This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Fotovvati B, Namdari N, Dehghanghadikolaei A. On coating techniques for surface protection: a review. JMMP. 2019;3:28. doi: 10.3390/jmmp3010028FotovvatiBNamdariNDehghanghadikolaeiA.On coating techniques for surface protection: a review. . 2019;3:28. doi: 10.3390/jmmp3010028Open DOISearch in Google Scholar
Ramezani M, Mohd Ripin Z, Pasang T, Jiang C-P. Surface engineering of metals: techniques, characterizations and applications. Metals. 2023;13:1299. doi: 10.3390/met13071299RamezaniMMohd RipinZPasangTJiangC-P.Surface engineering of metals: techniques, characterizations and applications. . 2023;13:1299. doi: 10.3390/met13071299Open DOISearch in Google Scholar
Ahmed R, Ali O, Berndt CC, Fardan A. Sliding wear of conventional and suspension sprayed nanocomposite WC-Co coatings: an invited review. J Therm Spray Tech. 2021;30:800–61. doi: 10.1007/s11666-021-01185-zAhmedRAliOBerndtCCFardanA.Sliding wear of conventional and suspension sprayed nanocomposite WC-Co coatings: an invited review. . 2021;30:800–61. doi: 10.1007/s11666-021-01185-zOpen DOISearch in Google Scholar
El Rayes MM, Abdo HS, Khalil KA. Erosion—corrosion of cermet coating. Int J Electrochem Sci. 2013;8:1117–37. doi: 10.1016/S1452-3981(23)14085-5El RayesMMAbdoHSKhalilKA.Erosion—corrosion of cermet coating. . 2013;8:1117–37. doi: 10.1016/S1452-3981(23)14085-5Open DOISearch in Google Scholar
Liu S, Mei L, Shen M, Xia J, Xiao Y, Zhao H, et al. Effect of initial kinetic energy of Si3N4 ball on Iimpact wear behavior of high-velocity oxygen fuelzprayed WC-10Co-4Cr coating and medium-carbon steel. J Mater Eng Perform. 2023;32:7285–96. doi: 10.1007/s11665-022-07633-3LiuSMeiLShenMXiaJXiaoYZhaoHEffect of initial kinetic energy of Si3N4 ball on Iimpact wear behavior of high-velocity oxygen fuelzprayed WC-10Co-4Cr coating and medium-carbon steel. . 2023;32:7285–96. doi: 10.1007/s11665-022-07633-3Open DOISearch in Google Scholar
Kumar N, Choubey VK. Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour and microstructure characteristics at 650 degrees celsius. Surf Coat Tech. 2023;469:129812. doi: 10.1016/j.surfcoat.2023.129812KumarNChoubeyVK.Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour and microstructure characteristics at 650 degrees celsius. . 2023;469:129812. doi: 10.1016/j.surfcoat.2023.129812Open DOISearch in Google Scholar
Wang H, Wu Y, Cheng J, Zhu S, Cao M, Hong S. Effect of binder phases on the cavitation erosion behavior of HVOF sprayed WC-based coatings. Surf Coat Tech. 2023;472:129887. doi: 10.1016/j.surfcoat.2023.12 9887WangHWuYChengJZhuSCaoMHongS.Effect of binder phases on the cavitation erosion behavior of HVOF sprayed WC-based coatings. . 2023;472:129887. doi: 10.1016/j.surfcoat.2023.12 9887Open DOISearch in Google Scholar
Lima RS, Marple BR. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review. J Therm Spray Tech. 2007;16:40–63. doi: 10.1007/s11666-006-9010-7LimaRSMarpleBR.Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review. . 2007;16:40–63. doi: 10.1007/s11666-006-9010-7Open DOISearch in Google Scholar
Fauchais P, Montavon G, Lima RS, Marple BR. Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review. J Phys D: Appl Phys. 2011;44:093001. doi: 10.1088/0022-3727/44/9/093001FauchaisPMontavonGLimaRSMarpleBR.Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review. . 2011;44:093001. doi: 10.1088/0022-3727/44/9/093001Open DOISearch in Google Scholar
Galedari SA, Mahdavi A, Azarmi F, Huang Y, McDonald A. A comprehensive review of corrosion resistance of thermally-sprayed and thermally-diffused protective coatings on steel structures. J Therm Spray Tech. 2019;28:645–77. doi: 10.1007/s11666-019-00855-3GaledariSAMahdaviAAzarmiFHuangYMcDonaldA.A comprehensive review of corrosion resistance of thermally-sprayed and thermally-diffused protective coatings on steel structures. . 2019;28:645–77. doi: 10.1007/s11666-019-00855-3Open DOISearch in Google Scholar
Joshi, N. Advanced coatings by thermal spray processes. Technologies. 2019;7:79. doi: 10.3390/technologies7040079JoshiN.Advanced coatings by thermal spray processes. . 2019;7:79. doi: 10.3390/technologies7040079Open DOISearch in Google Scholar
Tatka L, Pawłowski L, Winnicki M, SokołowskiP, Małachowska A, Kozerski S. Review of functionally graded thermal sprayed coatings. Appl Sci. 2020;10:5153. doi: 10.3390/app10155153TatkaLPawłowskiLWinnickiMSokołowskiPMałachowskaAKozerskiS.Review of functionally graded thermal sprayed coatings. . 2020;10:5153. doi: 10.3390/app10155153Open DOISearch in Google Scholar
Toma D, Brandl W, Marginean G. Wear and corrosion behaviour of thermally sprayed cermet coatings. Surf Coat Tech. 2001;138:149–58. doi: 10.1016/S0257-8972(00)01141-5TomaDBrandlWMargineanG.Wear and corrosion behaviour of thermally sprayed cermet coatings. . 2001;138:149–58. doi: 10.1016/S0257-8972(00)01141-5Open DOISearch in Google Scholar
Dent AH, Depalo S, Sampath S. Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents. J Therm Spray Technol. 2002;11:551–8. doi: 10.1361/105996302770348691DentAHDepaloSSampathS.Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents. . 2002;11:551–8. doi: 10.1361/105996302770348691Open DOISearch in Google Scholar
Hayat MD, Singh H, He Z, Cao P. Titanium metal matrix composites: an overview. Compos A - Appl Sci Manuf. 2019;121:418–38. doi: 10.1016/j.compositesa.2019.04.005HayatMDSinghHHeZCaoP.Titanium metal matrix composites: an overview. . 2019;121:418–38. doi: 10.1016/j.compositesa.2019.04.005Open DOISearch in Google Scholar
Sadeghi B, Cavaliere P, Pruncu CI, Balog M, Marques De Castro M, Chahal R. Architectural design of advanced aluminum matrix composites: a review of recent developments. Crit Rev Solid State Mater Sci. 2024;49:1–71. doi: 10.1080/10408436.2022.2078277SadeghiBCavalierePPruncuCIBalogMMarques De CastroMChahalR.Architectural design of advanced aluminum matrix composites: a review of recent developments. . 2024;49:1–71. doi: 10.1080/10408436.2022.2078277Open DOISearch in Google Scholar
Mazaheri Y, Khodaveysi E, Roknian M, Sheikhi M, Heidarpour A. 75Cr3C2-25NiCr and 86WC-10Co-4Cr high wear- and corrosion-resistant cermet coatings deposited on A356 substrate by high-velocity oxyfuel technique. Coatings. 2022;12:1408. doi: 10.3390/coatings12101408MazaheriYKhodaveysiERoknianMSheikhiMHeidarpourA.75Cr3C2-25NiCr and 86WC-10Co-4Cr high wear- and corrosion-resistant cermet coatings deposited on A356 substrate by high-velocity oxyfuel technique. . 2022;12:1408. doi: 10.3390/coatings12101408Open DOISearch in Google Scholar
Jiang H, Zhao X, Song H, Li C. The effect of high-velocity air-fuel WC-12Co coatings on the wear and corrosion resistance of TC18 titanium alloy. Coatings. 2023;13:755. doi: 10.3390/coatings13040755JiangHZhaoXSongHLiC.The effect of high-velocity air-fuel WC-12Co coatings on the wear and corrosion resistance of TC18 titanium alloy. . 2023;13:755. doi: 10.3390/coatings13040755Open DOISearch in Google Scholar
Tan J, Ramakrishna S. Applications of magnesium and its alloys: a review. Appl Sci. 2021;11:6861. doi: 10.3390/app11156861TanJRamakrishnaS.Applications of magnesium and its alloys: a review. . 2021;11:6861. doi: 10.3390/app11156861Open DOISearch in Google Scholar
Morelli S, Rombolà G, Bolelli G, Lopresti M, Puddu P, Boccaleri E, et al. Hard ultralight systems by thermal spray deposition of WC-CoCr onto AZ31 magnesium alloy. Surf Coat Technol. 2022;451:129056. doi: 10.1016/j.surfcoat.2022.129056MorelliSRombolàGBolelliGLoprestiMPudduPBoccaleriEHard ultralight systems by thermal spray deposition of WC-CoCr onto AZ31 magnesium alloy. . 2022;451:129056. doi: 10.1016/j.surfcoat.2022.129056Open DOISearch in Google Scholar
Parco M, Zhao L, Zwick J, Bobzin K, Lugscheider E. Investigation of HVOF spraying on magnesium alloys. Surf Coat Technol. 2006;201:3269–74. doi: 10.1016/j.surfcoat.2006.06.047ParcoMZhaoLZwickJBobzinKLugscheiderE.Investigation of HVOF spraying on magnesium alloys. . 2006;201:3269–74. doi: 10.1016/j.surfcoat.2006.06.047Open DOISearch in Google Scholar
Yıldız F. Tribological properties of WC-12Co coating on AZ91 magnesium alloy fabricated by high velocity oxyfuel spray. High Temp Mater Proc. 2014;33:41–8. doi: 10.1515/htmp-2013-0018YıldızF.Tribological properties of WC-12Co coating on AZ91 magnesium alloy fabricated by high velocity oxyfuel spray. . 2014;33:41–8. doi: 10.1515/htmp-2013-0018Open DOISearch in Google Scholar
Jonda E, Szala M, Sroka M, Łatka L, Walczak M. Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying. Appl Surf Sci. 2023;608:155071. doi: 10.1016/j.apsusc. 2022.155071JondaESzalaMSrokaMŁatkaLWalczakM.Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying. . 2023;608:155071. doi: 10.1016/j.apsusc. 2022.155071Open DOISearch in Google Scholar
Berger L-M, Ettmayer P, Vuoristo P, Mäntylä T, Kunert W. Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: part 1. powder characterization. J Therm Spray Technol. 2001;10:311–25. doi: 10.1361/105996301770349402BergerL-MEttmayerPVuoristoPMäntyläTKunertW.Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: part 1. powder characterization. . 2001;10:311–25. doi: 10.1361/105996301770349402Open DOISearch in Google Scholar
Sidhu TS, Prakash S, Agrawal RD. Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications. Mater Sci. 2005;41:805–23. doi: 10.1007/s11003-006-0047-zSidhuTSPrakashSAgrawalRD.Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications. . 2005;41:805–23. doi: 10.1007/s11003-006-0047-zOpen DOISearch in Google Scholar
Feitosa FRP, Gomes RM, Silva MMR, De Lima SJG, Dubois JM. Effect of oxygen/fuel ratio on the microstructure and properties of HVOF-sprayed Al59Cu25.5Fe12.5B3 quasicrystalline coatings. Surf Coat Technol. 2018;353:171–8. doi: 10.1016/j.surfcoat.2018.08.081FeitosaFRPGomesRMSilvaMMRDe LimaSJGDuboisJM.Effect of oxygen/fuel ratio on the microstructure and properties of HVOF-sprayed Al59Cu25.5Fe12.5B3 quasicrystalline coatings. . 2018;353:171–8. doi: 10.1016/j.surfcoat.2018.08.081Open DOISearch in Google Scholar
Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19:3–20. doi: 10.1557/jmr.2004.19.1.3OliverWCPharrGM.Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. . 2004;19:3–20. doi: 10.1557/jmr.2004.19.1.3Open DOISearch in Google Scholar
Tricoteaux A, Duarte G, Chicot D, Le Bourhis E, Bemporad E, Lesage J. Depth-sensing indentation modeling for determination of elastic modulus of thin films. Mech Mater. 2010;42:166–74. doi: 10.1016/j.mechmat.2009.11.016TricoteauxADuarteGChicotDLe BourhisEBemporadELesageJ.Depth-sensing indentation modeling for determination of elastic modulus of thin films. . 2010;42:166–74. doi: 10.1016/j.mechmat.2009.11.016Open DOISearch in Google Scholar
Łatka L, Chicot D, Cattini A, Pawłowski L, Ambroziak A. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surf Coat Technol. 2013;220:131–9. doi: 10.1016/j.surfcoat.2012.07.025ŁatkaLChicotDCattiniAPawłowskiLAmbroziakA.Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. . 2013;220:131–9. doi: 10.1016/j.surfcoat.2012.07.025Open DOISearch in Google Scholar
Evans AG, Wilshaw TR. Quasi-static solid particle damage in brittle solids—I. observations analysis and implications. Acta Metall. 1976;24:939–56. doi: 10.1016/0001-6160(76)90042-0EvansAGWilshawTR.Quasi-static solid particle damage in brittle solids—I. observations analysis and implications. . 1976;24:939–56. doi: 10.1016/0001-6160(76)90042-0Open DOISearch in Google Scholar
Liu Y, Fischer TE, Dent A. Comparison of HVOF and plasma-sprayed alumina/titania coatings— microstructure, mechanical properties and abrasion behavior. Surf Coat Technol. 2003;167:68–76. doi: 10.1016/S0257-8972(02)00890-3LiuYFischerTEDentA.Comparison of HVOF and plasma-sprayed alumina/titania coatings— microstructure, mechanical properties and abrasion behavior. . 2003;167:68–76. doi: 10.1016/S0257-8972(02)00890-3Open DOISearch in Google Scholar
Murthy JKN, Rao DS, Venkataraman B. Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes. Wear. 2001;249:592–600. doi: 10.1016/S0043-1648(01)00682-2MurthyJKNRaoDSVenkataramanB.Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes. . 2001;249:592–600. doi: 10.1016/S0043-1648(01)00682-2Open DOISearch in Google Scholar
Agüero A, Camón F, García de Blas J, del Hoyo JC, Muelas R, Santaballa A, et al. HVOF-Deposited WCCoCr as replacement for hard Cr in landing gear actuators. J Therm Spray Tech. 2011;20:1292–309. doi: 10.1007/s11666-011-9686-1AgüeroACamónFGarcía de BlasJdel HoyoJCMuelasRSantaballaAHVOF-Deposited WCCoCr as replacement for hard Cr in landing gear actuators. . 2011;20:1292–309. doi: 10.1007/s11666-011-9686-1Open DOISearch in Google Scholar
Ding X, Ke D, Yuan C, Ding Z, Cheng X. Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC. Coatings. 2018;8:307. doi: 10.3390/coatings8090307DingXKeDYuanCDingZChengX.Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC. . 2018;8:307. doi: 10.3390/coatings8090307Open DOISearch in Google Scholar
Zhang S-H, Cho T-Y, Yoon J-H, Li M-X, Shum PW, Kwon S-C. Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment. Mater Sci Eng B. 2009;162:127–34. doi: 10.1016/j.mseb.2009.03.017ZhangS-HChoT-YYoonJ-HLiM-XShumPWKwonS-C.Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment. . 2009;162:127–34. doi: 10.1016/j.mseb.2009.03.017Open DOISearch in Google Scholar
Karaoglanli AC, Oge M, Doleker KM, Hotamis M. Comparison of tribological properties of HVOF sprayed coatings with different composition. Surf Coat Technol. 2017;318:299–308. doi: 10.1016/j.surfcoat.2017.02.021KaraoglanliACOgeMDolekerKMHotamisM.Comparison of tribological properties of HVOF sprayed coatings with different composition. . 2017;318:299–308. doi: 10.1016/j.surfcoat.2017.02.021Open DOISearch in Google Scholar
Hong S, Wu Y, Wang B, Lin J. Improvement in tribological properties of Cr12MoV cold work die steel by HVOF sprayed WC-CoCr cermet coatings. Coatings. 2019;9:825. doi: 10.3390/coatings9120825HongSWuYWangBLinJ.Improvement in tribological properties of Cr12MoV cold work die steel by HVOF sprayed WC-CoCr cermet coatings. . 2019;9:825. doi: 10.3390/coatings9120825Open DOISearch in Google Scholar
Qiao L, Wu Y, Hong S, Long W, Cheng J. Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying. Ceram Int. 2021;47:1829–36. doi: 10.1016/j.ceramint.2020.09.009QiaoLWuYHongSLongWChengJ.Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying. . 2021;47:1829–36. doi: 10.1016/j.ceramint.2020.09.009Open DOISearch in Google Scholar
Taheri M, Valefi Z, Zangeneh-Madar K. Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings. Surf Eng. 2012;28:266–72. doi: 10.1179/1743294411Y.0000000024TaheriMValefiZZangeneh-MadarK.Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings. . 2012;28:266–72. doi: 10.1179/1743294411Y.0000000024Open DOISearch in Google Scholar
Priyan MS, Azad A, Araffath SY. Influence of HVOF parameters on the wear resistance of Cr3C2-NiCr coating. J Mat Sci Surf Eng. 2016;4:6.PriyanMSAzadAAraffathSY.Influence of HVOF parameters on the wear resistance of Cr3C2-NiCr coating. . 2016;4:6.Search in Google Scholar
Hong S, Wu YP, Gao WW, Wang B, Guo WM, Lin JR. Microstructural characterisation and microhardness distribution of HVOF sprayed WC–10Co–4Cr coating. Surf Eng. 2014;30:53–8. doi: 10.1179/1743294413Y.0000000184HongSWuYPGaoWWWangBGuoWMLinJR.Microstructural characterisation and microhardness distribution of HVOF sprayed WC–10Co–4Cr coating. . 2014;30:53–8. doi: 10.1179/1743294413Y.0000000184Open DOISearch in Google Scholar
Song B, Murray JW, Wellman RG, Pala Z, Hussain T. Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings. Wear. 2020;442–443:203114. doi: 10.1016/j.wear.2019.203114SongBMurrayJWWellmanRGPalaZHussainT.Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings. . 2020;442–443:203114. doi: 10.1016/j.wear.2019.203114Open DOISearch in Google Scholar
Murugan K, Ragupathy A, Balasubramanian V, Sridhar K. Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC–10Co–4Cr coatings. Surf Coat Technol. 2014;247:90–102. doi: 10.1016/j.surfcoat.2014.03.022MuruganKRagupathyABalasubramanianVSridharK.Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC–10Co–4Cr coatings. . 2014;247:90–102. doi: 10.1016/j.surfcoat.2014.03.022Open DOISearch in Google Scholar
Mishra TK, Kumar A, Sinha SK. Experimental investigation and study of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coating on its sliding wear behaviour. Int J Refract Metals Hard Mater. 2021;94:105404. doi: 10.1016/j.ijrmhm.2020.105404MishraTKKumarASinhaSK.Experimental investigation and study of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coating on its sliding wear behaviour. . 2021;94:105404. doi: 10.1016/j.ijrmhm.2020.105404Open DOISearch in Google Scholar
Luiz LA, de Andrade J, Pesqueira CM, Siqueira IB de AF, Sucharski GB, de Sousa MJ. Corrosion behavior and galvanic corrosion resistance of WC and Cr3C2 cermet coatings in madeira river water. J Therm Spray Tech. 2021;30:205–21. doi: 10.1007/s11666-021-01152-8LuizLAde AndradeJPesqueiraCMSiqueiraIB de AFSucharskiGBde SousaMJ.Corrosion behavior and galvanic corrosion resistance of WC and Cr3C2 cermet coatings in madeira river water. . 2021;30:205–21. doi: 10.1007/s11666-021-01152-8Open DOISearch in Google Scholar
Picas JA, Punset M, Baile MT, Martín E, Forn A. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings. Surf Coat Technol. 2011;205:S364–8. doi: 10.1016/j.surfcoat.2011.03.129PicasJAPunsetMBaileMTMartínEFornA.Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC-CoCr coatings. . 2011;205:S364–8. doi: 10.1016/j.surfcoat.2011.03.129Open DOISearch in Google Scholar
Ishikawa Y, Kawakita J, Osawa S, Itsukaichi T, Sakamoto Y, Takaya M, et al. Evaluation of corrosion and wear resistance of hard cermet coatings sprayed by using an improved HVOF process. J Therm Spray Technol. 2005;14:384–90. doi: 10.1361/105996305X59378IshikawaYKawakitaJOsawaSItsukaichiTSakamotoYTakayaMEvaluation of corrosion and wear resistance of hard cermet coatings sprayed by using an improved HVOF process. . 2005;14:384–90. doi: 10.1361/105996305X59378Open DOISearch in Google Scholar
Pulsford J, Kamnis S, Murray J, Bai M, Hussain T. Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear. J Therm Spray Tech. 2018;27:207–19. doi: 10.1007/s11666-017-0669-8PulsfordJKamnisSMurrayJBaiMHussainT.Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear. . 2018;27:207–19. doi: 10.1007/s11666-017-0669-8Open DOISearch in Google Scholar
Komarov P, Jech D, Tkachenko S, Slámeèka K, Dvoøák K, Èelko L. Wetting behavior of wear-resistant WC-Co-Cr cermet coatings produced by HVOF: the role of chemical composition and surface roughness. J Therm Spray Tech. 2021;30:285–303. doi: 10.1007/s11666-020-01130-6KomarovPJechDTkachenkoSSlámeèkaKDvoøákKÈelkoL.Wetting behavior of wear-resistant WC-Co-Cr cermet coatings produced by HVOF: the role of chemical composition and surface roughness. . 2021;30:285–303. doi: 10.1007/s11666-020-01130-6Open DOISearch in Google Scholar
Lyphout C, Sato K. Screening design of hard metal feedstock powders for supersonic air fuel processing. Surf Coat Technol. 2014;258:447–57. doi: 10.1016/j.surfcoat.2014.08.055LyphoutCSatoK.Screening design of hard metal feedstock powders for supersonic air fuel processing. . 2014;258:447–57. doi: 10.1016/j.surfcoat.2014.08.055Open DOISearch in Google Scholar
Górnik M, Jonda E, Łatka L, Nowakowska M, Godzierz M. Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings. MaterSci-Poland. 2021;39:545–54. doi: 10.2478/msp-2021-0047GórnikMJondaEŁatkaLNowakowskaMGodzierzM.Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings. . 2021;39:545–54. doi: 10.2478/msp-2021-0047Open DOISearch in Google Scholar
Venturi F, Kamnis S, Hussain T. Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings. Mater Design. 2021;202:109566. doi: 10.1016/j.matdes.2021.109566VenturiFKamnisSHussainT.Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings. . 2021;202:109566. doi: 10.1016/j.matdes.2021.109566Open DOISearch in Google Scholar
Picas JA, Rupérez E, Punset M, Forn A. Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment. Surf Coat Technol. 2013;225:47–57. doi: 10.1016/j.surfcoat.2013.03.015PicasJARupérezEPunsetMFornA.Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment. . 2013;225:47–57. doi: 10.1016/j.surfcoat.2013.03.015Open DOISearch in Google Scholar
Patterson AL. The Scherrer formula for X-ray particle size determination. Phys Rev. 1939;56:978–82. doi: 10.1103/PhysRev.56.978PattersonAL.The Scherrer formula for X-ray particle size determination. . 1939;56:978–82. doi: 10.1103/PhysRev.56.978Open DOISearch in Google Scholar
Tillmann W, Hagen L, Stangier D, Paulus M, Tolan M, Sakrowski R, et al. Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. Surf Coat Technol. 2019;374:448–59. doi: 10.1016/j.surfcoat.2019.06.012TillmannWHagenLStangierDPaulusMTolanMSakrowskiRMicrostructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. . 2019;374:448–59. doi: 10.1016/j.surfcoat.2019.06.012Open DOISearch in Google Scholar
Kishore Mishra T, Kumar A, Sinha S, Sharma S. Investigation of sliding wear behaviour of HVOF carbide coating. Mater Today Proc. 2018;5:19539–46. doi: 10.1016/j.matpr.2018.06.315Kishore MishraTKumarASinhaSSharmaS.Investigation of sliding wear behaviour of HVOF carbide coating. . 2018;5:19539–46. doi: 10.1016/j.matpr.2018.06.315Open DOISearch in Google Scholar
Eßler J, Woelk D, Utu D, Marginean G. Influence of the powder feed rate on the properties of HVOF sprayed WC-based cermet coatings. Mater Today Proc. 2023;78:227–34. doi: 10.1016/j.matpr.2022.11.120EßlerJWoelkDUtuDMargineanG.Influence of the powder feed rate on the properties of HVOF sprayed WC-based cermet coatings. . 2023;78:227–34. doi: 10.1016/j.matpr.2022.11.120Open DOISearch in Google Scholar
Rayón E, Bonache V, Salvador MD, Roa JJ, Sánchez E. Hardness and Young’s modulus distributions in atmospheric plasma sprayed WC–Co coatings using nanoindentation. Surf Coat Technol. 2011;205:4192–7. doi: 10.1016/j.surfcoat.2011.03.012RayónEBonacheVSalvadorMDRoaJJSánchezE.Hardness and Young’s modulus distributions in atmospheric plasma sprayed WC–Co coatings using nanoindentation. . 2011;205:4192–7. doi: 10.1016/j.surfcoat.2011.03.012Open DOISearch in Google Scholar
Duszová A, Halgaš R, Bl’anda M, Hvizdoš P, Lofaj F, Dusza J, et al. Nanoindentation of WC–Co hardmetals. J Eur Ceram Soc. 2013;33:2227–32. doi: 10.1016/j.jeurceramsoc.2012.12.018DuszováAHalgašRBl’andaMHvizdošPLofajFDuszaJNanoindentation of WC–Co hardmetals. . 2013;33:2227–32. doi: 10.1016/j.jeurceramsoc.2012.12.018Open DOISearch in Google Scholar
Wang H, Qiu Q, Gee M, Hou C, Liu X, Song X. Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder. Mater Design. 2020;191:108586. doi: 10.1016/j.matdes.2020.108586WangHQiuQGeeMHouCLiuXSongX.Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder. . 2020;191:108586. doi: 10.1016/j.matdes.2020.108586Open DOISearch in Google Scholar
Culha O, Toparli M, Celik E, Aksoy T, Soykan HS. Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder. Surf Coat Technol. 2009;203:2052–7. doi: 10.1016/j.surfcoat.2009.02.005CulhaOToparliMCelikEAksoyTSoykanHS.Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder. . 2009;203:2052–7. doi: 10.1016/j.surfcoat.2009.02.005Open DOISearch in Google Scholar
Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková Š, et al. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. Surf Coat Technol. 2019;370:196–212. doi: 10.1016/j.surfcoat.2019.04.067MatikainenVRubio PeregrinaSOjalaNKoivuluotoHSchubertJHoudkováŠErosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. . 2019;370:196–212. doi: 10.1016/j.surfcoat.2019.04.067Open DOISearch in Google Scholar
Pulsford J, Venturi F, Pala Z, Kamnis S, Hussain T. Application of HVOF WC-Co-Cr coatings on the internal surface of small cylinders: effect of internal diameter on the wear resistance. Wear. 2019;432–433:202965. doi: 10.1016/j.wear.2019.202965PulsfordJVenturiFPalaZKamnisSHussainT.Application of HVOF WC-Co-Cr coatings on the internal surface of small cylinders: effect of internal diameter on the wear resistance. . 2019;432–433:202965. doi: 10.1016/j.wear.2019.202965Open DOISearch in Google Scholar
Baumann I, Hagen L, Tillmann W, Hollingsworth P, Stangier D, Schmidtmann G, et al. Process characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders. Surf Coat Technol. 2021;405:126716. doi: 10.1016/j.surfcoat.2020.126716BaumannIHagenLTillmannWHollingsworthPStangierDSchmidtmannGProcess characteristics, particle behavior and coating properties during HVOF spraying of conventional, fine and nanostructured WC-12Co powders. . 2021;405:126716. doi: 10.1016/j.surfcoat.2020.126716Open DOISearch in Google Scholar
Ma N, Guo L, Cheng Z,Wu H, Ye F, Zhang K. Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure. Appl Surf Sci. 2014;320:364–71. doi: 10.1016/j.apsusc.2014.09.081MaNGuoLChengZWuHYeFZhangK.Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure. . 2014;320:364–71. doi: 10.1016/j.apsusc.2014.09.081Open DOISearch in Google Scholar