Comparative analysis of microstructure and selected properties of WC-Co-Cr coatings sprayed by high-velocity oxy fuel on S235 and AZ31 substrates

[1] Fotovvati B, Namdari N, Dehghanghadikolaei A. On coating techniques for surface protection: a review. JMMP. 2019;3:28. doi: 10.3390/jmmp3010028 Fotovvati B Namdari N Dehghanghadikolaei A. On coating techniques for surface protection: a review . JMMP . 2019 ; 3 : 28 . doi: 10.3390/jmmp3010028 Open DOISearch in Google Scholar

[2] Ramezani M, Mohd Ripin Z, Pasang T, Jiang C-P. Surface engineering of metals: techniques, characterizations and applications. Metals. 2023;13:1299. doi: 10.3390/met13071299 Ramezani M Mohd Ripin Z Pasang T Jiang C-P. Surface engineering of metals: techniques, characterizations and applications . Metals . 2023 ; 13 : 1299 . doi: 10.3390/met13071299 Open DOISearch in Google Scholar

[3] Fauchais PL, Heberlein JVR, Boulos MI. Thermal spray fundamentals. Boston, MA: Springer US; 2014. doi: 10. 1007/978-0-387-68991-3 Fauchais PL Heberlein JVR Boulos MI. Thermal spray fundamentals . Boston, MA : Springer US ; 2014 . doi: 10. 1007/978-0-387-68991-3 Open DOISearch in Google Scholar

[4] Ahmed R, Ali O, Berndt CC, Fardan A. Sliding wear of conventional and suspension sprayed nanocomposite WC-Co coatings: an invited review. J Therm Spray Tech. 2021;30:800–61. doi: 10.1007/s11666-021-01185-z Ahmed R Ali O Berndt CC Fardan A. Sliding wear of conventional and suspension sprayed nanocomposite WC-Co coatings: an invited review . J Therm Spray Tech . 2021 ; 30 : 800 – 61 . doi: 10.1007/s11666-021-01185-z Open DOISearch in Google Scholar

[5] El Rayes MM, Abdo HS, Khalil KA. Erosion—corrosion of cermet coating. Int J Electrochem Sci. 2013;8:1117–37. doi: 10.1016/S1452-3981(23)14085-5 El Rayes MM Abdo HS Khalil KA. Erosion—corrosion of cermet coating . Int J Electrochem Sci . 2013 ; 8 : 1117 – 37 . doi: 10.1016/S1452-3981(23)14085-5 Open DOISearch in Google Scholar

[6] Liu S, Mei L, Shen M, Xia J, Xiao Y, Zhao H, et al. Effect of initial kinetic energy of Si3N4 ball on Iimpact wear behavior of high-velocity oxygen fuelzprayed WC-10Co-4Cr coating and medium-carbon steel. J Mater Eng Perform. 2023;32:7285–96. doi: 10.1007/s11665-022-07633-3 Liu S Mei L Shen M Xia J Xiao Y Zhao H Effect of initial kinetic energy of Si3N4 ball on Iimpact wear behavior of high-velocity oxygen fuelzprayed WC-10Co-4Cr coating and medium-carbon steel . J Mater Eng Perform . 2023 ; 32 : 7285 – 96 . doi: 10.1007/s11665-022-07633-3 Open DOISearch in Google Scholar

[7] Kumar N, Choubey VK. Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour and microstructure characteristics at 650 degrees celsius. Surf Coat Tech. 2023;469:129812. doi: 10.1016/j.surfcoat.2023.129812 Kumar N Choubey VK. Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour and microstructure characteristics at 650 degrees celsius . Surf Coat Tech . 2023 ; 469 : 129812 . doi: 10.1016/j.surfcoat.2023.129812 Open DOISearch in Google Scholar

[8] Wang H, Wu Y, Cheng J, Zhu S, Cao M, Hong S. Effect of binder phases on the cavitation erosion behavior of HVOF sprayed WC-based coatings. Surf Coat Tech. 2023;472:129887. doi: 10.1016/j.surfcoat.2023.12 9887 Wang H Wu Y Cheng J Zhu S Cao M Hong S. Effect of binder phases on the cavitation erosion behavior of HVOF sprayed WC-based coatings . Surf Coat Tech . 2023 ; 472 : 129887 . doi: 10.1016/j.surfcoat.2023.12 9887 Open DOISearch in Google Scholar

[9] Lima RS, Marple BR. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review. J Therm Spray Tech. 2007;16:40–63. doi: 10.1007/s11666-006-9010-7 Lima RS Marple BR. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review . J Therm Spray Tech . 2007 ; 16 : 40 – 63 . doi: 10.1007/s11666-006-9010-7 Open DOISearch in Google Scholar

[10] Fauchais P, Montavon G, Lima RS, Marple BR. Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review. J Phys D: Appl Phys. 2011;44:093001. doi: 10.1088/0022-3727/44/9/093001 Fauchais P Montavon G Lima RS Marple BR. Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review . J Phys D: Appl Phys . 2011 ; 44 : 093001 . doi: 10.1088/0022-3727/44/9/093001 Open DOISearch in Google Scholar

[11] Galedari SA, Mahdavi A, Azarmi F, Huang Y, McDonald A. A comprehensive review of corrosion resistance of thermally-sprayed and thermally-diffused protective coatings on steel structures. J Therm Spray Tech. 2019;28:645–77. doi: 10.1007/s11666-019-00855-3 Galedari SA Mahdavi A Azarmi F Huang Y McDonald A. A comprehensive review of corrosion resistance of thermally-sprayed and thermally-diffused protective coatings on steel structures . J Therm Spray Tech . 2019 ; 28 : 645 – 77 . doi: 10.1007/s11666-019-00855-3 Open DOISearch in Google Scholar

[12] Joshi, N. Advanced coatings by thermal spray processes. Technologies. 2019;7:79. doi: 10.3390/technologies7040079 Joshi N. Advanced coatings by thermal spray processes . Technologies . 2019 ; 7 : 79 . doi: 10.3390/technologies7040079 Open DOISearch in Google Scholar

[13] Tatka L, Pawłowski L, Winnicki M, SokołowskiP, Małachowska A, Kozerski S. Review of functionally graded thermal sprayed coatings. Appl Sci. 2020;10:5153. doi: 10.3390/app10155153 Tatka L Pawłowski L Winnicki M Sokołowski P Małachowska A Kozerski S. Review of functionally graded thermal sprayed coatings . Appl Sci . 2020 ; 10 : 5153 . doi: 10.3390/app10155153 Open DOISearch in Google Scholar

[14] Toma D, Brandl W, Marginean G. Wear and corrosion behaviour of thermally sprayed cermet coatings. Surf Coat Tech. 2001;138:149–58. doi: 10.1016/S0257-8972(00)01141-5 Toma D Brandl W Marginean G. Wear and corrosion behaviour of thermally sprayed cermet coatings . Surf Coat Tech . 2001 ; 138 : 149 – 58 . doi: 10.1016/S0257-8972(00)01141-5 Open DOISearch in Google Scholar

[15] Dent AH, Depalo S, Sampath S. Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents. J Therm Spray Technol. 2002;11:551–8. doi: 10.1361/105996302770348691 Dent AH Depalo S Sampath S. Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents . J Therm Spray Technol . 2002 ; 11 : 551 – 8 . doi: 10.1361/105996302770348691 Open DOISearch in Google Scholar

[16] Hayat MD, Singh H, He Z, Cao P. Titanium metal matrix composites: an overview. Compos A - Appl Sci Manuf. 2019;121:418–38. doi: 10.1016/j.compositesa.2019.04.005 Hayat MD Singh H He Z Cao P. Titanium metal matrix composites: an overview . Compos A - Appl Sci Manuf . 2019 ; 121 : 418 – 38 . doi: 10.1016/j.compositesa.2019.04.005 Open DOISearch in Google Scholar

[17] Sadeghi B, Cavaliere P, Pruncu CI, Balog M, Marques De Castro M, Chahal R. Architectural design of advanced aluminum matrix composites: a review of recent developments. Crit Rev Solid State Mater Sci. 2024;49:1–71. doi: 10.1080/10408436.2022.2078277 Sadeghi B Cavaliere P Pruncu CI Balog M Marques De Castro M Chahal R. Architectural design of advanced aluminum matrix composites: a review of recent developments . Crit Rev Solid State Mater Sci . 2024 ; 49 : 1 – 71 . doi: 10.1080/10408436.2022.2078277 Open DOISearch in Google Scholar

[18] Mazaheri Y, Khodaveysi E, Roknian M, Sheikhi M, Heidarpour A. 75Cr3C2-25NiCr and 86WC-10Co-4Cr high wear- and corrosion-resistant cermet coatings deposited on A356 substrate by high-velocity oxyfuel technique. Coatings. 2022;12:1408. doi: 10.3390/coatings12101408 Mazaheri Y Khodaveysi E Roknian M Sheikhi M Heidarpour A. 75Cr3C2-25NiCr and 86WC-10Co-4Cr high wear- and corrosion-resistant cermet coatings deposited on A356 substrate by high-velocity oxyfuel technique . Coatings . 2022 ; 12 : 1408 . doi: 10.3390/coatings12101408 Open DOISearch in Google Scholar

[19] Jiang H, Zhao X, Song H, Li C. The effect of high-velocity air-fuel WC-12Co coatings on the wear and corrosion resistance of TC18 titanium alloy. Coatings. 2023;13:755. doi: 10.3390/coatings13040755 Jiang H Zhao X Song H Li C. The effect of high-velocity air-fuel WC-12Co coatings on the wear and corrosion resistance of TC18 titanium alloy . Coatings . 2023 ; 13 : 755 . doi: 10.3390/coatings13040755 Open DOISearch in Google Scholar

[20] Tan J, Ramakrishna S. Applications of magnesium and its alloys: a review. Appl Sci. 2021;11:6861. doi: 10.3390/app11156861 Tan J Ramakrishna S. Applications of magnesium and its alloys: a review . Appl Sci . 2021 ; 11 : 6861 . doi: 10.3390/app11156861 Open DOISearch in Google Scholar

[21] Morelli S, Rombolà G, Bolelli G, Lopresti M, Puddu P, Boccaleri E, et al. Hard ultralight systems by thermal spray deposition of WC-CoCr onto AZ31 magnesium alloy. Surf Coat Technol. 2022;451:129056. doi: 10.1016/j.surfcoat.2022.129056 Morelli S Rombolà G Bolelli G Lopresti M Puddu P Boccaleri E Hard ultralight systems by thermal spray deposition of WC-CoCr onto AZ31 magnesium alloy . Surf Coat Technol . 2022 ; 451 : 129056 . doi: 10.1016/j.surfcoat.2022.129056 Open DOISearch in Google Scholar

[22] Parco M, Zhao L, Zwick J, Bobzin K, Lugscheider E. Investigation of HVOF spraying on magnesium alloys. Surf Coat Technol. 2006;201:3269–74. doi: 10.1016/j.surfcoat.2006.06.047 Parco M Zhao L Zwick J Bobzin K Lugscheider E. Investigation of HVOF spraying on magnesium alloys . Surf Coat Technol . 2006 ; 201 : 3269 – 74 . doi: 10.1016/j.surfcoat.2006.06.047 Open DOISearch in Google Scholar

[23] Yıldız F. Tribological properties of WC-12Co coating on AZ91 magnesium alloy fabricated by high velocity oxyfuel spray. High Temp Mater Proc. 2014;33:41–8. doi: 10.1515/htmp-2013-0018 Yıldız F. Tribological properties of WC-12Co coating on AZ91 magnesium alloy fabricated by high velocity oxyfuel spray . High Temp Mater Proc . 2014 ; 33 : 41 – 8 . doi: 10.1515/htmp-2013-0018 Open DOISearch in Google Scholar

[24] Jonda E, Szala M, Sroka M, Łatka L, Walczak M. Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying. Appl Surf Sci. 2023;608:155071. doi: 10.1016/j.apsusc. 2022.155071 Jonda E Szala M Sroka M Łatka L Walczak M. Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying . Appl Surf Sci . 2023 ; 608 : 155071 . doi: 10.1016/j.apsusc. 2022.155071 Open DOISearch in Google Scholar

[25] Berger L-M, Ettmayer P, Vuoristo P, Mäntylä T, Kunert W. Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: part 1. powder characterization. J Therm Spray Technol. 2001;10:311–25. doi: 10.1361/105996301770349402 Berger L-M Ettmayer P Vuoristo P Mäntylä T Kunert W. Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: part 1. powder characterization . J Therm Spray Technol . 2001 ; 10 : 311 – 25 . doi: 10.1361/105996301770349402 Open DOISearch in Google Scholar

[26] Sidhu TS, Prakash S, Agrawal RD. Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications. Mater Sci. 2005;41:805–23. doi: 10.1007/s11003-006-0047-z Sidhu TS Prakash S Agrawal RD. Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications . Mater Sci . 2005 ; 41 : 805 – 23 . doi: 10.1007/s11003-006-0047-z Open DOISearch in Google Scholar

[27] Feitosa FRP, Gomes RM, Silva MMR, De Lima SJG, Dubois JM. Effect of oxygen/fuel ratio on the microstructure and properties of HVOF-sprayed Al59Cu25.5Fe12.5B3 quasicrystalline coatings. Surf Coat Technol. 2018;353:171–8. doi: 10.1016/j.surfcoat.2018.08.081 Feitosa FRP Gomes RM Silva MMR De Lima SJG Dubois JM. Effect of oxygen/fuel ratio on the microstructure and properties of HVOF-sprayed Al59Cu25.5Fe12.5B3 quasicrystalline coatings . Surf Coat Technol . 2018 ; 353 : 171 – 8 . doi: 10.1016/j.surfcoat.2018.08.081 Open DOISearch in Google Scholar

[28] Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19:3–20. doi: 10.1557/jmr.2004.19.1.3 Oliver WC Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology . J Mater Res . 2004 ; 19 : 3 – 20 . doi: 10.1557/jmr.2004.19.1.3 Open DOISearch in Google Scholar

[29] Tricoteaux A, Duarte G, Chicot D, Le Bourhis E, Bemporad E, Lesage J. Depth-sensing indentation modeling for determination of elastic modulus of thin films. Mech Mater. 2010;42:166–74. doi: 10.1016/j.mechmat.2009.11.016 Tricoteaux A Duarte G Chicot D Le Bourhis E Bemporad E Lesage J. Depth-sensing indentation modeling for determination of elastic modulus of thin films . Mech Mater . 2010 ; 42 : 166 – 74 . doi: 10.1016/j.mechmat.2009.11.016 Open DOISearch in Google Scholar

[30] Łatka L, Chicot D, Cattini A, Pawłowski L, Ambroziak A. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surf Coat Technol. 2013;220:131–9. doi: 10.1016/j.surfcoat.2012.07.025 Łatka L Chicot D Cattini A Pawłowski L Ambroziak A. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings . Surf Coat Technol . 2013 ; 220 : 131 – 9 . doi: 10.1016/j.surfcoat.2012.07.025 Open DOISearch in Google Scholar

[31] Evans AG, Wilshaw TR. Quasi-static solid particle damage in brittle solids—I. observations analysis and implications. Acta Metall. 1976;24:939–56. doi: 10.1016/0001-6160(76)90042-0 Evans AG Wilshaw TR. Quasi-static solid particle damage in brittle solids—I. observations analysis and implications . Acta Metall . 1976 ; 24 : 939 – 56 . doi: 10.1016/0001-6160(76)90042-0 Open DOISearch in Google Scholar

[32] Liu Y, Fischer TE, Dent A. Comparison of HVOF and plasma-sprayed alumina/titania coatings— microstructure, mechanical properties and abrasion behavior. Surf Coat Technol. 2003;167:68–76. doi: 10.1016/S0257-8972(02)00890-3 Liu Y Fischer TE Dent A. Comparison of HVOF and plasma-sprayed alumina/titania coatings— microstructure, mechanical properties and abrasion behavior . Surf Coat Technol . 2003 ; 167 : 68 – 76 . doi: 10.1016/S0257-8972(02)00890-3 Open DOISearch in Google Scholar

[33] Murthy JKN, Rao DS, Venkataraman B. Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes. Wear. 2001;249:592–600. doi: 10.1016/S0043-1648(01)00682-2 Murthy JKN Rao DS Venkataraman B. Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes . Wear . 2001 ; 249 : 592 – 600 . doi: 10.1016/S0043-1648(01)00682-2 Open DOISearch in Google Scholar

[34] Agüero A, Camón F, García de Blas J, del Hoyo JC, Muelas R, Santaballa A, et al. HVOF-Deposited WCCoCr as replacement for hard Cr in landing gear actuators. J Therm Spray Tech. 2011;20:1292–309. doi: 10.1007/s11666-011-9686-1 Agüero A Camón F García de Blas J del Hoyo JC Muelas R Santaballa A HVOF-Deposited WCCoCr as replacement for hard Cr in landing gear actuators . J Therm Spray Tech . 2011 ; 20 : 1292 – 309 . doi: 10.1007/s11666-011-9686-1 Open DOISearch in Google Scholar

[35] Ding X, Ke D, Yuan C, Ding Z, Cheng X. Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC. Coatings. 2018;8:307. doi: 10.3390/coatings8090307 Ding X Ke D Yuan C Ding Z Cheng X. Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC . Coatings . 2018 ; 8 : 307 . doi: 10.3390/coatings8090307 Open DOISearch in Google Scholar

[36] Zhang S-H, Cho T-Y, Yoon J-H, Li M-X, Shum PW, Kwon S-C. Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment. Mater Sci Eng B. 2009;162:127–34. doi: 10.1016/j.mseb.2009.03.017 Zhang S-H Cho T-Y Yoon J-H Li M-X Shum PW Kwon S-C. Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment . Mater Sci Eng B . 2009 ; 162 : 127 – 34 . doi: 10.1016/j.mseb.2009.03.017 Open DOISearch in Google Scholar

[37] Karaoglanli AC, Oge M, Doleker KM, Hotamis M. Comparison of tribological properties of HVOF sprayed coatings with different composition. Surf Coat Technol. 2017;318:299–308. doi: 10.1016/j.surfcoat.2017.02.021 Karaoglanli AC Oge M Doleker KM Hotamis M. Comparison of tribological properties of HVOF sprayed coatings with different composition . Surf Coat Technol . 2017 ; 318 : 299 – 308 . doi: 10.1016/j.surfcoat.2017.02.021 Open DOISearch in Google Scholar

[38] Hong S, Wu Y, Wang B, Lin J. Improvement in tribological properties of Cr12MoV cold work die steel by HVOF sprayed WC-CoCr cermet coatings. Coatings. 2019;9:825. doi: 10.3390/coatings9120825 Hong S Wu Y Wang B Lin J. Improvement in tribological properties of Cr12MoV cold work die steel by HVOF sprayed WC-CoCr cermet coatings . Coatings . 2019 ; 9 : 825 . doi: 10.3390/coatings9120825 Open DOISearch in Google Scholar

[39] Qiao L, Wu Y, Hong S, Long W, Cheng J. Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying. Ceram Int. 2021;47:1829–36. doi: 10.1016/j.ceramint.2020.09.009 Qiao L Wu Y Hong S Long W Cheng J. Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying . Ceram Int . 2021 ; 47 : 1829 – 36 . doi: 10.1016/j.ceramint.2020.09.009 Open DOISearch in Google Scholar

[40] Taheri M, Valefi Z, Zangeneh-Madar K. Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings. Surf Eng. 2012;28:266–72. doi: 10.1179/1743294411Y.0000000024 Taheri M Valefi Z Zangeneh-Madar K. Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings . Surf Eng . 2012 ; 28 : 266 – 72 . doi: 10.1179/1743294411Y.0000000024 Open DOISearch in Google Scholar

[41] Priyan MS, Azad A, Araffath SY. Influence of HVOF parameters on the wear resistance of Cr3C2-NiCr coating. J Mat Sci Surf Eng. 2016;4:6. Priyan MS Azad A Araffath SY. Influence of HVOF parameters on the wear resistance of Cr3C2-NiCr coating . J Mat Sci Surf Eng . 2016 ; 4 : 6 . Search in Google Scholar

[42] Hong S, Wu YP, Gao WW, Wang B, Guo WM, Lin JR. Microstructural characterisation and microhardness distribution of HVOF sprayed WC–10Co–4Cr coating. Surf Eng. 2014;30:53–8. doi: 10.1179/1743294413Y.0000000184 Hong S Wu YP Gao WW Wang B Guo WM Lin JR. Microstructural characterisation and microhardness distribution of HVOF sprayed WC–10Co–4Cr coating . Surf Eng . 2014 ; 30 : 53 – 8 . doi: 10.1179/1743294413Y.0000000184 Open DOISearch in Google Scholar

[43] Song B, Murray JW, Wellman RG, Pala Z, Hussain T. Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings. Wear. 2020;442–443:203114. doi: 10.1016/j.wear.2019.203114 Song B Murray JW Wellman RG Pala Z Hussain T. Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings . Wear . 2020 ; 442–443 : 203114 . doi: 10.1016/j.wear.2019.203114 Open DOISearch in Google Scholar

[44] Murugan K, Ragupathy A, Balasubramanian V, Sridhar K. Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC–10Co–4Cr coatings. Surf Coat Technol. 2014;247:90–102. doi: 10.1016/j.surfcoat.2014.03.022 Murugan K Ragupathy A Balasubramanian V Sridhar K. Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC–10Co–4Cr coatings . Surf Coat Technol . 2014 ; 247 : 90 – 102 . doi: 10.1016/j.surfcoat.2014.03.022 Open DOISearch in Google Scholar

[45] Mishra TK, Kumar A, Sinha SK. Experimental investigation and study of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coating on its sliding wear behaviour. Int J Refract Metals Hard Mater. 2021;94:105404. doi: 10.1016/j.ijrmhm.2020.105404 Mishra TK Kumar A Sinha SK. Experimental investigation and study of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coating on its sliding wear behaviour . Int J Refract Metals Hard Mater . 2021 ; 94 : 105404 . doi: 10.1016/j.ijrmhm.2020.105404 Open DOISearch in Google Scholar

[46] Luiz LA, de Andrade J, Pesqueira CM, Siqueira IB de AF, Sucharski GB, de Sousa MJ. Corrosion behavior and galvanic corrosion resistance of WC and Cr3C2 cermet coatings in madeira river water. J Therm Spray Tech. 2021;30:205–21. doi: 10.1007/s11666-021-01152-8 Luiz LA de Andrade J Pesqueira CM Siqueira IB de AF Sucharski GB de Sousa MJ. Corrosion behavior and galvanic corrosion resistance of WC and Cr3C2 cermet coatings in madeira river water . J Therm Spray Tech . 2021 ; 30 : 205 – 21 . doi: 10.1007/s11666-021-01152-8 Open DOISearch in Google Scholar

[47] Picas JA, Punset M, Baile MT, Martín E, Forn A. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings. Surf Coat Technol. 2011;205:S364–8. doi: 10.1016/j.surfcoat.2011.03.129 Picas JA Punset M Baile MT Martín E Forn A. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings . Surf Coat Technol . 2011 ; 205 : S364 – 8 . doi: 10.1016/j.surfcoat.2011.03.129 Open DOISearch in Google Scholar

[48] Ishikawa Y, Kawakita J, Osawa S, Itsukaichi T, Sakamoto Y, Takaya M, et al. Evaluation of corrosion and wear resistance of hard cermet coatings sprayed by using an improved HVOF process. J Therm Spray Technol. 2005;14:384–90. doi: 10.1361/105996305X59378 Ishikawa Y Kawakita J Osawa S Itsukaichi T Sakamoto Y Takaya M Evaluation of corrosion and wear resistance of hard cermet coatings sprayed by using an improved HVOF process . J Therm Spray Technol . 2005 ; 14 : 384 – 90 . doi: 10.1361/105996305X59378 Open DOISearch in Google Scholar

[49] Pulsford J, Kamnis S, Murray J, Bai M, Hussain T. Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear. J Therm Spray Tech. 2018;27:207–19. doi: 10.1007/s11666-017-0669-8 Pulsford J Kamnis S Murray J Bai M Hussain T. Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear . J Therm Spray Tech . 2018 ; 27 : 207 – 19 . doi: 10.1007/s11666-017-0669-8 Open DOISearch in Google Scholar

[50] Komarov P, Jech D, Tkachenko S, Slámeèka K, Dvoøák K, Èelko L. Wetting behavior of wear-resistant WC-Co-Cr cermet coatings produced by HVOF: the role of chemical composition and surface roughness. J Therm Spray Tech. 2021;30:285–303. doi: 10.1007/s11666-020-01130-6 Komarov P Jech D Tkachenko S Slámeèka K Dvoøák K Èelko L. Wetting behavior of wear-resistant WC-Co-Cr cermet coatings produced by HVOF: the role of chemical composition and surface roughness . J Therm Spray Tech . 2021 ; 30 : 285 – 303 . doi: 10.1007/s11666-020-01130-6 Open DOISearch in Google Scholar

[51] Lyphout C, Sato K. Screening design of hard metal feedstock powders for supersonic air fuel processing. Surf Coat Technol. 2014;258:447–57. doi: 10.1016/j.surfcoat.2014.08.055 Lyphout C Sato K. Screening design of hard metal feedstock powders for supersonic air fuel processing . Surf Coat Technol . 2014 ; 258 : 447 – 57 . doi: 10.1016/j.surfcoat.2014.08.055 Open DOISearch in Google Scholar

[52] Górnik M, Jonda E, Łatka L, Nowakowska M, Godzierz M. Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings. MaterSci-Poland. 2021;39:545–54. doi: 10.2478/msp-2021-0047 Górnik M Jonda E Łatka L Nowakowska M Godzierz M. Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings . MaterSci-Poland . 2021 ; 39 : 545 – 54 . doi: 10.2478/msp-2021-0047 Open DOISearch in Google Scholar

[53] Venturi F, Kamnis S, Hussain T. Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings. Mater Design. 2021;202:109566. doi: 10.1016/j.matdes.2021.109566 Venturi F Kamnis S Hussain T. Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings . Mater Design . 2021 ; 202 : 109566 . doi: 10.1016/j.matdes.2021.109566 Open DOISearch in Google Scholar

[54] Picas JA, Rupérez E, Punset M, Forn A. Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment. Surf Coat Technol. 2013;225:47–57. doi: 10.1016/j.surfcoat.2013.03.015 Picas JA Rupérez E Punset M Forn A. Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment . Surf Coat Technol . 2013 ; 225 : 47 – 57 . doi: 10.1016/j.surfcoat.2013.03.015 Open DOISearch in Google Scholar

[55] Patterson AL. The Scherrer formula for X-ray particle size determination. Phys Rev. 1939;56:978–82. doi: 10.1103/PhysRev.56.978 Patterson AL. The Scherrer formula for X-ray particle size determination . Phys Rev . 1939 ; 56 : 978 – 82 . doi: 10.1103/PhysRev.56.978 Open DOISearch in Google Scholar

[56] Tillmann W, Hagen L, Stangier D, Paulus M, Tolan M, Sakrowski R, et al. Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. Surf Coat Technol. 2019;374:448–59. doi: 10.1016/j.surfcoat.2019.06.012 Tillmann W Hagen L Stangier D Paulus M Tolan M Sakrowski R Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings . Surf Coat Technol . 2019 ; 374 : 448 – 59 . doi: 10.1016/j.surfcoat.2019.06.012 Open DOISearch in Google Scholar

[57] Kishore Mishra T, Kumar A, Sinha S, Sharma S. Investigation of sliding wear behaviour of HVOF carbide coating. Mater Today Proc. 2018;5:19539–46. doi: 10.1016/j.matpr.2018.06.315 Kishore Mishra T Kumar A Sinha S Sharma S. Investigation of sliding wear behaviour of HVOF carbide coating . Mater Today Proc . 2018 ; 5 : 19539 – 46 . doi: 10.1016/j.matpr.2018.06.315 Open DOISearch in Google Scholar

[58] Eßler J, Woelk D, Utu D, Marginean G. Influence of the powder feed rate on the properties of HVOF sprayed WC-based cermet coatings. Mater Today Proc. 2023;78:227–34. doi: 10.1016/j.matpr.2022.11.120 Eßler J Woelk D Utu D Marginean G. Influence of the powder feed rate on the properties of HVOF sprayed WC-based cermet coatings . Mater Today Proc . 2023 ; 78 : 227 – 34 . doi: 10.1016/j.matpr.2022.11.120 Open DOISearch in Google Scholar

[59] Rayón E, Bonache V, Salvador MD, Roa JJ, Sánchez E. Hardness and Young’s modulus distributions in atmospheric plasma sprayed WC–Co coatings using nanoindentation. Surf Coat Technol. 2011;205:4192–7. doi: 10.1016/j.surfcoat.2011.03.012 Rayón E Bonache V Salvador MD Roa JJ Sánchez E. Hardness and Young’s modulus distributions in atmospheric plasma sprayed WC–Co coatings using nanoindentation . Surf Coat Technol . 2011 ; 205 : 4192 – 7 . doi: 10.1016/j.surfcoat.2011.03.012 Open DOISearch in Google Scholar

[60] Duszová A, Halgaš R, Bl’anda M, Hvizdoš P, Lofaj F, Dusza J, et al. Nanoindentation of WC–Co hardmetals. J Eur Ceram Soc. 2013;33:2227–32. doi: 10.1016/j.jeurceramsoc.2012.12.018 Duszová A Halgaš R Bl’anda M Hvizdoš P Lofaj F Dusza J Nanoindentation of WC–Co hardmetals . J Eur Ceram Soc . 2013 ; 33 : 2227 – 32 . doi: 10.1016/j.jeurceramsoc.2012.12.018 Open DOISearch in Google Scholar

[61] Wang H, Qiu Q, Gee M, Hou C, Liu X, Song X. Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder. Mater Design. 2020;191:108586. doi: 10.1016/j.matdes.2020.108586 Wang H Qiu Q Gee M Hou C Liu X Song X. Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder . Mater Design . 2020 ; 191 : 108586 . doi: 10.1016/j.matdes.2020.108586 Open DOISearch in Google Scholar

[62] Culha O, Toparli M, Celik E, Aksoy T, Soykan HS. Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder. Surf Coat Technol. 2009;203:2052–7. doi: 10.1016/j.surfcoat.2009.02.005 Culha O Toparli M Celik E Aksoy T Soykan HS. Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder . Surf Coat Technol . 2009 ; 203 : 2052 – 7 . doi: 10.1016/j.surfcoat.2009.02.005 Open DOISearch in Google Scholar

[63] Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková Š, et al. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. Surf Coat Technol. 2019;370:196–212. doi: 10.1016/j.surfcoat.2019.04.067 Matikainen V Rubio Peregrina S Ojala N Koivuluoto H Schubert J Houdková Š Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes . Surf Coat Technol . 2019 ; 370 : 196 – 212 . doi: 10.1016/j.surfcoat.2019.04.067 Open DOISearch in Google Scholar

[64] Pulsford J, Venturi F, Pala Z, Kamnis S, Hussain T. Application of HVOF WC-Co-Cr coatings on the internal surface of small cylinders: effect of internal diameter on the wear resistance. Wear. 2019;432–433:202965. doi: 10.1016/j.wear.2019.202965 Pulsford J Venturi F Pala Z Kamnis S Hussain T. Application of HVOF WC-Co-Cr coatings on the internal surface of small cylinders: effect of internal diameter on the wear resistance . Wear . 2019 ; 432–433 : 202965 . doi: 10.1016/j.wear.2019.202965 Open DOISearch in Google Scholar

[65] Baumann I, Hagen L, Tillmann W, Hollingsworth P, Stangier D, Schmidtmann G, et al. Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders. Surf Coat Technol. 2021;405:126716. doi: 10.1016/j.surfcoat.2020.126716 Baumann I Hagen L Tillmann W Hollingsworth P Stangier D Schmidtmann G Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders . Surf Coat Technol . 2021 ; 405 : 126716 . doi: 10.1016/j.surfcoat.2020.126716 Open DOISearch in Google Scholar

[66] Ma N, Guo L, Cheng Z,Wu H, Ye F, Zhang K. Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure. Appl Surf Sci. 2014;320:364–71. doi: 10.1016/j.apsusc.2014.09.081 Ma N Guo L Cheng Z Wu H Ye F Zhang K. Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure . Appl Surf Sci . 2014 ; 320 : 364 – 71 . doi: 10.1016/j.apsusc.2014.09.081 Open DOISearch in Google Scholar