOI

[21] Liang, Y., Liu, F.C., Nie, M., Zhao, S.Y., Lin, J.D., Han, E.H., Influence of nano-Al concentrates on the corrosion resistance of epoxy coatings, J. Mater. Sci. Technol., 2013, 29: 353–358. 10.1016/j.jmst.2013.01.014 Liang Y. Liu F.C. Nie M. Zhao S.Y. Lin J.D. Han E.H. Influence of nano-Al concentrates on the corrosion resistance of epoxy coatings J. Mater. Sci. Technol. 2013 29 353 358 10.1016/j.jmst.2013.01.014 Open DOI

[22] Alam, M.A., Samad, U.A., Seikh, A., Mohammed, J.A., Al-Zahrani, S.M., Sherif, E.S.M., Development and characterization of PA 450 and PA 3282 epoxy coatings as anti-corrosion materials for offshore applications, Materials, 2022, 15: 2562. ARTN 256210.3390/ma15072562 Alam M.A. Samad U.A. Seikh A. Mohammed J.A. Al-Zahrani S.M. Sherif E.S.M. Development and characterization of PA 450 and PA 3282 epoxy coatings as anti-corrosion materials for offshore applications Materials 2022 15 2562 ARTN 256210.3390/ma15072562 Open DOI

[23] Abdus Samad, U., Alam, M.A., Seikh, A.H., Mohammed, J.A., Al-Zahrani, S.M., Sherif, E.-S.M., Corrosion resistance performance of epoxy coatings incorporated with unmilled micro aluminium pigments, Crystals, 2023, 13: 558. 10.3390/cryst13040558 Abdus Samad U. Alam M.A. Seikh A.H. Mohammed J.A. Al-Zahrani S.M. Sherif E.-S.M. Corrosion resistance performance of epoxy coatings incorporated with unmilled micro aluminium pigments Crystals 2023 13 558 10.3390/cryst13040558 Open DOI

[24] Rijesh, M., Sreekanth, M.S., Deepak, A., Dev, K., Surendranathan, A.O., Effect of milling time on production of aluminium nanoparticle by high energy ball milling, Int. J. Mech. Eng. Technol., 2018 9(8): 646–652 Rijesh M. Sreekanth M.S. Deepak A. Dev K. Surendranathan A.O. Effect of milling time on production of aluminium nanoparticle by high energy ball milling Int. J. Mech. Eng. Technol. 2018 9 8 646 652 Search in Google Scholar

[25] Deka, S., Mozafari, F., Mallick, A., Thamburaja, P., Gupta, M., Development of high-performance nanostructured aluminum and its constitutive modeling, Mech. Adv. Mater. Struct., 2023, 31: 1–20. 10.1080/15376494.2023.2262733 Deka S. Mozafari F. Mallick A. Thamburaja P. Gupta M. Development of high-performance nanostructured aluminum and its constitutive modeling Mech. Adv. Mater. Struct. 2023 31 1 20 10.1080/15376494.2023.2262733 Open DOI

[26] Azani, N.F.S.M., Hussin, M.H., Comparison of cellulose nanocrystal (CNC) filler on chemical, mechanical, and corrosion properties of epoxy-Zn protective coatings for mild steel in 3.5% NaCl solution, Cellulose, 2021, 28: 6523–6543. 10.1007/s10570-021-03910-x Azani N.F.S.M. Hussin M.H. Comparison of cellulose nanocrystal (CNC) filler on chemical, mechanical, and corrosion properties of epoxy-Zn protective coatings for mild steel in 3.5% NaCl solution Cellulose 2021 28 6523 6543 10.1007/s10570-021-03910-x Open DOI

[27] Kim, H.J., Jung, D.H., Jung, I.H., Cifuentes, J.I., Rhee, K.Y., Hui, D., Enhancement of mechanical properties of aluminium/epoxy composites with silane functionalization of aluminium powder, Compos. Part. B-Eng., 2012, 43: 1743–1748. 10.1016/j.compositesb.2011.12.010 Kim H.J. Jung D.H. Jung I.H. Cifuentes J.I. Rhee K.Y. Hui D. Enhancement of mechanical properties of aluminium/epoxy composites with silane functionalization of aluminium powder Compos. Part. B-Eng. 2012 43 1743 1748 10.1016/j.compositesb.2011.12.010 Open DOI

[28] Oliver, W.C., Pharr, G.M., An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, 7: 1564–1583. 10.1557/Jmr.1992.1564 Oliver W.C. Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments J. Mater. Res. 1992 7 1564 1583 10.1557/Jmr.1992.1564 Open DOI

[29] Samad, U.A., Alam, M.A., Chafidz, A., Al-Zahrani, S.M., Alharthi, N.H., Enhancing mechanical properties of epoxy/polyaniline coating with addition of ZnO nanoparticles: Nanoindentation characterization, Prog. Org. Coat., 2018, 119: 109–115. 10.1016/j.porgcoat.2018.02.018 Samad U.A. Alam M.A. Chafidz A. Al-Zahrani S.M. Alharthi N.H. Enhancing mechanical properties of epoxy/polyaniline coating with addition of ZnO nanoparticles: Nanoindentation characterization Prog. Org. Coat. 2018 119 109 115 10.1016/j.porgcoat.2018.02.018 Open DOI

[30] Vyazovkin, S., Modification of the integral isoconversional method to account for variation in the activation energy, J. Comput. Chem., 2001, 22: 178–183. 10.1002/1096-987x(20010130)22:2<178:Aid-Jcc5>3.0.Co;2-# Vyazovkin S. Modification of the integral isoconversional method to account for variation in the activation energy J. Comput. Chem. 2001 22 178 183 10.1002/1096-987x(20010130)22:2<178:Aid-Jcc5>3.0.Co;2-# Open DOI

[31] Nicodemo, L., Nicolais, L., Mechanical-properties of metal polymer composites, J. Mater. Sci. Lett., 1983, 2: 201–203. 10.1007/Bf00725619 Nicodemo L. Nicolais L. Mechanical-properties of metal polymer composites J. Mater. Sci. Lett. 1983 2 201 203 10.1007/Bf00725619 Open DOI

[32] Taşdemır, M., Gülsoy, H.Ö., Mechanical properties of polymers filled with iron powder, Int. J. Polym. Mater., 2008, 57: 258–265. 10.1080/00914030701473656 Taşdemır M. Gülsoy H.Ö. Mechanical properties of polymers filled with iron powder Int. J. Polym. Mater. 2008 57 258 265 10.1080/00914030701473656 Open DOI

[33] Anis, A., Elnour, A.Y., Alam, M.A., Al-Zahrani, S.M., AlFayez, F., Bashir, Z., Aluminum-filled amorphous-PET, a composite showing simultaneous increase in modulus and impact resistance, Polymers (Basel), 2020, 12: 2038. 10.3390/polym12092038 Anis A. Elnour A.Y. Alam M.A. Al-Zahrani S.M. AlFayez F. Bashir Z. Aluminum-filled amorphous-PET, a composite showing simultaneous increase in modulus and impact resistance Polymers (Basel) 2020 12 2038 10.3390/polym12092038 Open DOI

[34] Qin, J., Shi, X.T., Li, H.Y., Zhao, R.F., Li, G.Q., Zhang, S.F., et al., Performance and failure process of green recycling solutions for preparing high degradation resistance coating on biomedical magnesium alloys, Green. Chem., 2022, 24: 8113–8130. 10.1039/d2gc02638d Qin J. Shi X.T. Li H.Y. Zhao R.F. Li G.Q. Zhang S.F. Performance and failure process of green recycling solutions for preparing high degradation resistance coating on biomedical magnesium alloys Green. Chem. 2022 24 8113 8130 10.1039/d2gc02638d Open DOI

[35] Zhang, W., Feng, B., Huang, L., Liang, Y., Chen, J., Li, X., et al., Fe/Cu diatomic sites dispersed on nitrogen-doped mesoporous carbon for the boosted oxygen reduction reaction in Mg-air and Zn-air batteries, App. Catal. B Environ. Energy, 2024, 358: 124450. 10.1016/j.apcatb.2024.124450 Zhang W. Feng B. Huang L. Liang Y. Chen J. Li X. Fe/Cu diatomic sites dispersed on nitrogen-doped mesoporous carbon for the boosted oxygen reduction reaction in Mg-air and Zn-air batteries App. Catal. B Environ. Energy 2024 358 124450 10.1016/j.apcatb.2024.124450 Open DOI

[36] Liang, Y, Ding, W, Liu, G, Traub, J, Gu, Z., Interlaced stacked hollow Cu2O dendrite for stable lithium metal anode, Solid State Ionics, 2024, 410: 116530. 10.1016/j.ssi.2024.116530 Liang Y Ding W Liu G Traub J Gu Z. Interlaced stacked hollow Cu₂O dendrite for stable lithium metal anode Solid State Ionics 2024 410 116530 10.1016/j.ssi.2024.116530 Open DOI

[37] Li, J.Y., Shi, H.W., Liu, F.C., Han, E.H., Self-healing epoxy coating based on tung oil-containing microcapsules for corrosion protection, Prog. Org. Coat., 2021, 156: 106236. 10.1016/j.porgcoat.2021.106236 Li J.Y. Shi H.W. Liu F.C. Han E.H. Self-healing epoxy coating based on tung oil-containing microcapsules for corrosion protection Prog. Org. Coat. 2021 156 106236 10.1016/j.porgcoat.2021.106236 Open DOI

[38] Alam, M.A., Samad, U.A., Abdo, H.S., Anis, A., Alnaser, I.A., Hassan, A, et al., Fabrication of hybrid epoxy composites (Joint compound adhesive) for aluminum substrate applications and their evaluation for mechanical properties, ACS Omega, 2024 9(38): 39452–39463. 10.1021/acsomega.4c02971 Alam M.A. Samad U.A. Abdo H.S. Anis A. Alnaser I.A. Hassan A Fabrication of hybrid epoxy composites (Joint compound adhesive) for aluminum substrate applications and their evaluation for mechanical properties ACS Omega 2024 9 38 39452 39463 10.1021/acsomega.4c02971 Open DOI

[39] Samad, U.A., Alam, M.A., Abdo, H.S., Anis, A., Al-Zahrani, S.M., 2023. Synergistic effect of nanoparticles: enhanced mechanical and corrosion protection properties of epoxy coatings incorporated with SiO2 and ZrO2, Polymers, 15(14): 3100. 10.3390/polym15143100 Samad U.A. Alam M.A. Abdo H.S. Anis A. Al-Zahrani S.M. 2023 Synergistic effect of nanoparticles: enhanced mechanical and corrosion protection properties of epoxy coatings incorporated with SiO₂ and ZrO₂ Polymers 15 14 3100 10.3390/polym15143100 Open DOI

[40] Samad, U.A., Alam, M.A., Anis, A., Abdo, H.S., Shaikh, H., Al-Zahrani, S.M., 2022. Nanomechanical and electrochemical properties of ZnO-nanoparticle-filled epoxy coatings, Coatings, 12(2): 282. 10.3390/coatings12020282 Samad U.A. Alam M.A. Anis A. Abdo H.S. Shaikh H. Al-Zahrani S.M. 2022 Nanomechanical and electrochemical properties of ZnO-nanoparticle-filled epoxy coatings Coatings 12 2 282 10.3390/coatings12020282 Open DOI

[41] Alam, M.A., Samad, U.A., Anis, A., Sherif, E.-S.M., Abdo, H.S., Al-Zahrani, S.M., 2023. The effect of zirconia nanoparticles on thermal, mechanical, and corrosion behavior of nanocomposite epoxy coatings on steel substrates, Materials, 16(13): 4813. 10.3390/ma16134813 Alam M.A. Samad U.A. Anis A. Sherif E.-S.M. Abdo H.S. Al-Zahrani S.M. 2023 The effect of zirconia nanoparticles on thermal, mechanical, and corrosion behavior of nanocomposite epoxy coatings on steel substrates Materials 16 13 4813 10.3390/ma16134813 Open DOI

[42] Fan, L., Tang, F.J., Reis, S.T., Chen, G.D., Koenigstein, M.L., Corrosion resistances of steel pipe internally coated with enamel, Corrosion, 2017, 73: 1335–1345. 10.5006/2497 Fan L. Tang F.J. Reis S.T. Chen G.D. Koenigstein M.L. Corrosion resistances of steel pipe internally coated with enamel Corrosion 2017 73 1335 1345 10.5006/2497 Open DOI

[43] Fan, L., Reis, S.T., Chen, G.D., Koenigstein, M.L., Corrosion resistance of pipeline steel with damaged enamel coating and cathodic protection, Coatings, 2018, 8: 185. 10.3390/coatings8050185 Fan L. Reis S.T. Chen G.D. Koenigstein M.L. Corrosion resistance of pipeline steel with damaged enamel coating and cathodic protection Coatings 2018 8 185 10.3390/coatings8050185 Open DOI

[44] Mayne J.E.O., The mechanism of the inhibition of the corrosion of iron and steel by means of paint, Official Digest, 1952, 24: 127 Mayne J.E.O. The mechanism of the inhibition of the corrosion of iron and steel by means of paint Official Digest 1952 24 127 Search in Google Scholar

[45] Davis, G.D., Krebs, L.A., Dacres, C.M., Coating evaluation and validation of accelerated test conditions using an in-situ corrosion sensor, J. Coating. Technol., 2002, 74: 69–74. 10.1007/Bf02697959 Davis G.D. Krebs L.A. Dacres C.M. Coating evaluation and validation of accelerated test conditions using an in-situ corrosion sensor J. Coating. Technol. 2002 74 69 74 10.1007/Bf02697959 Open DOI

[46] Zhang, T.Y., Zhang, T., He, Y.T., Wang, Y.C., Bi, Y.P., Corrosion and aging of organic aviation coatings: A review, Chin. J. Aeronaut., 2023, 36: 1–35. 10.1016/j.cja.2022.12.003 Zhang T.Y. Zhang T. He Y.T. Wang Y.C. Bi Y.P. Corrosion and aging of organic aviation coatings: A review Chin. J. Aeronaut. 2023 36 1 35 10.1016/j.cja.2022.12.003 Open DOI

[47] Changkai, W., Tianyu, Z., Teng, Z., Yuting, H., Yuchen, W., Guoming, C., Deterioration behavior of graphene-modified epoxy-primer-coated aluminum alloy in a UVA acidic alternation immersion environment, J. Alloy. Compd., 2023, 968: 171853. 10.1016/j.jallcom.2023.171853 Changkai W. Tianyu Z. Teng Z. Yuting H. Yuchen W. Guoming C. Deterioration behavior of graphene-modified epoxy-primer-coated aluminum alloy in a UVA acidic alternation immersion environment J. Alloy. Compd. 2023 968 171853 10.1016/j.jallcom.2023.171853 Open DOI