This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Wang J, Zou H, Li C, Peng Y, Qiu S, Shen B. The microstructure evolution of type 17-4PH stainless steel during long-term aging at 350°C. Nucl Eng Des. 2006;236(24): 2531–6.WangJZouHLiCPengYQiuSShenBThe microstructure evolution of type 17-4PH stainless steel during long-term aging at 350°CNucl Eng Des2006236242531610.1016/j.nucengdes.2006.03.017Search in Google Scholar
Sabooni S, Chabok A, Feng SC, Blaauw H, Pijper TC, Yang HJ, et al. Laser powder bed fusion of 17–4 PH stainless steel: a comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties. Addit Manuf. 2021;46: 102176.SabooniSChabokAFengSCBlaauwHPijperTCYangHJLaser powder bed fusion of 17–4 PH stainless steel: a comparative study on the effect of heat treatment on the microstructure evolution and mechanical propertiesAddit Manuf20214610217610.1016/j.addma.2021.102176Search in Google Scholar
Slunder CJ, Hoenie AF, Hall AM. Thermal and mechanical treatment for precipitation-hardening stainless steels. Battelle Memorial Inst Columbus Ohio Columbus labs; 1968 Jan.SlunderCJHoenieAFHallAMThermal and mechanical treatment for precipitation-hardening stainless steelsBattelle Memorial Inst Columbus Ohio Columbus labs1968Jan.10.2172/4551454Search in Google Scholar
Hsiao CN, Chiou CS, Yang JR. Aging reactions in a 17-4 PH stainless steel. Mater Chem Phys. 2002;74(2): 134–42.HsiaoCNChiouCSYangJRAging reactions in a 17-4 PH stainless steelMater Chem Phys20027421344210.1016/S0254-0584(01)00460-6Search in Google Scholar
Sowa R, Kowal A, Roga E, Arabasz S, Dziedzic A, Dul I, et al. Influence of double solution treatment on hardness in 17-4 pH steel. Zas Mat. 2015;56(3): 261–8.SowaRKowalARogaEArabaszSDziedzicADulIInfluence of double solution treatment on hardness in 17-4 pH steelZas Mat2015563261810.5937/ZasMat1503261SSearch in Google Scholar
Sealy MP, Karunakaran R, Ortgies S, Madireddy G, Malshe AP, Rajurkar KP. Reducing corrosion of additive manufactured magnesium alloys by interlayer ultrasonic peening. CIRP Ann. 2021;70(1): 179–82.SealyMPKarunakaranROrtgiesSMadireddyGMalsheAPRajurkarKPReducing corrosion of additive manufactured magnesium alloys by interlayer ultrasonic peeningCIRP Ann20217011798210.1016/j.cirp.2021.04.052Search in Google Scholar
Wang C, Wang C, Wang L, Lai Y, Li K, Zhou Y. A dislocation density–based comparative study of grain refinement, residual stresses, and surface roughness induced by shot peening and surface mechanical attrition treatment. Int J Adv Manuf Technol. 2020;108(1–2): 505–25.WangCWangCWangLLaiYLiKZhouYA dislocation density–based comparative study of grain refinement, residual stresses, and surface roughness induced by shot peening and surface mechanical attrition treatmentInt J Adv Manuf Technol20201081–25052510.1007/s00170-020-05413-8Search in Google Scholar
Świetlicki A, Szala M, Walczak M. Effects of shot peening and cavitation peening on properties of surface layer of metallic materials—A short review. Materials. 2022;15(7): 2476.ŚwietlickiASzalaMWalczakMEffects of shot peening and cavitation peening on properties of surface layer of metallic materials—A short reviewMaterials2022157247610.3390/ma15072476899984135407808Search in Google Scholar
Qin E, Chen G, Tan Z, Wu S. Shot peening and thermal stress relaxation in 17-4 PH stainless steel. J Mater Eng Perform. 2015;24(11): 4578–83.QinEChenGTanZWuSShot peening and thermal stress relaxation in 17-4 PH stainless steelJ Mater Eng Perform2015241145788310.1007/s11665-015-1761-1Search in Google Scholar
Nino-Barrera J, Sanchez-Aleman J, Acosta-Humanez M, Gamboa-Martinez L, Cortes-Rodriguez C. Shot peening increases resistance to cyclic fatigue fracture of endodontic files. Sci Rep. 2021;11(1): 12961.Nino-BarreraJSanchez-AlemanJAcosta-HumanezMGamboa-MartinezLCortes-RodriguezCShot peening increases resistance to cyclic fatigue fracture of endodontic filesSci Rep20211111296110.1038/s41598-021-92382-x821749334155287Search in Google Scholar
Żebrowski R, Walczak M, Korga A, Iwan M, Szala M. Effect of shot peening on the mechanical properties and cytotoxicity behaviour of titanium implants produced by 3D printing technology. J Healthcare Eng. 2019;2019: 1–11.ŻebrowskiRWalczakMKorgaAIwanMSzalaMEffect of shot peening on the mechanical properties and cytotoxicity behaviour of titanium implants produced by 3D printing technologyJ Healthcare Eng2019201911110.1155/2019/8169538694283831934324Search in Google Scholar
John M, Kalvala PR, Misra M, Menezes PL. Peening techniques for surface modification: processes, properties, and applications. Materials. 2021;14(14): 3841.JohnMKalvalaPRMisraMMenezesPLPeening techniques for surface modification: processes, properties, and applicationsMaterials20211414384110.3390/ma14143841830735534300760Search in Google Scholar
Sadeghi E, Pant P, Jafari R, Peng RL, Karimi P. Sub-surface grain refinement in electron beam-powder bed fusion of Alloy 718: surface texture and oxidation performance. Mater Charact. 2020;168: 110567.SadeghiEPantPJafariRPengRLKarimiPSub-surface grain refinement in electron beam-powder bed fusion of Alloy 718: surface texture and oxidation performanceMater Charact202016811056710.1016/j.matchar.2020.110567Search in Google Scholar
Leon A, Katarivas Levy G, Ron T, Shirizly A, Aghion E. The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process. J Mater Res Technol. 2020;9(3): 4097–105.LeonAKatarivas LevyGRonTShirizlyAAghionEThe effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing processJ Mater Res Technol202093409710510.1016/j.jmrt.2020.02.035Search in Google Scholar
Wen D, Long P, Li J, Huang L, Zheng Z. Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing. Vacuum. 2020;173: 109131.WenDLongPLiJHuangLZhengZEffects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturingVacuum202017310913110.1016/j.vacuum.2019.109131Search in Google Scholar
Hung W. Postprocessing of additively manufactured metal parts. J Mater Eng Perform. 2021;30(9): 6439–60.HungWPostprocessing of additively manufactured metal partsJ Mater Eng Perform202130964396010.1007/s11665-021-06037-zSearch in Google Scholar
Maleki E, Bagherifard S, Bandini M, Guagliano M. Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities. Addit Manuf. 2021;37: 101619.MalekiEBagherifardSBandiniMGuaglianoMSurface post-treatments for metal additive manufacturing: progress, challenges, and opportunitiesAddit Manuf20213710161910.1016/j.addma.2020.101619Search in Google Scholar
AlMangour B, Yang JM. Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing. Mater Des. 2016;110: 914–24.AlMangourBYangJMImproving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturingMater Des20161109142410.1016/j.matdes.2016.08.037Search in Google Scholar
Tavares SSM, Pardal JM, Martins TRB, da Silva MR. Influence of sulfur content on the corrosion resistance of 17-4PH stainless steel. J Mater Eng Perform. 2017;26(6): 2512–9.TavaresSSMPardalJMMartinsTRBda SilvaMRInfluence of sulfur content on the corrosion resistance of 17-4PH stainless steelJ Mater Eng Perform20172662512910.1007/s11665-017-2693-8Search in Google Scholar
Fargas G, Roa JJ, Mateo A. Effect of shot peening on metastable austenitic stainless steels. Mater Sci Eng A. 2015;641: 290–6.FargasGRoaJJMateoAEffect of shot peening on metastable austenitic stainless steelsMater Sci Eng A2015641290610.1016/j.msea.2015.05.079Search in Google Scholar
Kirk D, Payne NJ. Transformations induced in austenitic stainless steels by shot peening. In: ICSP7: 7th International Conference on Shot Peening, Warsaw, Poland; 1999.KirkDPayneNJTransformations induced in austenitic stainless steels by shot peeningIn:ICSP7: 7th International Conference on Shot PeeningWarsaw, Poland1999Search in Google Scholar
Murr LE, Martinez E, Hernandez J, Collins S, Amato KN, Gaytan SM, et al. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting. J Mater Res Technol. 2012;1(3): 167–77.MurrLEMartinezEHernandezJCollinsSAmatoKNGaytanSMMicrostructures and properties of 17-4 PH stainless steel fabricated by selective laser meltingJ Mater Res Technol2012131677710.1016/S2238-7854(12)70029-7Search in Google Scholar
Starr TL, Rafi K, Stucker B, Scherzer CM. Controlling phase composition in selective laser melted stainless steels. 2012 Aug 22 [cited 2022 Nov 29] Available from: https://repositories.lib.utexas.edu/handle/2152/88426StarrTLRafiKStuckerBScherzerCMControlling phase composition in selective laser melted stainless steels2012 Aug 22 [cited 2022 Nov 29] Available from: https://repositories.lib.utexas.edu/handle/2152/88426Search in Google Scholar
Rafi HK, Pal D, Patil N, Starr TL, Stucker BE. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting. J Mater Eng Perform. 2014;23(12): 4421–8.RafiHKPalDPatilNStarrTLStuckerBEMicrostructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser meltingJ Mater Eng Perform201423124421810.1007/s11665-014-1226-ySearch in Google Scholar
Guo D, Chen J, Chen X, Shi Q, Cristino VAM, Kwok CT, et al. Pitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatment. Corros Sci. 2021;193: 109887.GuoDChenJChenXShiQCristinoVAMKwokCTPitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatmentCorros Sci202119310988710.1016/j.corsci.2021.109887Search in Google Scholar
Stoudt MR, Campbell CE, Ricker RE. Examining the relationship between post-build microstructure and the corrosion resistance of additively manufactured 17-4PH stainless steel. Materialia. 2022;22: 101435.StoudtMRCampbellCERickerREExamining the relationship between post-build microstructure and the corrosion resistance of additively manufactured 17-4PH stainless steelMaterialia20222210143510.1016/j.mtla.2022.101435Search in Google Scholar
Campbell CE, Stoudt MR, Zhang F. Additive manufacturing of steels and stainless steels. In: Bourell DL, Frazier W, Kuhn H, Seifi M. (eds.) Additive manufacturing processes: ASM International; 2020. p. 346–65 [cited 2022 Aug 31]. Available from: http://dl.asminternational.org/handbooks/book/119/chapter/2349634/Additive-Manufacturing-of-Steels-and-StainlessCampbellCEStoudtMRZhangFAdditive manufacturing of steels and stainless steelsIn:BourellDLFrazierWKuhnHSeifiM(eds.)Additive manufacturing processesASM International202034665[cited 2022 Aug 31]. Available from: http://dl.asminternational.org/handbooks/book/119/chapter/2349634/Additive-Manufacturing-of-Steels-and-Stainless10.31399/asm.hb.v24.a0006566Search in Google Scholar
Lara Banda M del R, Pérez Ortíz DY, Gaona Tiburcio C, Zambrano-Robledo P, Cabral Miramontes JA, Almeraya Calderon F. Citric acid passivation of 15-5PH and 17-4PH stainless steel used in the aeronautical industry. In: Zambrano-Robledo P, Salinas-Rodriguez A, Almeraya Calderon F. (eds). Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications. Cham: Springer International Publishing; 2018. p. 95–104 [cited 2022 Jun 8]. Available from: http://link.springer.com/10.1007/978-3-319-65611-3_9Lara BandaM del RPérez OrtízDYGaona TiburcioCZambrano-RobledoPCabral MiramontesJAAlmeraya CalderonFCitric acid passivation of 15-5PH and 17-4PH stainless steel used in the aeronautical industryIn:Zambrano-RobledoPSalinas-RodriguezAAlmeraya CalderonF(eds).Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial ApplicationsChamSpringer International Publishing201895104[cited 2022 Jun 8]. Available from: http://link.springer.com/10.1007/978-3-319-65611-3_910.1007/978-3-319-65611-3_9Search in Google Scholar
Karaminezhaad M, Sharafi S, Dalili K. Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions. J Mater Sci. 2006;41(11): 3329–33.KaraminezhaadMSharafiSDaliliKEffect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutionsJ Mater Sci2006411133293310.1007/s10853-005-5416-8Search in Google Scholar
Coseglio MSDR. Sulphide stress cracking of 17-4 PH for applications in oilfield components. Mater Sci Technol. 2017;33(16): 1863–78.CoseglioMSDRSulphide stress cracking of 17-4 PH for applications in oilfield componentsMater Sci Technol2017331618637810.1080/02670836.2017.1330230Search in Google Scholar
Nakhaie D, Moayed MH. Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel. Corros Sci. 2014;80: 290–8.NakhaieDMoayedMHPitting corrosion of cold rolled solution treated 17-4 PH stainless steelCorros Sci201480290810.1016/j.corsci.2013.11.039Search in Google Scholar
Raja KS, Rao KP. Pitting behavior of type 17-4 PH stainless steel weldments. Corrosion. 1995;51(8): 586–92.RajaKSRaoKPPitting behavior of type 17-4 PH stainless steel weldmentsCorrosion19955185869210.5006/1.3293618Search in Google Scholar
Kosasang O, Wongkaewmoon M, Chumphongphan S. Effect of aging heat treatment on corrosion behavior and corrosion kinetics of 17-4PH stainless steel in artificial saliva. J Sains Malays. 2021;50(3): 849–58.KosasangOWongkaewmoonMChumphongphanSEffect of aging heat treatment on corrosion behavior and corrosion kinetics of 17-4PH stainless steel in artificial salivaJ Sains Malays20215038495810.17576/jsm-2021-5003-25Search in Google Scholar
Barroux A, Ducommun N, Nivet E, Laffont L, Blanc C. Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting. Corro Sci. 2020;169: 108594.BarrouxADucommunNNivetELaffontLBlancCPitting corrosion of 17-4PH stainless steel manufactured by laser beam meltingCorro Sci202016910859410.1016/j.corsci.2020.108594Search in Google Scholar
Lashgari HR, Xue Y, Onggowarsito C, Kong C, Li S. Microstructure, tribological properties and corrosion behaviour of additively manufactured 17-4PH stainless steel: effects of scanning pattern, build orientation, and single vs. double scan. Mater Today Commun. 2020;25: 101535.LashgariHRXueYOnggowarsitoCKongCLiSMicrostructure, tribological properties and corrosion behaviour of additively manufactured 17-4PH stainless steel: effects of scanning pattern, build orientation, and single vs. double scanMater Today Commun20202510153510.1016/j.mtcomm.2020.101535Search in Google Scholar
Jacob G. Prediction of solidification phases in Cr-Ni stainless steel alloys manufactured by laser based powder bed fusion process. Gaithersburg, MD: National Institute of Standards and Technology; 2018 Mar p. NIST AMS 100-14. Report Number: NIST AMS 100-14.JacobGPrediction of solidification phases in Cr-Ni stainless steel alloys manufactured by laser based powder bed fusion processGaithersburg, MDNational Institute of Standards and Technology2018Marp. NIST AMS 100-14. Report Number: NIST AMS 100-14.10.6028/NIST.AMS.100-14Search in Google Scholar
Eskandari H, Lashgari HR, Ye L, Eizadjou M, Wang H. Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel. Mater Today Commun. 2022;30: 103075.EskandariHLashgariHRYeLEizadjouMWangHMicrostructural characterization and mechanical properties of additively manufactured 17–4PH stainless steelMater Today Commun20223010307510.1016/j.mtcomm.2021.103075Search in Google Scholar
Wang Z, Luan W, Huang J, Jiang C. XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PH. Mater Sci Eng A. 2011;528(21): 6417–25.WangZLuanWHuangJJiangCXRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PHMater Sci Eng A20115282164172510.1016/j.msea.2011.03.098Search in Google Scholar
Mathoho I, Akinlabi ET, Arthur N, Tlotleng M, Masina B. Metallurgical characteristics of laser peened 17-4 PH SS processed by LENS technique. In: The Minerals, Metals & Materials Series (eds) TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham: Springer International Publishing; 2019. p. 279–85. (The Minerals, Metals & Materials Series).MathohoIAkinlabiETArthurNTlotlengMMasinaBMetallurgical characteristics of laser peened 17-4 PH SS processed by LENS techniqueIn:The Minerals, Metals & Materials Series(eds)TMS 2019 148th Annual Meeting & Exhibition Supplemental ProceedingsChamSpringer International Publishing201927985(The Minerals, Metals & Materials Series).10.1007/978-3-030-05861-6_25Search in Google Scholar
Bagherifard S, Ghelichi R, Guagliano M. Numerical and experimental analysis of surface roughness generated by shot peening. Appl Surf Sci. 2012;258(18): 6831–40.BagherifardSGhelichiRGuaglianoMNumerical and experimental analysis of surface roughness generated by shot peeningAppl Surf Sci20122581868314010.1016/j.apsusc.2012.03.111Search in Google Scholar
Higounenc O. Correlation of shot peening parameters to surface characteristic. 2005. In: ICSP9: 9th International Conference on Shot Peening, Marne la Vallée, France, 6-9.09.2005.HigounencOCorrelation of shot peening parameters to surface characteristic2005In:ICSP9: 9th International Conference on Shot PeeningMarne la Vallée, France6-9.09.2005.Search in Google Scholar
Walczak M, Szala M. Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing. Archiv Civ Mech Eng. 2021;21(4): 157.WalczakMSzalaMEffect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturingArchiv Civ Mech Eng202121415710.1007/s43452-021-00306-3Search in Google Scholar
Sanaei N, Fatemi A. Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals. Theor Appl Fract Mech. 2020;108: 102638.SanaeiNFatemiAAnalysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metalsTheor Appl Fract Mech202010810263810.1016/j.tafmec.2020.102638Search in Google Scholar
Cheruvathur S, Lass EA, Campbell CE. Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure. JOM. 2016;68(3): 930–42.CheruvathurSLassEACampbellCEAdditive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructureJOM20166839304210.1007/s11837-015-1754-4Search in Google Scholar
Maleki E, Unal O, Reza Kashyzadeh K, Bagherifard S, Guagliano M. A systematic study on the effects of shot peening on a mild carbon steel: microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimens. Appl Surf Sci Adv. 2021;4: 100071.MalekiEUnalOReza KashyzadehKBagherifardSGuaglianoMA systematic study on the effects of shot peening on a mild carbon steel: microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimensAppl Surf Sci Adv2021410007110.1016/j.apsadv.2021.100071Search in Google Scholar
Guennouni N, Barroux A, Grosjean C, Maisonnette D, Nivet E, Andrieu E, et al. Comparative study of the microstructure between a laser beam melted 17-4PH stainless steel and its conventional counterpart. Mater Sci Eng A. 2021;823: 141718.GuennouniNBarrouxAGrosjeanCMaisonnetteDNivetEAndrieuEComparative study of the microstructure between a laser beam melted 17-4PH stainless steel and its conventional counterpartMater Sci Eng A202182314171810.1016/j.msea.2021.141718Search in Google Scholar
Efe Y, Karademir I, Husem F, Maleki E, Karimbaev R, Amanov A, et al. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification. Appl Surf Sci. 2020;528: 146922.EfeYKarademirIHusemFMalekiEKarimbaevRAmanovAEnhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modificationAppl Surf Sci202052814692210.1016/j.apsusc.2020.146922Search in Google Scholar
Kameyama Y, Komotori J. Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials. J Mater Process Technol. 2009;209(20): 6146–55.KameyamaYKomotoriJEffect of micro ploughing during fine particle peening process on the microstructure of metallic materialsJ Mater Process Technol20092092061465510.1016/j.jmatprotec.2009.08.010Search in Google Scholar
Soleimani M, Mirzadeh H, Dehghanian C. Effect of grain size on the corrosion resistance of low carbon steel. Mater Res Express. 2020;7(1): 016522.SoleimaniMMirzadehHDehghanianCEffect of grain size on the corrosion resistance of low carbon steelMater Res Express20207101652210.1088/2053-1591/ab62faSearch in Google Scholar
Qiao M, Hu J, Guo K, Wang Q. Influence of shot peening on corrosion behavior of low alloy steel. Mater Res Express. 2020;7(1): 016574.QiaoMHuJGuoKWangQInfluence of shot peening on corrosion behavior of low alloy steelMater Res Express20207101657410.1088/2053-1591/ab6920Search in Google Scholar