Influence of optimization techniques and nano surface coating materials on microstructure of iron-nickel-chromium alloy using wire EDM process

[1] Ablyaz, T.R. and Belinin, D.S., 2014. Wire electrical discharge machining of items after plasmatic surface hardening. Middle-East Journal of Scientific Research, 19(8), pp.1096–1098. AblyazT.R. BelininD.S. 2014 Wire electrical discharge machining of items after plasmatic surface hardening Middle-East Journal of Scientific Research 19 8 1096 1098 Search in Google Scholar

[2] Altug, M., Erdem, M. and Ozay, C., 2015. Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm. The International Journal of Advanced Manufacturing Technology, 78(9–12), pp.1573–1583. AltugM. ErdemM. OzayC. 2015 Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm The International Journal of Advanced Manufacturing Technology 78 9–12 1573 1583 10.1007/s00170-014-6702-x Search in Google Scholar

[3] Azam, M., Jahanzaib, M., Abbasi, J.A., Abbas, M., Wasim, A. and Hussain, S., 2016. Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel. The International Journal of Advanced Manufacturing Technology, 87(1–4), pp.713–722. AzamM. JahanzaibM. AbbasiJ.A. AbbasM. WasimA. HussainS. 2016 Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel The International Journal of Advanced Manufacturing Technology 87 1–4 713 722 10.1007/s00170-016-8518-3 Search in Google Scholar

[4] Bosheh, S.S. and Mativenga, P.T., 2006. White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling. International Journal of Machine Tools and Manufacture, 46(2), pp.225–233. BoshehS.S. MativengaP.T. 2006 White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling International Journal of Machine Tools and Manufacture 46 2 225 233 10.1016/j.ijmachtools.2005.04.009 Search in Google Scholar

[5] Çaydaş, U., Hasçalık, A. and Ekici, S., 2009. An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM. Expert Systems with Applications, 36(3), pp.6135–6139. ÇaydaşU. HasçalıkA. EkiciS. 2009 An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM Expert Systems with Applications 36 3 6135 6139 10.1016/j.eswa.2008.07.019 Search in Google Scholar

[6] Choi, K.K., Nam, W.J. and Lee, Y.S., 2008. Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM. Journal of materials processing technology, 201(1–3), pp.580–584. ChoiK.K. NamW.J. LeeY.S. 2008 Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM Journal of materials processing technology 201 1–3 580 584 10.1016/j.jmatprotec.2007.11.156 Search in Google Scholar

[7] Dhobe, M.M., Chopde, I.K. and Gogte, C.L., 2013. Effect of heat treatment and process parameters on surface roughness in wire electro discharge machining. Int. J. Mech. Eng. & Rob. Res, 2(2), pp.275–281. DhobeM.M. ChopdeI.K. GogteC.L. 2013 Effect of heat treatment and process parameters on surface roughness in wire electro discharge machining Int. J. Mech. Eng. & Rob. Res 2 2 275 281 Search in Google Scholar

[8] Dhobe, M.M., Chopde, I.K. and Gogte, C.L., 2013. Investigations on surface characteristics of heat treated tool steel after wire electro-discharge machining. Materials and manufacturing processes, 28(10), pp.1143–1146. DhobeM.M. ChopdeI.K. GogteC.L. 2013 Investigations on surface characteristics of heat treated tool steel after wire electro-discharge machining Materials and manufacturing processes 28 10 1143 1146 10.1080/10426914.2013.822976 Search in Google Scholar

[9] Garg, R.K., Singh, K.K., Sachdeva, A., Sharma, V.S., Ojha, K. and Singh, S., 2010. Review of research work in sinking EDM and WEDM on metal matrix composite materials. The International Journal of Advanced Manufacturing Technology, 50(5–8), pp.611–624. GargR.K. SinghK.K. SachdevaA. SharmaV.S. OjhaK. SinghS. 2010 Review of research work in sinking EDM and WEDM on metal matrix composite materials The International Journal of Advanced Manufacturing Technology 50 5–8 611 624 10.1007/s00170-010-2534-5 Search in Google Scholar

[10] Kapoor, J., Khamba, J.S. and Singh, S., 2012. The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM. International Journal of Machining and Machinability of Materials 2, 12(1–2), pp.126–141. KapoorJ. KhambaJ.S. SinghS. 2012 The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM International Journal of Machining and Machinability of Materials 2 12 1–2 126 141 10.1504/IJMMM.2012.048562 Search in Google Scholar

[11] Khan, A.A., Ali, M.B.M. and Shaffiar, N.B.M., 2006. Relationship of surface roughness with current and voltage during wire EDM. Journal of applied sciences, 6(10), pp.2317–2320. KhanA.A. AliM.B.M. ShaffiarN.B.M. 2006 Relationship of surface roughness with current and voltage during wire EDM Journal of applied sciences 6 10 2317 2320 10.3923/jas.2006.2317.2320 Search in Google Scholar

[12] Manevski, K., Børgesen, C.D., Li, X., Andersen, M.N., Abrahamsen, P., Hu, C. and Hansen, S., 2016. Integrated modelling of crop production and nitrate leaching with the Daisy model. MethodsX, 3, pp.350–363. ManevskiK. BørgesenC.D. LiX. AndersenM.N. AbrahamsenP. HuC. HansenS. 2016 Integrated modelling of crop production and nitrate leaching with the Daisy model MethodsX 3 350 363 10.1016/j.mex.2016.04.008486563527222825 Search in Google Scholar

[13] Marafona, J.D. and Araujo, A., 2009. Influence of work-piece hardness on EDM performance. International Journal of Machine Tools and Manufacture, 49(9), pp.744–748. MarafonaJ.D. AraujoA. 2009 Influence of work-piece hardness on EDM performance International Journal of Machine Tools and Manufacture 49 9 744 748 10.1016/j.ijmachtools.2009.03.002 Search in Google Scholar

[14] Morotti, S. and Grandi, E., 2017. Logistic regression analysis of populations of electrophysiological models to assess proarrythmic risk. MethodsX, 4, pp.25–34. MorottiS. GrandiE. 2017 Logistic regression analysis of populations of electrophysiological models to assess proarrythmic risk MethodsX 4 25 34 10.1016/j.mex.2016.12.002 Search in Google Scholar

[15] Nain, S.S., Garg, D. and Kumar, S., 2018. Investigation for obtaining the optimal solution for improving the performance of WEDM of super alloy Udimet-L605 using particle swarm optimization. Engineering science and technology, an international journal, 21(2), pp.261–273. NainS.S. GargD. KumarS. 2018 Investigation for obtaining the optimal solution for improving the performance of WEDM of super alloy Udimet-L605 using particle swarm optimization Engineering science and technology, an international journal 21 2 261 273 10.1016/j.jestch.2018.03.005 Search in Google Scholar

[16] Newton, T.R., Melkote, S.N., Watkins, T.R., Trejo, R.M. and Reister, L., 2009. Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 718. Materials Science and Engineering: A, 513, pp.208–215. NewtonT.R. MelkoteS.N. WatkinsT.R. TrejoR.M. ReisterL. 2009 Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 718 Materials Science and Engineering: A 513 208 215 10.1016/j.msea.2009.01.061 Search in Google Scholar

[17] Prasad, K.S., Rao, C.S. and Rao, D.N., 2011. Establishing empirical relationships to predict grain size and hardness of pulsed current microplasma arc welded Inconel 625 sheets. Journal of Materials & Metallurgical Engineering, 1(3), pp.1–10. PrasadK.S. RaoC.S. RaoD.N. 2011 Establishing empirical relationships to predict grain size and hardness of pulsed current microplasma arc welded Inconel 625 sheets Journal of Materials & Metallurgical Engineering 1 3 1 10 Search in Google Scholar

[18] Rao, P.S., Ramji, K. and Satyanarayana, B., 2011. Effect of WEDM conditions on surface roughness: A parametric optimization using Taguchi method. International journal of advanced engineering sciences and technologies, 6(1), pp.41–48. RaoP.S. RamjiK. SatyanarayanaB. 2011 Effect of WEDM conditions on surface roughness: A parametric optimization using Taguchi method International journal of advanced engineering sciences and technologies 6 1 41 48 Search in Google Scholar

[19] Rao, T.B. and Krishna, A.G., 2013. Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiC p MMC. Advances in Manufacturing, 1(3), pp.265–275. RaoT.B. KrishnaA.G. 2013 Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiC p MMC Advances in Manufacturing 1 3 265 275 10.1007/s40436-013-0029-y Search in Google Scholar

[20] Bharathi, R.S., Shanmugam, N.S., Kannan, R.M. and Vendan, S.A., 2018. Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel. High Temperature Materials and Processes, 37(3), pp.219–232. BharathiR.S. ShanmugamN.S. KannanR.M. VendanS.A. 2018 Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel High Temperature Materials and Processes 37 3 219 232 10.1515/htmp-2016-0087 Search in Google Scholar

[21] Sajjadi, S.A., Zolfaghari, G., Adab, H., Allahabadi, A. and Delsouz, M., 2017. Measurement and modeling of particulate matter concentrations: applying spatial analysis and regression techniques to assess air quality. MethodsX, 4, pp.372–390. SajjadiS.A. ZolfaghariG. AdabH. AllahabadiA. DelsouzM. 2017 Measurement and modeling of particulate matter concentrations: applying spatial analysis and regression techniques to assess air quality MethodsX 4 372 390 10.1016/j.mex.2017.09.006 Search in Google Scholar

[22] Sidhu, S.S., Batish, A. and Kumar, S., 2013. Neural network–based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), pp.1679–1692. SidhuS.S. BatishA. KumarS. 2013 Neural network–based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227 11 1679 1692 10.1177/0954405413492505 Search in Google Scholar

[23] Singh, R. and Singh, B., 2011. Comparison of cryo-treatment effect on machining characteristics of titanium in electric discharge machining. International Journal of Automotive and Mechanical Engineering, 3, pp.239–48. SinghR. SinghB. 2011 Comparison of cryo-treatment effect on machining characteristics of titanium in electric discharge machining International Journal of Automotive and Mechanical Engineering 3 239 48 10.15282/ijame.3.2011.1.0020 Search in Google Scholar

[24] Sone, T. and Masui, K., 1991. Application of ion nitriding to wire-electrical-discharge-machined blanking dies. Materials Science and Engineering: A, 140, pp.486–493. SoneT. MasuiK. 1991 Application of ion nitriding to wire-electrical-discharge-machined blanking dies Materials Science and Engineering: A 140 486 493 10.1016/0921-5093(91)90467-2 Search in Google Scholar

[25] Srinivasan, R.G., Selvabharathi, R., Palani, S. and Karuppasamy, R., 2019. Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment. Materials Research Express, 6(8), p.086584. SrinivasanR.G. SelvabharathiR. PalaniS. KaruppasamyR. 2019 Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment Materials Research Express 6 8 086584 10.1088/2053-1591/ab1eee Search in Google Scholar

[26] Tarng, Y.S., Ma, S.C. and Chung, L.K., 1995. Determination of optimal cutting parameters in wire electrical discharge machining. International Journal of Machine Tools and Manufacture, 35(12), pp.1693–1701. TarngY.S. MaS.C. ChungL.K. 1995 Determination of optimal cutting parameters in wire electrical discharge machining International Journal of Machine Tools and Manufacture 35 12 1693 1701 10.1016/0890-6955(95)00019-T Search in Google Scholar

[27] Warren, A.W., Guo, Y.B. and Weaver, M.L., 2006. The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation. Surface and Coatings Technology, 200(11), pp.3459–3467. WarrenA.W. GuoY.B. WeaverM.L. 2006 The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation Surface and Coatings Technology 200 11 3459 3467 10.1016/j.surfcoat.2004.12.028 Search in Google Scholar

[28] Williams, R.E. and Rajurkar, K.P., 1991. Study of wire electrical discharge machined surface characteristics. Journal of materials processing technology, 28(1–2), pp.127–138. WilliamsR.E. RajurkarK.P. 1991 Study of wire electrical discharge machined surface characteristics Journal of materials processing technology 28 1–2 127 138 10.1016/0924-0136(91)90212-W Search in Google Scholar

[29] Xiong, G., Zheng, M., Li, D., Zhao, L., Wang, Y. and Li, M., 2010, October. Study on the influence of non-electrical parameters on processing quality of WEDM-HS and improvement measures. In International Conference on Computer and Computing Technologies in Agriculture (pp. 514–520). Springer, Berlin, Heidelberg. XiongG. ZhengM. LiD. ZhaoL. WangY. LiM. 2010 October. Study on the influence of non-electrical parameters on processing quality of WEDM-HS and improvement measures In International Conference on Computer and Computing Technologies in Agriculture 514 520 Springer Berlin, Heidelberg 10.1007/978-3-642-18369-0_61 Search in Google Scholar