Effect of shot peening on corrosion resistance of additive manufactured 17-4PH steel

[1] Wang J, Zou H, Li C, Peng Y, Qiu S, Shen B. The microstructure evolution of type 17-4PH stainless steel during long-term aging at 350°C. Nucl Eng Des. 2006;236(24): 2531–6. WangJ ZouH LiC PengY QiuS ShenB The microstructure evolution of type 17-4PH stainless steel during long-term aging at 350°C Nucl Eng Des 2006 236 24 2531 6 10.1016/j.nucengdes.2006.03.017 Search in Google Scholar

[2] Sabooni S, Chabok A, Feng SC, Blaauw H, Pijper TC, Yang HJ, et al. Laser powder bed fusion of 17–4 PH stainless steel: a comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties. Addit Manuf. 2021;46: 102176. SabooniS ChabokA FengSC BlaauwH PijperTC YangHJ Laser powder bed fusion of 17–4 PH stainless steel: a comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties Addit Manuf 2021 46 102176 10.1016/j.addma.2021.102176 Search in Google Scholar

[3] Slunder CJ, Hoenie AF, Hall AM. Thermal and mechanical treatment for precipitation-hardening stainless steels. Battelle Memorial Inst Columbus Ohio Columbus labs; 1968 Jan. SlunderCJ HoenieAF HallAM Thermal and mechanical treatment for precipitation-hardening stainless steels Battelle Memorial Inst Columbus Ohio Columbus labs 1968 Jan. 10.2172/4551454 Search in Google Scholar

[4] Hsiao CN, Chiou CS, Yang JR. Aging reactions in a 17-4 PH stainless steel. Mater Chem Phys. 2002;74(2): 134–42. HsiaoCN ChiouCS YangJR Aging reactions in a 17-4 PH stainless steel Mater Chem Phys 2002 74 2 134 42 10.1016/S0254-0584(01)00460-6 Search in Google Scholar

[5] Sowa R, Kowal A, Roga E, Arabasz S, Dziedzic A, Dul I, et al. Influence of double solution treatment on hardness in 17-4 pH steel. Zas Mat. 2015;56(3): 261–8. SowaR KowalA RogaE ArabaszS DziedzicA DulI Influence of double solution treatment on hardness in 17-4 pH steel Zas Mat 2015 56 3 261 8 10.5937/ZasMat1503261S Search in Google Scholar

[6] Sealy MP, Karunakaran R, Ortgies S, Madireddy G, Malshe AP, Rajurkar KP. Reducing corrosion of additive manufactured magnesium alloys by interlayer ultrasonic peening. CIRP Ann. 2021;70(1): 179–82. SealyMP KarunakaranR OrtgiesS MadireddyG MalsheAP RajurkarKP Reducing corrosion of additive manufactured magnesium alloys by interlayer ultrasonic peening CIRP Ann 2021 70 1 179 82 10.1016/j.cirp.2021.04.052 Search in Google Scholar

[7] Wang C, Wang C, Wang L, Lai Y, Li K, Zhou Y. A dislocation density–based comparative study of grain refinement, residual stresses, and surface roughness induced by shot peening and surface mechanical attrition treatment. Int J Adv Manuf Technol. 2020;108(1–2): 505–25. WangC WangC WangL LaiY LiK ZhouY A dislocation density–based comparative study of grain refinement, residual stresses, and surface roughness induced by shot peening and surface mechanical attrition treatment Int J Adv Manuf Technol 2020 108 1–2 505 25 10.1007/s00170-020-05413-8 Search in Google Scholar

[8] Świetlicki A, Szala M, Walczak M. Effects of shot peening and cavitation peening on properties of surface layer of metallic materials—A short review. Materials. 2022;15(7): 2476. ŚwietlickiA SzalaM WalczakM Effects of shot peening and cavitation peening on properties of surface layer of metallic materials—A short review Materials 2022 15 7 2476 10.3390/ma15072476899984135407808 Search in Google Scholar

[9] Qin E, Chen G, Tan Z, Wu S. Shot peening and thermal stress relaxation in 17-4 PH stainless steel. J Mater Eng Perform. 2015;24(11): 4578–83. QinE ChenG TanZ WuS Shot peening and thermal stress relaxation in 17-4 PH stainless steel J Mater Eng Perform 2015 24 11 4578 83 10.1007/s11665-015-1761-1 Search in Google Scholar

[10] Nino-Barrera J, Sanchez-Aleman J, Acosta-Humanez M, Gamboa-Martinez L, Cortes-Rodriguez C. Shot peening increases resistance to cyclic fatigue fracture of endodontic files. Sci Rep. 2021;11(1): 12961. Nino-BarreraJ Sanchez-AlemanJ Acosta-HumanezM Gamboa-MartinezL Cortes-RodriguezC Shot peening increases resistance to cyclic fatigue fracture of endodontic files Sci Rep 2021 11 1 12961 10.1038/s41598-021-92382-x821749334155287 Search in Google Scholar

[11] Żebrowski R, Walczak M, Korga A, Iwan M, Szala M. Effect of shot peening on the mechanical properties and cytotoxicity behaviour of titanium implants produced by 3D printing technology. J Healthcare Eng. 2019;2019: 1–11. ŻebrowskiR WalczakM KorgaA IwanM SzalaM Effect of shot peening on the mechanical properties and cytotoxicity behaviour of titanium implants produced by 3D printing technology J Healthcare Eng 2019 2019 1 11 10.1155/2019/8169538694283831934324 Search in Google Scholar

[12] John M, Kalvala PR, Misra M, Menezes PL. Peening techniques for surface modification: processes, properties, and applications. Materials. 2021;14(14): 3841. JohnM KalvalaPR MisraM MenezesPL Peening techniques for surface modification: processes, properties, and applications Materials 2021 14 14 3841 10.3390/ma14143841830735534300760 Search in Google Scholar

[13] Sadeghi E, Pant P, Jafari R, Peng RL, Karimi P. Sub-surface grain refinement in electron beam-powder bed fusion of Alloy 718: surface texture and oxidation performance. Mater Charact. 2020;168: 110567. SadeghiE PantP JafariR PengRL KarimiP Sub-surface grain refinement in electron beam-powder bed fusion of Alloy 718: surface texture and oxidation performance Mater Charact 2020 168 110567 10.1016/j.matchar.2020.110567 Search in Google Scholar

[14] Leon A, Katarivas Levy G, Ron T, Shirizly A, Aghion E. The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process. J Mater Res Technol. 2020;9(3): 4097–105. LeonA Katarivas LevyG RonT ShirizlyA AghionE The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process J Mater Res Technol 2020 9 3 4097 105 10.1016/j.jmrt.2020.02.035 Search in Google Scholar

[15] Wen D, Long P, Li J, Huang L, Zheng Z. Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing. Vacuum. 2020;173: 109131. WenD LongP LiJ HuangL ZhengZ Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing Vacuum 2020 173 109131 10.1016/j.vacuum.2019.109131 Search in Google Scholar

[16] Hung W. Postprocessing of additively manufactured metal parts. J Mater Eng Perform. 2021;30(9): 6439–60. HungW Postprocessing of additively manufactured metal parts J Mater Eng Perform 2021 30 9 6439 60 10.1007/s11665-021-06037-z Search in Google Scholar

[17] Maleki E, Bagherifard S, Bandini M, Guagliano M. Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities. Addit Manuf. 2021;37: 101619. MalekiE BagherifardS BandiniM GuaglianoM Surface post-treatments for metal additive manufacturing: progress, challenges, and opportunities Addit Manuf 2021 37 101619 10.1016/j.addma.2020.101619 Search in Google Scholar

[18] AlMangour B, Yang JM. Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing. Mater Des. 2016;110: 914–24. AlMangourB YangJM Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing Mater Des 2016 110 914 24 10.1016/j.matdes.2016.08.037 Search in Google Scholar

[19] Tavares SSM, Pardal JM, Martins TRB, da Silva MR. Influence of sulfur content on the corrosion resistance of 17-4PH stainless steel. J Mater Eng Perform. 2017;26(6): 2512–9. TavaresSSM PardalJM MartinsTRB da SilvaMR Influence of sulfur content on the corrosion resistance of 17-4PH stainless steel J Mater Eng Perform 2017 26 6 2512 9 10.1007/s11665-017-2693-8 Search in Google Scholar

[20] Fargas G, Roa JJ, Mateo A. Effect of shot peening on metastable austenitic stainless steels. Mater Sci Eng A. 2015;641: 290–6. FargasG RoaJJ MateoA Effect of shot peening on metastable austenitic stainless steels Mater Sci Eng A 2015 641 290 6 10.1016/j.msea.2015.05.079 Search in Google Scholar

[21] Kirk D, Payne NJ. Transformations induced in austenitic stainless steels by shot peening. In: ICSP7: 7th International Conference on Shot Peening, Warsaw, Poland; 1999. KirkD PayneNJ Transformations induced in austenitic stainless steels by shot peening In: ICSP7: 7th International Conference on Shot Peening Warsaw, Poland 1999 Search in Google Scholar

[22] Murr LE, Martinez E, Hernandez J, Collins S, Amato KN, Gaytan SM, et al. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting. J Mater Res Technol. 2012;1(3): 167–77. MurrLE MartinezE HernandezJ CollinsS AmatoKN GaytanSM Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting J Mater Res Technol 2012 1 3 167 77 10.1016/S2238-7854(12)70029-7 Search in Google Scholar

[23] Starr TL, Rafi K, Stucker B, Scherzer CM. Controlling phase composition in selective laser melted stainless steels. 2012 Aug 22 [cited 2022 Nov 29] Available from: https://repositories.lib.utexas.edu/handle/2152/88426 StarrTL RafiK StuckerB ScherzerCM Controlling phase composition in selective laser melted stainless steels 2012 Aug 22 [cited 2022 Nov 29] Available from: https://repositories.lib.utexas.edu/handle/2152/88426 Search in Google Scholar

[24] Rafi HK, Pal D, Patil N, Starr TL, Stucker BE. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting. J Mater Eng Perform. 2014;23(12): 4421–8. RafiHK PalD PatilN StarrTL StuckerBE Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting J Mater Eng Perform 2014 23 12 4421 8 10.1007/s11665-014-1226-y Search in Google Scholar

[25] Guo D, Chen J, Chen X, Shi Q, Cristino VAM, Kwok CT, et al. Pitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatment. Corros Sci. 2021;193: 109887. GuoD ChenJ ChenX ShiQ CristinoVAM KwokCT Pitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatment Corros Sci 2021 193 109887 10.1016/j.corsci.2021.109887 Search in Google Scholar

[26] Stoudt MR, Campbell CE, Ricker RE. Examining the relationship between post-build microstructure and the corrosion resistance of additively manufactured 17-4PH stainless steel. Materialia. 2022;22: 101435. StoudtMR CampbellCE RickerRE Examining the relationship between post-build microstructure and the corrosion resistance of additively manufactured 17-4PH stainless steel Materialia 2022 22 101435 10.1016/j.mtla.2022.101435 Search in Google Scholar

[27] Campbell CE, Stoudt MR, Zhang F. Additive manufacturing of steels and stainless steels. In: Bourell DL, Frazier W, Kuhn H, Seifi M. (eds.) Additive manufacturing processes: ASM International; 2020. p. 346–65 [cited 2022 Aug 31]. Available from: http://dl.asminternational.org/handbooks/book/119/chapter/2349634/Additive-Manufacturing-of-Steels-and-Stainless CampbellCE StoudtMR ZhangF Additive manufacturing of steels and stainless steels In: BourellDL FrazierW KuhnH SeifiM (eds.) Additive manufacturing processes ASM International 2020 346 65 [cited 2022 Aug 31]. Available from: http://dl.asminternational.org/handbooks/book/119/chapter/2349634/Additive-Manufacturing-of-Steels-and-Stainless 10.31399/asm.hb.v24.a0006566 Search in Google Scholar

[28] Lara Banda M del R, Pérez Ortíz DY, Gaona Tiburcio C, Zambrano-Robledo P, Cabral Miramontes JA, Almeraya Calderon F. Citric acid passivation of 15-5PH and 17-4PH stainless steel used in the aeronautical industry. In: Zambrano-Robledo P, Salinas-Rodriguez A, Almeraya Calderon F. (eds). Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications. Cham: Springer International Publishing; 2018. p. 95–104 [cited 2022 Jun 8]. Available from: http://link.springer.com/10.1007/978-3-319-65611-3_9 Lara BandaM del R Pérez OrtízDY Gaona TiburcioC Zambrano-RobledoP Cabral MiramontesJA Almeraya CalderonF Citric acid passivation of 15-5PH and 17-4PH stainless steel used in the aeronautical industry In: Zambrano-RobledoP Salinas-RodriguezA Almeraya CalderonF (eds). Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications Cham Springer International Publishing 2018 95 104 [cited 2022 Jun 8]. Available from: http://link.springer.com/10.1007/978-3-319-65611-3_9 10.1007/978-3-319-65611-3_9 Search in Google Scholar

[29] Karaminezhaad M, Sharafi S, Dalili K. Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions. J Mater Sci. 2006;41(11): 3329–33. KaraminezhaadM SharafiS DaliliK Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions J Mater Sci 2006 41 11 3329 33 10.1007/s10853-005-5416-8 Search in Google Scholar

[30] Coseglio MSDR. Sulphide stress cracking of 17-4 PH for applications in oilfield components. Mater Sci Technol. 2017;33(16): 1863–78. CoseglioMSDR Sulphide stress cracking of 17-4 PH for applications in oilfield components Mater Sci Technol 2017 33 16 1863 78 10.1080/02670836.2017.1330230 Search in Google Scholar

[31] Nakhaie D, Moayed MH. Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel. Corros Sci. 2014;80: 290–8. NakhaieD MoayedMH Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel Corros Sci 2014 80 290 8 10.1016/j.corsci.2013.11.039 Search in Google Scholar

[32] Raja KS, Rao KP. Pitting behavior of type 17-4 PH stainless steel weldments. Corrosion. 1995;51(8): 586–92. RajaKS RaoKP Pitting behavior of type 17-4 PH stainless steel weldments Corrosion 1995 51 8 586 92 10.5006/1.3293618 Search in Google Scholar

[33] Kosasang O, Wongkaewmoon M, Chumphongphan S. Effect of aging heat treatment on corrosion behavior and corrosion kinetics of 17-4PH stainless steel in artificial saliva. J Sains Malays. 2021;50(3): 849–58. KosasangO WongkaewmoonM ChumphongphanS Effect of aging heat treatment on corrosion behavior and corrosion kinetics of 17-4PH stainless steel in artificial saliva J Sains Malays 2021 50 3 849 58 10.17576/jsm-2021-5003-25 Search in Google Scholar

[34] Barroux A, Ducommun N, Nivet E, Laffont L, Blanc C. Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting. Corro Sci. 2020;169: 108594. BarrouxA DucommunN NivetE LaffontL BlancC Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting Corro Sci 2020 169 108594 10.1016/j.corsci.2020.108594 Search in Google Scholar

[35] Lashgari HR, Xue Y, Onggowarsito C, Kong C, Li S. Microstructure, tribological properties and corrosion behaviour of additively manufactured 17-4PH stainless steel: effects of scanning pattern, build orientation, and single vs. double scan. Mater Today Commun. 2020;25: 101535. LashgariHR XueY OnggowarsitoC KongC LiS Microstructure, tribological properties and corrosion behaviour of additively manufactured 17-4PH stainless steel: effects of scanning pattern, build orientation, and single vs. double scan Mater Today Commun 2020 25 101535 10.1016/j.mtcomm.2020.101535 Search in Google Scholar

[36] Jacob G. Prediction of solidification phases in Cr-Ni stainless steel alloys manufactured by laser based powder bed fusion process. Gaithersburg, MD: National Institute of Standards and Technology; 2018 Mar p. NIST AMS 100-14. Report Number: NIST AMS 100-14. JacobG Prediction of solidification phases in Cr-Ni stainless steel alloys manufactured by laser based powder bed fusion process Gaithersburg, MD National Institute of Standards and Technology 2018 Mar p. NIST AMS 100-14. Report Number: NIST AMS 100-14. 10.6028/NIST.AMS.100-14 Search in Google Scholar

[37] Eskandari H, Lashgari HR, Ye L, Eizadjou M, Wang H. Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel. Mater Today Commun. 2022;30: 103075. EskandariH LashgariHR YeL EizadjouM WangH Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel Mater Today Commun 2022 30 103075 10.1016/j.mtcomm.2021.103075 Search in Google Scholar

[38] Wang Z, Luan W, Huang J, Jiang C. XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PH. Mater Sci Eng A. 2011;528(21): 6417–25. WangZ LuanW HuangJ JiangC XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PH Mater Sci Eng A 2011 528 21 6417 25 10.1016/j.msea.2011.03.098 Search in Google Scholar

[39] Mathoho I, Akinlabi ET, Arthur N, Tlotleng M, Masina B. Metallurgical characteristics of laser peened 17-4 PH SS processed by LENS technique. In: The Minerals, Metals & Materials Series (eds) TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham: Springer International Publishing; 2019. p. 279–85. (The Minerals, Metals & Materials Series). MathohoI AkinlabiET ArthurN TlotlengM MasinaB Metallurgical characteristics of laser peened 17-4 PH SS processed by LENS technique In: The Minerals, Metals & Materials Series (eds) TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings Cham Springer International Publishing 2019 279 85 (The Minerals, Metals & Materials Series). 10.1007/978-3-030-05861-6_25 Search in Google Scholar

[40] Bagherifard S, Ghelichi R, Guagliano M. Numerical and experimental analysis of surface roughness generated by shot peening. Appl Surf Sci. 2012;258(18): 6831–40. BagherifardS GhelichiR GuaglianoM Numerical and experimental analysis of surface roughness generated by shot peening Appl Surf Sci 2012 258 18 6831 40 10.1016/j.apsusc.2012.03.111 Search in Google Scholar

[41] Higounenc O. Correlation of shot peening parameters to surface characteristic. 2005. In: ICSP9: 9th International Conference on Shot Peening, Marne la Vallée, France, 6-9.09.2005. HigounencO Correlation of shot peening parameters to surface characteristic 2005 In: ICSP9: 9th International Conference on Shot Peening Marne la Vallée, France 6-9.09.2005. Search in Google Scholar

[42] Walczak M, Szala M. Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing. Archiv Civ Mech Eng. 2021;21(4): 157. WalczakM SzalaM Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing Archiv Civ Mech Eng 2021 21 4 157 10.1007/s43452-021-00306-3 Search in Google Scholar

[43] Sanaei N, Fatemi A. Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals. Theor Appl Fract Mech. 2020;108: 102638. SanaeiN FatemiA Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals Theor Appl Fract Mech 2020 108 102638 10.1016/j.tafmec.2020.102638 Search in Google Scholar

[44] Cheruvathur S, Lass EA, Campbell CE. Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure. JOM. 2016;68(3): 930–42. CheruvathurS LassEA CampbellCE Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure JOM 2016 68 3 930 42 10.1007/s11837-015-1754-4 Search in Google Scholar

[45] Maleki E, Unal O, Reza Kashyzadeh K, Bagherifard S, Guagliano M. A systematic study on the effects of shot peening on a mild carbon steel: microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimens. Appl Surf Sci Adv. 2021;4: 100071. MalekiE UnalO Reza KashyzadehK BagherifardS GuaglianoM A systematic study on the effects of shot peening on a mild carbon steel: microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimens Appl Surf Sci Adv 2021 4 100071 10.1016/j.apsadv.2021.100071 Search in Google Scholar

[46] Guennouni N, Barroux A, Grosjean C, Maisonnette D, Nivet E, Andrieu E, et al. Comparative study of the microstructure between a laser beam melted 17-4PH stainless steel and its conventional counterpart. Mater Sci Eng A. 2021;823: 141718. GuennouniN BarrouxA GrosjeanC MaisonnetteD NivetE AndrieuE Comparative study of the microstructure between a laser beam melted 17-4PH stainless steel and its conventional counterpart Mater Sci Eng A 2021 823 141718 10.1016/j.msea.2021.141718 Search in Google Scholar

[47] Efe Y, Karademir I, Husem F, Maleki E, Karimbaev R, Amanov A, et al. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification. Appl Surf Sci. 2020;528: 146922. EfeY KarademirI HusemF MalekiE KarimbaevR AmanovA Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification Appl Surf Sci 2020 528 146922 10.1016/j.apsusc.2020.146922 Search in Google Scholar

[48] Kameyama Y, Komotori J. Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials. J Mater Process Technol. 2009;209(20): 6146–55. KameyamaY KomotoriJ Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials J Mater Process Technol 2009 209 20 6146 55 10.1016/j.jmatprotec.2009.08.010 Search in Google Scholar

[49] Soleimani M, Mirzadeh H, Dehghanian C. Effect of grain size on the corrosion resistance of low carbon steel. Mater Res Express. 2020;7(1): 016522. SoleimaniM MirzadehH DehghanianC Effect of grain size on the corrosion resistance of low carbon steel Mater Res Express 2020 7 1 016522 10.1088/2053-1591/ab62fa Search in Google Scholar

[50] Qiao M, Hu J, Guo K, Wang Q. Influence of shot peening on corrosion behavior of low alloy steel. Mater Res Express. 2020;7(1): 016574. QiaoM HuJ GuoK WangQ Influence of shot peening on corrosion behavior of low alloy steel Mater Res Express 2020 7 1 016574 10.1088/2053-1591/ab6920 Search in Google Scholar