This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Dimiduk DM, Perepezko JH. Mo-Si-B alloys: developing a revolutionary turbine-engine material. MRS Bull. 2003;28(9):639–45. https://doi.org/10.1557/mrs2003.191DimidukDMPerepezkoJHMo-Si-B alloys: developing a revolutionary turbine-engine materialMRS Bull200328963945https://doi.org/10.1557/mrs2003.19110.1557/mrs2003.191Search in Google Scholar
Perepezko JH. The hotter the engine, the better. Science. 2009;326(5956):1068–9. https://doi.org/10.1126/science.1179327PerepezkoJHThe hotter the engine, the betterScience2009326595610689https://doi.org/10.1126/science.117932710.1126/science.117932719965415Search in Google Scholar
Darolia R. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects. Int Mater Rev. 2013;58(6):315–48. https://doi.org/10.1179/1743280413Y.0000000019DaroliaRThermal barrier coatings technology: critical review, progress update, remaining challenges and prospectsInt Mater Rev201358631548https://doi.org/10.1179/1743280413Y.000000001910.1179/1743280413Y.0000000019Search in Google Scholar
Moskal G, Swadźba L, Mendala B, Góral M, Hetmańczyk M. Degradation of the TBC system during the static oxidation test. J Microsc. 2010;237(3):450–5. https://doi.org/10.1111/j.1365-2818.2009.03290.xMoskalGSwadźbaLMendalaBGóralMHetmańczykMDegradation of the TBC system during the static oxidation testJ Microsc201023734505https://doi.org/10.1111/j.1365-2818.2009.03290.x10.1111/j.1365-2818.2009.03290.x20500416Search in Google Scholar
Feuerstein A, Knapp J, Taylor T, Ashary A, Bolcavage A, Hitchman N. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: A review. J Therm Spray Technol. 2008;17(2):199–213. https://doi.org/10.1007/s11666-007-9148-yFeuersteinAKnappJTaylorTAsharyABolcavageAHitchmanNTechnical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: A reviewJ Therm Spray Technol2008172199213https://doi.org/10.1007/s11666-007-9148-y10.1007/s11666-007-9148-ySearch in Google Scholar
Rezanka S, Mack DE, Mauer G, Sebold D, Guillon O, Vaßen R. Investigation of the resistance of open-column-structured PS-PVD TBCs to erosive and high-temperature corrosive attack. Surf Coat Technol. 2017;324:222–35. https://doi.org/10.1016/J.SURFCOAT.2017.05.003RezankaSMackDEMauerGSeboldDGuillonOVaßenRInvestigation of the resistance of open-column-structured PS-PVD TBCs to erosive and high-temperature corrosive attackSurf Coat Technol201732422235https://doi.org/10.1016/J.SURFCOAT.2017.05.00310.1016/j.surfcoat.2017.05.003Search in Google Scholar
Rakhadilov BK, Kenesbekov AB, Kowalevski P, Ocheredko IA, Sagdoldina ZB. Development of air-plasma technology for hardening cutting tools by applying wear-resistant coatings. News Natl Acad Sci Repub Kazakhstan, Ser Geol Tech Sci. 2020;3(441):54–62. https://doi.org/10.32014/2020.2518-170X.54RakhadilovBKKenesbekovABKowalevskiPOcheredkoIASagdoldinaZBDevelopment of air-plasma technology for hardening cutting tools by applying wear-resistant coatingsNews Natl Acad Sci Repub Kazakhstan, Ser Geol Tech Sci202034415462https://doi.org/10.32014/2020.2518-170X.5410.32014/2020.2518-170X.54Search in Google Scholar
Bernard B, Quet A, Bianchi L, Joulia A, Malié A, Schick V, et al. Thermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS). Surf Coat Technol. 2017;318:122–8. https://doi.org/10.1016/j.surfcoat.2016.06.010BernardBQuetABianchiLJouliaAMaliéASchickVThermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS)Surf Coat Technol20173181228https://doi.org/10.1016/j.surfcoat.2016.06.01010.1016/j.surfcoat.2016.06.010Search in Google Scholar
Goral M, Kotowski S, Sieniawski J. The technology of plasma spray physical vapour deposition. High Temp Mater Process. 2013;32(1):33–9. https://doi.org/10.1515/htmp-2012-0051GoralMKotowskiSSieniawskiJThe technology of plasma spray physical vapour depositionHigh Temp Mater Process2013321339https://doi.org/10.1515/htmp-2012-005110.1515/htmp-2012-0051Search in Google Scholar
Zhou D, Guillon O, Vaßen R. Development of YSZ thermal barrier coatings using axial suspension plasma spraying. Coatings. 2017;7(8):120–37. https://doi.org/10.3390/coatings7080120ZhouDGuillonOVaßenRDevelopment of YSZ thermal barrier coatings using axial suspension plasma sprayingCoatings20177812037https://doi.org/10.3390/coatings708012010.3390/coatings7080120Search in Google Scholar
von Niessen K, Gindrat M. Plasma spray-PVD: a new thermal spray process to deposit out of the vapor phase. J Therm Spray Technol. 2011;20(4):736–43. https://doi.org/10.1007/s11666-011-9654-9von NiessenKGindratMPlasma spray-PVD: a new thermal spray process to deposit out of the vapor phaseJ Therm Spray Technol201120473643https://doi.org/10.1007/s11666-011-9654-910.1007/s11666-011-9654-9Search in Google Scholar
Sokołowski P, Nylen P, Musalek R, Łatka L, Kozerski S, Dietrich D, et al. The microstructural studies of suspension plasma sprayed zirconia coatings with the use of high-energy plasma torches. Surf Coat Technol. 2017;318:250–61. https://doi.org/10.1016/j.surfcoat.2017.03.025SokołowskiPNylenPMusalekRŁatkaLKozerskiSDietrichDThe microstructural studies of suspension plasma sprayed zirconia coatings with the use of high-energy plasma torchesSurf Coat Technol201731825061https://doi.org/10.1016/j.surfcoat.2017.03.02510.1016/j.surfcoat.2017.03.025Search in Google Scholar
Fauchais P, Vardelle M, Goutier S, Vardelle A. Key challenges and opportunities in suspension and solution plasma spraying. Plasma Chem Plasma Process. 2014;35(3):511–25. https://doi.org/10.1007/s11090-014-9594-5FauchaisPVardelleMGoutierSVardelleAKey challenges and opportunities in suspension and solution plasma sprayingPlasma Chem Plasma Process201435351125https://doi.org/10.1007/s11090-014-9594-510.1007/s11090-014-9594-5Search in Google Scholar
Góral M, Kubaszek T, Kotowski S, Sieniawski J, Dudek S. Influence of deposition parameters on structure of TBCS deposited by PS-PVD method. Solid State Phenom. 2015;227:369–72. https://doi.org/10.4028/www.scientific.net/SSP.227.369GóralMKubaszekTKotowskiSSieniawskiJDudekSInfluence of deposition parameters on structure of TBCS deposited by PS-PVD methodSolid State Phenom201522736972https://doi.org/10.4028/www.scientific.net/SSP.227.36910.4028/www.scientific.net/SSP.227.369Search in Google Scholar
Góral M, Kubaszek T. The influence of process parameters on structure of ceramic coatings deposited by PS-PVD method. Solid State Phenom. 2017;267:243–7. https://doi.org/10.4028/www.scientific.net/SSP.267.243GóralMKubaszekTThe influence of process parameters on structure of ceramic coatings deposited by PS-PVD methodSolid State Phenom20172672437https://doi.org/10.4028/www.scientific.net/SSP.267.24310.4028/www.scientific.net/SSP.267.243Search in Google Scholar
Bacciochini A, Ben-Ettouil F, Brousse E, Ilavsky J, Montavon G, Denoirjean A, et al. Quantification of void networks of as-sprayed and annealed nanostructured yttria-stabilized zirconia (YSZ) deposits manufactured by suspension plasma spraying. Surf Coatings Technol. 2010;205(3):683–9. https://doi.org/10.1016/j.surfcoat.2010.06.013BacciochiniABen-EttouilFBrousseEIlavskyJMontavonGDenoirjeanAQuantification of void networks of as-sprayed and annealed nanostructured yttria-stabilized zirconia (YSZ) deposits manufactured by suspension plasma sprayingSurf Coatings Technol201020536839https://doi.org/10.1016/j.surfcoat.2010.06.01310.1016/j.surfcoat.2010.06.013Search in Google Scholar
Fauchais P, Etchart-Salas R, Rat V, Coudert JF, Caron N, Wittmann-Ténèze K. Parameters controlling liquid plasma spraying: solutions, sols, or suspensions. J Therm Spray Technol. 2008;17(1):31–59. https://doi.org/10.1007/s11666-007-9152-2FauchaisPEtchart-SalasRRatVCoudertJFCaronNWittmann-TénèzeKParameters controlling liquid plasma spraying: solutions, sols, or suspensionsJ Therm Spray Technol20081713159https://doi.org/10.1007/s11666-007-9152-210.1007/s11666-007-9152-2Search in Google Scholar
Łatka L, Cattini A, Pawłowski L, Valette S, Pateyron B, Lecompte JP, et al. Thermal diffusivity and conductivity of yttria stabilized zirconia coatings obtained by suspension plasma spraying. Surf Coat Technol. 2012;208:87–91. https://doi.org/10.1016/j.surfcoat.2012.08.014ŁatkaLCattiniAPawłowskiLValetteSPateyronBLecompteJPThermal diffusivity and conductivity of yttria stabilized zirconia coatings obtained by suspension plasma sprayingSurf Coat Technol20122088791https://doi.org/10.1016/j.surfcoat.2012.08.01410.1016/j.surfcoat.2012.08.014Search in Google Scholar
Bernard B, Schick V, Remy B, Quet A, Bianchi L. High temperature thermal properties of columnar yttria stabilized zirconia thermal barrier coating performed by suspension plasma spraying. J Phys Conf Ser. 2016;745:1–8. https://doi.org/10.1088/1742-6596/745/3/032012BernardBSchickVRemyBQuetABianchiLHigh temperature thermal properties of columnar yttria stabilized zirconia thermal barrier coating performed by suspension plasma sprayingJ Phys Conf Ser201674518https://doi.org/10.1088/1742-6596/745/3/03201210.1088/1742-6596/745/3/032012Search in Google Scholar
Algenaid W, Ganvir A, Calinas RF, Varghese J, Rajulapati KV, Joshi S. Influence of microstructure on the erosion behaviour of suspension plasma sprayed thermal barrier coatings. Surf Coat Technol. 2019;375:86–99. https://doi.org/10.1016/j.surfcoat.2019.06.075AlgenaidWGanvirACalinasRFVargheseJRajulapatiKVJoshiSInfluence of microstructure on the erosion behaviour of suspension plasma sprayed thermal barrier coatingsSurf Coat Technol20193758699https://doi.org/10.1016/j.surfcoat.2019.06.07510.1016/j.surfcoat.2019.06.075Search in Google Scholar
Hospach A, Mauer G, Vaen R, Stöver D. Columnar-structured thermal barrier coatings (TBCs) by thin film low-pressure plasma spraying (LPPS-TF). J Therm Spray Technol. 2011;20(1–2):116–20. https://doi.org/10.1007/s11666-010-9549-1HospachAMauerGVaenRStöverDColumnar-structured thermal barrier coatings (TBCs) by thin film low-pressure plasma spraying (LPPS-TF)J Therm Spray Technol2011201–211620https://doi.org/10.1007/s11666-010-9549-110.1007/s11666-010-9549-1Search in Google Scholar
Dwivedi G, Viswanathan V, Sampath S, Shyam A, Lara-Curzio E. Fracture toughness of plasma-sprayed thermal barrier ceramics: influence of processing, microstructure, and thermal aging. J Am Ceram Soc. 2014;97(9):2736–44. https://doi.org/10.1111/jace.13021DwivediGViswanathanVSampathSShyamALara-CurzioEFracture toughness of plasma-sprayed thermal barrier ceramics: influence of processing, microstructure, and thermal agingJ Am Ceram Soc2014979273644https://doi.org/10.1111/jace.1302110.1111/jace.13021Search in Google Scholar
Huang J, Wang W, Lu X, Liu S, Li C. Influence of lamellar interface morphology on cracking resistance of plasma-sprayed YSZ coatings. Coatings. 2018;8(5):1–15. https://doi.org/10.3390/coatings8050187HuangJWangWLuXLiuSLiCInfluence of lamellar interface morphology on cracking resistance of plasma-sprayed YSZ coatingsCoatings201885115https://doi.org/10.3390/coatings805018710.3390/coatings8050187Search in Google Scholar
Gao Y, Zhao Y, Yang D, Gao J. A novel plasma-sprayed nanostructured coating with agglomerated-unsintered feedstock. J Therm Spray Technol. 2016;25(1–2):291–300. https://doi.org/10.1007/s11666-015-0340-1GaoYZhaoYYangDGaoJA novel plasma-sprayed nanostructured coating with agglomerated-unsintered feedstockJ Therm Spray Technol2016251–2291300https://doi.org/10.1007/s11666-015-0340-110.1007/s11666-015-0340-1Search in Google Scholar
Kubaszek T, Góral M. Influence of air plasma spraying process parameters on ceramic layer in thermal barrier coatings. Solid State Phenom. 2017;267:207–11. https://doi.org/10.4028/www.scientific.net/SSP.267.207KubaszekTGóralMInfluence of air plasma spraying process parameters on ceramic layer in thermal barrier coatingsSolid State Phenom201726720711https://doi.org/10.4028/www.scientific.net/SSP.267.20710.4028/www.scientific.net/SSP.267.207Search in Google Scholar
Chyrkin A, Gunduz KO, Fedorova I, Sattari M, Visibile A, Halvarsson M, et al. High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size. Corros Sci. 2022;205(December 2021):110382. https://doi.org/10.1016/j.corsci.2022.110382ChyrkinAGunduzKOFedorovaISattariMVisibileAHalvarssonMHigh-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain sizeCorros Sci2022205December2021110382. https://doi.org/10.1016/j.corsci.2022.11038210.1016/j.corsci.2022.110382Search in Google Scholar
Aranke O, Gupta M, Markocsan N. Microstructural evolution and sintering of suspension plasma-sprayed columnar thermal barrier coatings. J Therm Spray Tech. 2019;28(1–2):198–211. https://doi.org/10.1007/s11666-018-0778-zArankeOGuptaMMarkocsanNMicrostructural evolution and sintering of suspension plasma-sprayed columnar thermal barrier coatingsJ Therm Spray Tech2019281–2198211https://doi.org/10.1007/s11666-018-0778-z10.1007/s11666-018-0778-zSearch in Google Scholar
Oerlikon Metco. Metco 6609 – material product data sheet Internet.. cited 2022 Nov 14. https://www.oerlikon.com/ecoma/files/DSM-0406.2_ZrO2_8Y2O3_Suspensions.pdf (accessed 2022-11-14)Oerlikon MetcoMetco 6609 – material product data sheet Internetcited 2022 Nov 14. https://www.oerlikon.com/ecoma/files/DSM-0406.2_ZrO2_8Y2O3_Suspensions.pdf (accessed 2022-11-14)Search in Google Scholar
Mauer G, Vaßen R. Plasma Spray-PVD: plasma characteristics and impact on coating properties. J Phys Conf Ser. 2012;406(1):012005. https://doi.org/10.1088/1742-6596/406/1/012005MauerGVaßenRPlasma Spray-PVD: plasma characteristics and impact on coating propertiesJ Phys Conf Ser20124061012005https://doi.org/10.1088/1742-6596/406/1/01200510.1088/1742-6596/406/1/012005Search in Google Scholar
Oerlikon Metco. Metco 204NS – material product data sheet Internet.. cited 2022 Nov 14. https://www.oerlikon.com/ecoma/files/DSM-0242.5_8YO_ZrO_HOSP.pdf (accessed 2022-11-14)Oerlikon MetcoMetco 204NS – material product data sheet Internetcited 2022 Nov 14. https://www.oerlikon.com/ecoma/files/DSM-0242.5_8YO_ZrO_HOSP.pdf (accessed 2022-11-14)Search in Google Scholar
Fauchais PL, Heberlein JVR, Boulos MI. Thermal spray fundamentals. Boston: Springer; 2014. https://doi.org/10.1007/978-0-387-68991-3_1FauchaisPLHeberleinJVRBoulosMIThermal spray fundamentalsBostonSpringer2014https://doi.org/10.1007/978-0-387-68991-3_110.1007/978-0-387-68991-3Search in Google Scholar
Nicoll AR, Gruner H, Prince R, Wuest G. Thermal spray coatings for high temperature protection. Surf Eng. 1985;1(1):59–71. https://doi.org/10.1179/sur.1985.1.1.59NicollARGrunerHPrinceRWuestGThermal spray coatings for high temperature protectionSurf Eng1985115971https://doi.org/10.1179/sur.1985.1.1.5910.1179/sur.1985.1.1.59Search in Google Scholar
Liu SH, Trelles JP, Murphy AB, He WT, Shi J, Li S, et al. Low-pressure plasma-induced physical vapor deposition of advanced thermal barrier coatings: microstructures, modelling and mechanisms. Mater Today Phys. 2021;21:100481. https://doi.org/10.1016/j.mtphys.2021.100481LiuSHTrellesJPMurphyABHeWTShiJLiSLow-pressure plasma-induced physical vapor deposition of advanced thermal barrier coatings: microstructures, modelling and mechanismsMater Today Phys202121100481. https://doi.org/10.1016/j.mtphys.2021.10048110.1016/j.mtphys.2021.100481Search in Google Scholar
Zhang B, Wei L, Guo H, Xu H. Microstructures and deposition mechanisms of quasi-columnar structured yttria-stabilized zirconia coatings by plasma spray physical vapor deposition. Ceram Int. 2017;43(15):12920–9. https://doi.org/10.1016/j.ceramint.2017.06.190ZhangBWeiLGuoHXuHMicrostructures and deposition mechanisms of quasi-columnar structured yttria-stabilized zirconia coatings by plasma spray physical vapor depositionCeram Int20174315129209https://doi.org/10.1016/j.ceramint.2017.06.19010.1016/j.ceramint.2017.06.190Search in Google Scholar
Seshadri RC, Dwivedi G, Viswanathan V, Sampath S. Characterizing suspension plasma spray coating formation dynamics through curvature measurements. J Therm Spray Technol. 2016;25(8):1666–83. https://doi.org/10.1007/s11666-016-0460-2SeshadriRCDwivediGViswanathanVSampathSCharacterizing suspension plasma spray coating formation dynamics through curvature measurementsJ Therm Spray Technol2016258166683https://doi.org/10.1007/s11666-016-0460-210.1007/s11666-016-0460-2Search in Google Scholar