This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Kooij S, Astefanei A, Corthals GL, Bonn D. Size distributions of droplets produced by ultrasonic nebulizers. Sci Rep. 2019;9:6128. doi:10.1038/s41598-019-42599-8.KooijSAstefaneiACorthalsGLBonnDSize distributions of droplets produced by ultrasonic nebulizersSci Rep20199612810.1038/s41598-019-42599-8Open DOISearch in Google Scholar
Mitchell J, Nagel M. Particle size analysis from medicinal inhalers. KONA Powder Part J. 2004;22: 32–5. doi:10.14356/kona.2004010.MitchellJNagelMParticle size analysis from medicinal inhalersKONA Powder Part J20042232510.14356/kona.2004010Open DOISearch in Google Scholar
Aghajani S, Accardo A, Tichem M. Process and nozzle design for high-resolution dry aerosol direct writing (dADW) of sub-100 nm nanoparticles. Addit Manuf. 2022;54: 102729. doi:10.1016/j.addma.2022.102729.AghajaniSAccardoATichemMProcess and nozzle design for high-resolution dry aerosol direct writing (dADW) of sub-100 nm nanoparticlesAddit Manuf20225410272910.1016/j.addma.2022.102729Open DOISearch in Google Scholar
Gou Y, Jia Y, Wang P, Sun C. Progress of inertial microfluidics in principle and application. Sensors (Basel). 2018;18: 1762. doi:10.3390/s18061762.GouYJiaYWangPSunCProgress of inertial microfluidics in principle and applicationSensors (Basel)201818176210.3390/s18061762Open DOISearch in Google Scholar
Di Carlo D. Inertial microfluidics. Lab Chip. 2009;9: 3038–46. doi:10.1039/b912547g.Di CarloDInertial microfluidicsLab Chip2009930384610.1039/b912547gOpen DOISearch in Google Scholar
Chen G, Gu Y, Tsang H, Hines DR, Das S. The effect of droplet sizes on overspray in aerosol-jet printing. Adv Eng Mater. 2018;20, 1701084. doi:10.1002/adem.201701084.ChenGGuYTsangHHinesDRDasSThe effect of droplet sizes on overspray in aerosol-jet printingAdv Eng Mater201820170108410.1002/adem.201701084Open DOISearch in Google Scholar
Saffman PG. The lift on a small sphere in a slow shear flow. J Fluid Mech. 1965;22: 385–400.SaffmanPGThe lift on a small sphere in a slow shear flowJ Fluid Mech196522385400Search in Google Scholar
Rühle F, Schaaf C, Stark H. Optimal control of colloidal trajectories in inertial microfluidics using the Saffman effect. Micromachines (Basel). 2020;11: 592. doi:10.3390/MI11060592.RühleFSchaafCStarkHOptimal control of colloidal trajectories in inertial microfluidics using the Saffman effectMicromachines (Basel).20201159210.3390/MI11060592Open DOISearch in Google Scholar
Akhatov IS, Hoey JM, Swenson OF, Schulz DL. Aerosol focusing in micro-capillaries: theory and experiment. J Aerosol Sci. 2008;39: 691–9. doi:10.1016/j.jaerosci.2008.04.004.AkhatovISHoeyJMSwensonOFSchulzDLAerosol focusing in micro-capillaries: theory and experimentJ Aerosol Sci200839691910.1016/j.jaerosci.2008.04.004Open DOISearch in Google Scholar
Tafoya RR, Secor EB. Understanding effects of print-head geometry in aerosol jet printing. 2020, 5, 035004TafoyaRRSecorEBUnderstanding effects of print-head geometry in aerosol jet printing20205035004Search in Google Scholar
Hoey JM, Lutfurakhmanov A, Schulz DL, Akhatov IS. A review on aerosol-based direct-write and its applications for microelectronics. J Nanotechnol. 2012, 324380. doi:10.1155/2012/324380.HoeyJMLutfurakhmanovASchulzDLAkhatovISA review on aerosol-based direct-write and its applications for microelectronicsJ Nanotechnol2012324380.10.1155/2012/324380Open DOISearch in Google Scholar
Secor EB. Principles of aerosol jet printing. Flex Print Electron. 2018;3. 03502 doi:10.1088/2058-8585/aace28.SecorEBPrinciples of aerosol jet printingFlex Print Electron201830350210.1088/2058-8585/aace28Open DOISearch in Google Scholar
Rajan R, Pandit AB. Correlations to predict droplet size in ultrasonic atomisation. Ultrasonics. 2001;39(4): 235–55. doi:10.1016/s0041-624x(01)00054-3.RajanRPanditABCorrelations to predict droplet size in ultrasonic atomisationUltrasonics20013942355510.1016/s0041-624x(01)00054-3Open DOISearch in Google Scholar
Lang RJ. Ultrasonic atomization of liquids. J Acoust Soc Am. 1962;34,6–8LangRJUltrasonic atomization of liquidsJ Acoust Soc Am19623468Search in Google Scholar
Lozano A, García JA, Alconchel J, Barreras F, Calvo E, Santolaya JL. Influence of liquid properties on ultrasonic atomization. ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6–8 September 2017, Valencia, Spain; doi:10.4995/ilass2017.2017.4588.LozanoAGarcíaJAAlconchelJBarrerasFCalvoESantolayaJLInfluence of liquid properties on ultrasonic atomizationILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems6–8 September 2017Valencia, Spain10.4995/ilass2017.2017.4588Open DOISearch in Google Scholar
Barreras F, Amaveda H, Lozano A. Transient high-frequency ultrasonic water atomization. Exp Fluids. 2002;33: 405–13. doi:10.1007/s00348-002-0456-1.BarrerasFAmavedaHLozanoATransient high-frequency ultrasonic water atomizationExp Fluids2002334051310.1007/s00348-002-0456-1Open DOISearch in Google Scholar
Villermaux E. Fragmentation. Annu Rev Fluid Mech. 2007;39: 419–46. doi:10.1146/annurev.fluid.39.050905.110214.VillermauxEFragmentationAnnu Rev Fluid Mech2007394194610.1146/annurev.fluid.39.050905.110214Open DOISearch in Google Scholar
Shardt N, Wang Y, Jin Z, Elliott JAW. Surface tension as a function of temperature and composition for a broad range of mixtures. Chem Eng Sci. 2021;230: 116095. doi:10.1016/j.ces.2020.116095.ShardtNWangYJinZElliottJAWSurface tension as a function of temperature and composition for a broad range of mixturesChem Eng Sci202123011609510.1016/j.ces.2020.116095Open DOISearch in Google Scholar
Petravic J, Delhommelle J. Hydrogen bonding in ethanol under shear. J Chem Phys. 2005;122: 234509. doi:10.1063/1.1940050.PetravicJDelhommelleJHydrogen bonding in ethanol under shearJ Chem Phys200512223450910.1063/1.1940050Open DOISearch in Google Scholar
Gañán-Calvo AM. Generation of steady liquid microthreads and micron-sized monodisperse sprays in gas streams. 1998, 80, 2–12 doi: 10.1103/Phys-RevLett.80.285Gañán-CalvoAMGeneration of steady liquid microthreads and micron-sized monodisperse sprays in gas streams19988021210.1103/Phys-RevLett.80.285Open DOISearch in Google Scholar
Ohnesorge WV. Die Bildung von Tropfen an Düsen und die Auflösung flüssiger Strahlen. Zeitschrift Für Angewandte Mathematik Und Mechanik. 1936;16: 355–8. doi:10.1002/zamm.19360160611.OhnesorgeWVDie Bildung von Tropfen an Düsen und die Auflösung flüssiger StrahlenZeitschrift Für Angewandte Mathematik Und Mechanik193616355810.1002/zamm.19360160611Open DOISearch in Google Scholar
Yakimets I, MacKerron D, Giesen P, Kilmartin KJ, Goorhuis M, Meinders E, et al. Polymer substrates for flexible electronics: achievements and challenges. Adv Mat Res. 2010;93–94: 5–8. doi:10.4028/www.scientific.net/AMR.93-94.5.YakimetsIMacKerronDGiesenPKilmartinKJGoorhuisMMeindersEPolymer substrates for flexible electronics: achievements and challengesAdv Mat Res201093–945810.4028/www.scientific.net/AMR.93-94.5Open DOISearch in Google Scholar
Zhang Y, Hu G, Liu Y, Wang J, Yang G, Li D. Suppression and utilization of satellite droplets for inkjet printing: a review. Processes. 2022;10: 932. doi:10.3390/pr10050932.ZhangYHuGLiuYWangJYangGLiDSuppression and utilization of satellite droplets for inkjet printing: a reviewProcesses20221093210.3390/pr10050932Open DOISearch in Google Scholar
Ioannou N, Liu H, Zhang YH. Droplet dynamics in confinement. J Comput Sci. 2016;17: 463–74. doi:10.1016/j.jocs.2016.03.009.IoannouNLiuHZhangYHDroplet dynamics in confinementJ Comput Sci2016174637410.1016/j.jocs.2016.03.009Open DOISearch in Google Scholar
Taylor GI. The formation of emulsions in definable fields of flow. Proceedings of the Royal Society of London Series A, Containing Papers of a Mathematical and Physical Character. 1934;146: 501–23. doi:10.1098/rspa.1934.0169.TaylorGIThe formation of emulsions in definable fields of flowProceedings of the Royal Society of London Series A, Containing Papers of a Mathematical and Physical Character19341465012310.1098/rspa.1934.0169Open DOISearch in Google Scholar
Sibillo V, Pasquariello G, Simeone M, Cristini V, Guido S. Drop deformation in microconfined shear flow. Phys Rev Lett. 2006;97: 054502. doi:10.1103/PhysRevLett.97.054502.SibilloVPasquarielloGSimeoneMCristiniVGuidoSDrop deformation in microconfined shear flowPhys Rev Lett20069705450210.1103/PhysRevLett.97.054502Open DOISearch in Google Scholar
Yokoi K. Numerical studies of droplet splashing on a dry surface: triggering a splash with the dynamic contact angle. Soft Matter. 2011;7: 5120–3. doi:10.1039/c1sm05336a.YokoiKNumerical studies of droplet splashing on a dry surface: triggering a splash with the dynamic contact angleSoft Matter201175120310.1039/c1sm05336aOpen DOISearch in Google Scholar
Motzkus C, Gensdarmes F, Géhin E. Parameter study of microdroplet formation by impact of millimetre-size droplets onto a liquid film. J Aerosol Sci. 2009;40: 680–92. doi:10.1016/j.jaerosci.2009.04.001.MotzkusCGensdarmesFGéhinEParameter study of microdroplet formation by impact of millimetre-size droplets onto a liquid filmJ Aerosol Sci2009406809210.1016/j.jaerosci.2009.04.001Open DOISearch in Google Scholar
Yonemoto Y, Tashiro K, Shimizu K, Kunugi T. Predicting the splash of a droplet impinging on solid substrates. Sci Rep. 2022;12,5093. doi:10.1038/s41598-022-08852-3.YonemotoYTashiroKShimizuKKunugiTPredicting the splash of a droplet impinging on solid substratesSci Rep202212509310.1038/s41598-022-08852-3Open DOISearch in Google Scholar
Motzkus C, Gensdarmes F, Géhin E. Study of the coalescence/splash threshold of droplet impact on liquid films and its relevance in assessing airborne particle release. J Colloid Interface Sci. 2011;362: 540–52. doi:10.1016/j.jcis.2011.06.031.MotzkusCGensdarmesFGéhinEStudy of the coalescence/splash threshold of droplet impact on liquid films and its relevance in assessing airborne particle releaseJ Colloid Interface Sci20113625405210.1016/j.jcis.2011.06.031Open DOISearch in Google Scholar
Stow CD, Hadfield MG. An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface. 1981;373, 1755, 419–441 doi: 10.1098/rspa.1981.0002.StowCDHadfieldMGAn experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface1981373175541944110.1098/rspa.1981.0002Open DOISearch in Google Scholar
Almohammadi H, Amirfazli A. Droplet impact: viscosity and wettability effects on splashing. J Colloid Interface Sci. 2019;553: 22–30. doi:10.1016/j.jcis.2019.05.101.AlmohammadiHAmirfazliADroplet impact: viscosity and wettability effects on splashingJ Colloid Interface Sci2019553223010.1016/j.jcis.2019.05.101Open DOISearch in Google Scholar
Latka A, Strandburg-Peshkin A, Driscoll MM, Stevens CS, Nagel SR. Creation of prompt and thin-sheet splashing by varying surface roughness or increasing air pressure. Phys Rev Lett. 2012;109: 054501. doi:10.1103/PhysRevLett.109.054501.LatkaAStrandburg-PeshkinADriscollMMStevensCSNagelSRCreation of prompt and thin-sheet splashing by varying surface roughness or increasing air pressurePhys Rev Lett201210905450110.1103/PhysRevLett.109.054501Open DOISearch in Google Scholar
Ebrahim M, Ortega A. Identification of the impact regimes of a liquid droplet propelled by a gas stream impinging onto a dry surface at moderate to high weber number. Exp Therm Fluid Sci. 2017;80: 168–80. doi:10.1016/j.expthermflusci.2016.08.019.EbrahimMOrtegaAIdentification of the impact regimes of a liquid droplet propelled by a gas stream impinging onto a dry surface at moderate to high weber numberExp Therm Fluid Sci2017801688010.1016/j.expthermflusci.2016.08.019Open DOISearch in Google Scholar
Mezhericher M, Levy A, Borde I. Modelling the morphological evolution of nanosuspension droplet in constant-rate drying stage. Chem Eng Sci. 2011;66: 884–96. doi:10.1016/j.ces.2010.11.028.MezhericherMLevyABordeIModelling the morphological evolution of nanosuspension droplet in constant-rate drying stageChem Eng Sci2011668849610.1016/j.ces.2010.11.028Open DOISearch in Google Scholar
Woźniak M, Derkachov G, Kolwas K, Archer J, Wojciechowski T, Jakubczyk D, et al. Formation of highly ordered spherical aggregates from drying microdroplets of colloidal suspension. Langmuir. 2015;31: 7860–8. doi:10.1021/acs.langmuir.5b01621.WoźniakMDerkachovGKolwasKArcherJWojciechowskiTJakubczykDFormation of highly ordered spherical aggregates from drying microdroplets of colloidal suspensionLangmuir2015317860810.1021/acs.langmuir.5b01621Open DOISearch in Google Scholar
Deegan RD. Pattern formation in drying drops. Am Phys Soc. 2000;60: 475–85.DeeganRDPattern formation in drying dropsAm Phys Soc20006047585Search in Google Scholar
Deegan RD, Bakajin O, Dupont TF, Huber G, Nagel SR, Witten TA. Contact line deposits in an evaporating drop. Am Phys Soc. 2000;62: 756–65.DeeganRDBakajinODupontTFHuberGNagelSRWittenTAContact line deposits in an evaporating dropAm Phys Soc20006275665Search in Google Scholar
Deegan RD, Bakajin O, Dupont TF, Huber G, Nagel SR, Witten TA. Capillary flow as the cause of ring stains from dried liquid drops. Nature. 1997;389: 827–9. doi:10.1038/39827.DeeganRDBakajinODupontTFHuberGNagelSRWittenTACapillary flow as the cause of ring stains from dried liquid dropsNature1997389827910.1038/39827Open DOISearch in Google Scholar
Ikegawa M, Azuma H. Droplet behaviors on substrates in thin-film formation using ink-jet printing. JSME Int J. 2004;47: 490–6.IkegawaMAzumaHDroplet behaviors on substrates in thin-film formation using ink-jet printingJSME Int J2004474906Search in Google Scholar
Wang J, Evans JRG. Drying behaviour of droplets of mixed powder suspensions. J Eur Ceram Soc. 2006;26: 3123–31. doi:10.1016/j.jeurceramsoc.2005.08.018.WangJEvansJRGDrying behaviour of droplets of mixed powder suspensionsJ Eur Ceram Soc20062631233110.1016/j.jeurceramsoc.2005.08.018Open DOISearch in Google Scholar
Soares C. Gas turbine fuel systems and fuels. In: Gas turbines. Elsevier; Dallas, 2015, p.317–411. doi:10.1016/B978-0-12-410461-7.00007-9.SoaresCGas turbine fuel systems and fuelsIn:Gas turbinesElsevierDallas201531741110.1016/B978-0-12-410461-7.00007-9Open DOISearch in Google Scholar
Martyr AJ, Rogers DR. Chapter 15 – Measurement of liquid fuel, oil, and combustion air consumption. Engine Testing. 2021;5: 511–35. doi:10.1016/B978-0-12-821226-4.00015-2.MartyrAJRogersDRChapter 15 – Measurement of liquid fuel, oil, and combustion air consumptionEngine Testing202155113510.1016/B978-0-12-821226-4.00015-2Open DOISearch in Google Scholar
Heng X, Yeates DB. Generation of high concentrations of respirable solid-phase aerosols from viscous fluids. Aerosol Sci Technol. 2018;52: 933–52. doi:10.1080/02786826.2018.1488078.HengXYeatesDBGeneration of high concentrations of respirable solid-phase aerosols from viscous fluidsAerosol Sci Technol2018529335210.1080/02786826.2018.1488078Open DOISearch in Google Scholar
Shimoda T, Morii K, Seki S, Kiguchi H. Introduction: the microliquid process. MRS Bull. 2003;28: 821–7.ShimodaTMoriiKSekiSKiguchiHIntroduction: the microliquid processMRS Bull2003288217Search in Google Scholar
Xiao X, Li G, Liu T, Gu M. Experimental study of the jetting behavior of high-viscosity nanosilver inks in inkjet-based 3d printing. Nanomaterials (Basel). 2022;12: 3076. doi:10.3390/nano12173076.XiaoXLiGLiuTGuMExperimental study of the jetting behavior of high-viscosity nanosilver inks in inkjet-based 3d printingNanomaterials (Basel)202212307610.3390/nano12173076Open DOISearch in Google Scholar
Kwon KS. Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve. J Micromech Microeng. 2010;20: 115005. doi:10.1088/0960-1317/20/11/115005.KwonKSExperimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curveJ Micromech Microeng20102011500510.1088/0960-1317/20/11/115005Open DOISearch in Google Scholar
Lin CW, Kuo TH, Huang SH, Kuo YM, Wu WJ, Chen CC. Characterization of a piezoelectric inkjet aerosol generator for the study of bioaerosol survivability. Aerosol Air Qual Res. 2019;19: 959–70. doi:10.4209/aaqr.2018.07.0254.LinCWKuoTHHuangSHKuoYMWuWJChenCCCharacterization of a piezoelectric inkjet aerosol generator for the study of bioaerosol survivabilityAerosol Air Qual Res2019199597010.4209/aaqr.2018.07.0254Open DOISearch in Google Scholar
Reitelshöfer S, Göttler M, Schmidt P, Treffer P, Landgraf M, Franke J. Aerosol-jet-printing silicone layers and electrodes for stacked dielectric elastomer actuators in one processing device. In: Proceeding of SPIE 9798, Electroactive Polymer Actuators and Devices (EAPAD) 2016, 15 April 2016; 2016, p.97981Y. doi:10.1117/12.2219226.ReitelshöferSGöttlerMSchmidtPTrefferPLandgrafMFrankeJAerosol-jet-printing silicone layers and electrodes for stacked dielectric elastomer actuators in one processing deviceIn:Proceeding of SPIE 9798, Electroactive Polymer Actuators and Devices (EAPAD) 201615 April 2016201697981Y10.1117/12.2219226Open DOISearch in Google Scholar
Chen BT, Yeh HC. An improved virtual impactor: design and performance. J Aerosol Sci. 1987;18: 203–14. doi:10.1016/0021-8502(87)90056-5.ChenBTYehHCAn improved virtual impactor: design and performanceJ Aerosol Sci1987182031410.1016/0021-8502(87)90056-5Open DOISearch in Google Scholar
Gupta AA, Bolduc A, Cloutier SG, Izquierdo R. 2016 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE; 2016.GuptaAABolducACloutierSGIzquierdoR2016 IEEE International Symposium on Circuits and Systems (ISCAS)IEEE2016Search in Google Scholar