This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Ablyaz, T.R. and Belinin, D.S., 2014. Wire electrical discharge machining of items after plasmatic surface hardening. Middle-East Journal of Scientific Research, 19(8), pp.1096–1098.AblyazT.R.BelininD.S.2014Wire electrical discharge machining of items after plasmatic surface hardening19810961098Search in Google Scholar
Altug, M., Erdem, M. and Ozay, C., 2015. Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm. The International Journal of Advanced Manufacturing Technology, 78(9–12), pp.1573–1583.AltugM.ErdemM.OzayC.2015Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm789–121573158310.1007/s00170-014-6702-xSearch in Google Scholar
Azam, M., Jahanzaib, M., Abbasi, J.A., Abbas, M., Wasim, A. and Hussain, S., 2016. Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel. The International Journal of Advanced Manufacturing Technology, 87(1–4), pp.713–722.AzamM.JahanzaibM.AbbasiJ.A.AbbasM.WasimA.HussainS.2016Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel871–471372210.1007/s00170-016-8518-3Search in Google Scholar
Bosheh, S.S. and Mativenga, P.T., 2006. White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling. International Journal of Machine Tools and Manufacture, 46(2), pp.225–233.BoshehS.S.MativengaP.T.2006White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling46222523310.1016/j.ijmachtools.2005.04.009Search in Google Scholar
Çaydaş, U., Hasçalık, A. and Ekici, S., 2009. An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM. Expert Systems with Applications, 36(3), pp.6135–6139.ÇaydaşU.HasçalıkA.EkiciS.2009An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM3636135613910.1016/j.eswa.2008.07.019Search in Google Scholar
Choi, K.K., Nam, W.J. and Lee, Y.S., 2008. Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM. Journal of materials processing technology, 201(1–3), pp.580–584.ChoiK.K.NamW.J.LeeY.S.2008Effects of heat treatment on the surface of a die steel STD11 machined by W-EDM2011–358058410.1016/j.jmatprotec.2007.11.156Search in Google Scholar
Dhobe, M.M., Chopde, I.K. and Gogte, C.L., 2013. Effect of heat treatment and process parameters on surface roughness in wire electro discharge machining. Int. J. Mech. Eng. & Rob. Res, 2(2), pp.275–281.DhobeM.M.ChopdeI.K.GogteC.L.2013Effect of heat treatment and process parameters on surface roughness in wire electro discharge machining22275281Search in Google Scholar
Dhobe, M.M., Chopde, I.K. and Gogte, C.L., 2013. Investigations on surface characteristics of heat treated tool steel after wire electro-discharge machining. Materials and manufacturing processes, 28(10), pp.1143–1146.DhobeM.M.ChopdeI.K.GogteC.L.2013Investigations on surface characteristics of heat treated tool steel after wire electro-discharge machining28101143114610.1080/10426914.2013.822976Search in Google Scholar
Garg, R.K., Singh, K.K., Sachdeva, A., Sharma, V.S., Ojha, K. and Singh, S., 2010. Review of research work in sinking EDM and WEDM on metal matrix composite materials. The International Journal of Advanced Manufacturing Technology, 50(5–8), pp.611–624.GargR.K.SinghK.K.SachdevaA.SharmaV.S.OjhaK.SinghS.2010Review of research work in sinking EDM and WEDM on metal matrix composite materials505–861162410.1007/s00170-010-2534-5Search in Google Scholar
Kapoor, J., Khamba, J.S. and Singh, S., 2012. The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM. International Journal of Machining and Machinability of Materials 2, 12(1–2), pp.126–141.KapoorJ.KhambaJ.S.SinghS.2012The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM121–212614110.1504/IJMMM.2012.048562Search in Google Scholar
Khan, A.A., Ali, M.B.M. and Shaffiar, N.B.M., 2006. Relationship of surface roughness with current and voltage during wire EDM. Journal of applied sciences, 6(10), pp.2317–2320.KhanA.A.AliM.B.M.ShaffiarN.B.M.2006Relationship of surface roughness with current and voltage during wire EDM6102317232010.3923/jas.2006.2317.2320Search in Google Scholar
Manevski, K., Børgesen, C.D., Li, X., Andersen, M.N., Abrahamsen, P., Hu, C. and Hansen, S., 2016. Integrated modelling of crop production and nitrate leaching with the Daisy model. MethodsX, 3, pp.350–363.ManevskiK.BørgesenC.D.LiX.AndersenM.N.AbrahamsenP.HuC.HansenS.2016Integrated modelling of crop production and nitrate leaching with the Daisy model335036310.1016/j.mex.2016.04.008486563527222825Search in Google Scholar
Marafona, J.D. and Araujo, A., 2009. Influence of work-piece hardness on EDM performance. International Journal of Machine Tools and Manufacture, 49(9), pp.744–748.MarafonaJ.D.AraujoA.2009Influence of work-piece hardness on EDM performance49974474810.1016/j.ijmachtools.2009.03.002Search in Google Scholar
Morotti, S. and Grandi, E., 2017. Logistic regression analysis of populations of electrophysiological models to assess proarrythmic risk. MethodsX, 4, pp.25–34.MorottiS.GrandiE.2017Logistic regression analysis of populations of electrophysiological models to assess proarrythmic risk4253410.1016/j.mex.2016.12.002Search in Google Scholar
Nain, S.S., Garg, D. and Kumar, S., 2018. Investigation for obtaining the optimal solution for improving the performance of WEDM of super alloy Udimet-L605 using particle swarm optimization. Engineering science and technology, an international journal, 21(2), pp.261–273.NainS.S.GargD.KumarS.2018Investigation for obtaining the optimal solution for improving the performance of WEDM of super alloy Udimet-L605 using particle swarm optimization21226127310.1016/j.jestch.2018.03.005Search in Google Scholar
Newton, T.R., Melkote, S.N., Watkins, T.R., Trejo, R.M. and Reister, L., 2009. Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 718. Materials Science and Engineering: A, 513, pp.208–215.NewtonT.R.MelkoteS.N.WatkinsT.R.TrejoR.M.ReisterL.2009Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 71851320821510.1016/j.msea.2009.01.061Search in Google Scholar
Prasad, K.S., Rao, C.S. and Rao, D.N., 2011. Establishing empirical relationships to predict grain size and hardness of pulsed current microplasma arc welded Inconel 625 sheets. Journal of Materials & Metallurgical Engineering, 1(3), pp.1–10.PrasadK.S.RaoC.S.RaoD.N.2011Establishing empirical relationships to predict grain size and hardness of pulsed current microplasma arc welded Inconel 625 sheets13110Search in Google Scholar
Rao, P.S., Ramji, K. and Satyanarayana, B., 2011. Effect of WEDM conditions on surface roughness: A parametric optimization using Taguchi method. International journal of advanced engineering sciences and technologies, 6(1), pp.41–48.RaoP.S.RamjiK.SatyanarayanaB.2011Effect of WEDM conditions on surface roughness: A parametric optimization using Taguchi method614148Search in Google Scholar
Rao, T.B. and Krishna, A.G., 2013. Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiC p MMC. Advances in Manufacturing, 1(3), pp.265–275.RaoT.B.KrishnaA.G.2013Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiC p MMC1326527510.1007/s40436-013-0029-ySearch in Google Scholar
Bharathi, R.S., Shanmugam, N.S., Kannan, R.M. and Vendan, S.A., 2018. Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel. High Temperature Materials and Processes, 37(3), pp.219–232.BharathiR.S.ShanmugamN.S.KannanR.M.VendanS.A.2018Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel37321923210.1515/htmp-2016-0087Search in Google Scholar
Sajjadi, S.A., Zolfaghari, G., Adab, H., Allahabadi, A. and Delsouz, M., 2017. Measurement and modeling of particulate matter concentrations: applying spatial analysis and regression techniques to assess air quality. MethodsX, 4, pp.372–390.SajjadiS.A.ZolfaghariG.AdabH.AllahabadiA.DelsouzM.2017Measurement and modeling of particulate matter concentrations: applying spatial analysis and regression techniques to assess air quality437239010.1016/j.mex.2017.09.006Search in Google Scholar
Sidhu, S.S., Batish, A. and Kumar, S., 2013. Neural network–based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), pp.1679–1692.SidhuS.S.BatishA.KumarS.2013Neural network–based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites227111679169210.1177/0954405413492505Search in Google Scholar
Singh, R. and Singh, B., 2011. Comparison of cryo-treatment effect on machining characteristics of titanium in electric discharge machining. International Journal of Automotive and Mechanical Engineering, 3, pp.239–48.SinghR.SinghB.2011Comparison of cryo-treatment effect on machining characteristics of titanium in electric discharge machining32394810.15282/ijame.3.2011.1.0020Search in Google Scholar
Sone, T. and Masui, K., 1991. Application of ion nitriding to wire-electrical-discharge-machined blanking dies. Materials Science and Engineering: A, 140, pp.486–493.SoneT.MasuiK.1991Application of ion nitriding to wire-electrical-discharge-machined blanking dies14048649310.1016/0921-5093(91)90467-2Search in Google Scholar
Srinivasan, R.G., Selvabharathi, R., Palani, S. and Karuppasamy, R., 2019. Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment. Materials Research Express, 6(8), p.086584.SrinivasanR.G.SelvabharathiR.PalaniS.KaruppasamyR.2019Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment6808658410.1088/2053-1591/ab1eeeSearch in Google Scholar
Tarng, Y.S., Ma, S.C. and Chung, L.K., 1995. Determination of optimal cutting parameters in wire electrical discharge machining. International Journal of Machine Tools and Manufacture, 35(12), pp.1693–1701.TarngY.S.MaS.C.ChungL.K.1995Determination of optimal cutting parameters in wire electrical discharge machining35121693170110.1016/0890-6955(95)00019-TSearch in Google Scholar
Warren, A.W., Guo, Y.B. and Weaver, M.L., 2006. The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation. Surface and Coatings Technology, 200(11), pp.3459–3467.WarrenA.W.GuoY.B.WeaverM.L.2006The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation200113459346710.1016/j.surfcoat.2004.12.028Search in Google Scholar
Williams, R.E. and Rajurkar, K.P., 1991. Study of wire electrical discharge machined surface characteristics. Journal of materials processing technology, 28(1–2), pp.127–138.WilliamsR.E.RajurkarK.P.1991Study of wire electrical discharge machined surface characteristics281–212713810.1016/0924-0136(91)90212-WSearch in Google Scholar
Xiong, G., Zheng, M., Li, D., Zhao, L., Wang, Y. and Li, M., 2010, October. Study on the influence of non-electrical parameters on processing quality of WEDM-HS and improvement measures. In International Conference on Computer and Computing Technologies in Agriculture (pp. 514–520). Springer, Berlin, Heidelberg.XiongG.ZhengM.LiD.ZhaoL.WangY.LiM.2010October. Study on the influence of non-electrical parameters on processing quality of WEDM-HS and improvement measuresIn514520SpringerBerlin, Heidelberg10.1007/978-3-642-18369-0_61Search in Google Scholar