[
Abbas, M. Y., & Khan, M. I. (2016). Fiber-Matrix Interfacial Behavior of Hooked-End Steel Fiber-Reinforced Concrete. Journal of Materials in Civil Engineering, 28(11), 1–10. https://doi.org/10.1061/(asce)mt.1943-5533.0001626.10.1061/(ASCE)MT.1943-5533.0001626
]Search in Google Scholar
[
Abbas, S., Soliman, A. M., & Nehdi, M. L. (2015). Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Construction and Building Materials, 75, 429–441. https://doi.org/10.1016/j.conbuildmat.2014.11.017.10.1016/j.conbuildmat.2014.11.017
]Search in Google Scholar
[
Abbas, S., Soliman, A., Nehdi, M., Bai, J., Wild, S., Sabir, B. B., Tasdemir, C., Li, Z., Zhang, H., Wang, R., Office, J., Commissioner, A., Chen, Y., Matalkah, F., Yu, Y., Rankothge, W., Balachandra, A., Soroushian, P., Herald Lessly, S., … Wang, H. H. (2017). Influence of steel fiber distribution on splitting damage and transport properties of ultra-high performance concrete. Construction and Building Materials, 45(10), 104373. https://doi.org/10.1016/j.cemconcomp.2021.104373.10.1016/j.cemconcomp.2021.104373
]Search in Google Scholar
[
Abbas, Y. M., & Iqbal Khan, M. (2016). Fiber–Matrix Interactions in Fiber-Reinforced Concrete: A Review. Arabian Journal for Science and Engineering, 41(4), 1183–1198. https://doi.org/10.1007/s13369-016-2099-1.10.1007/s13369-016-2099-1
]Search in Google Scholar
[
Abdallah, S., Fan, M., & Rees, D. W. A. (2018). Bonding Mechanisms and Strength of Steel Fiber–Reinforced Cementitious Composites: Overview. Journal of Materials in Civil Engineering, 30(3), 04018001. https://doi.org/10.1061/(asce)mt.1943-5533.0002154.10.1061/(ASCE)MT.1943-5533.0002154
]Search in Google Scholar
[
Abu-Lebdeh, T., Hamoush, S., Heard, W., & Zornig, B. (2011). Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites. Construction and Building Materials, 25(1), 39–46. https://doi.org/10.1016/j.conbuildmat.2010.06.059.10.1016/j.conbuildmat.2010.06.059
]Search in Google Scholar
[
ACI 239. (2012). Committee in ultra-high performance concrete. ACI Annual Conference 2012, Toronto, ON, Canada; 2012.
]Search in Google Scholar
[
Akca, A. H., & Özyurt, N. (2018). Effects of re-curing on residual mechanical properties of concrete after high temperature exposure. Construction and Building Materials, 159, 540–552. https://doi.org/10.1016/j.conbuildmat.2017.11.005.10.1016/j.conbuildmat.2017.11.005
]Search in Google Scholar
[
Aldahdooh, M. A. A., Muhamad Bunnori, N., & Megat Johari, M. A. (2013). Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash. Construction and Building Materials, 48, 379–389. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.07.007.10.1016/j.conbuildmat.2013.07.007
]Search in Google Scholar
[
Alkaysi, M., El-Tawil, S., Liu, Z., & Hansen, W. (2016). Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC). Cement and Concrete Composites, 66, 47–56. https://doi.org/10.1016/j.cemconcomp.2015.11.005.10.1016/j.cemconcomp.2015.11.005
]Search in Google Scholar
[
Amriou, A., & Bencheikh, M. (2017). New experimental method for evaluating the water permeability of concrete by a lateral flow procedure on a hollow cylindrical test piece. Construction and Building Materials, 151, 642–649. https://doi.org/10.1016/j.conbuildmat.2017.06.126.10.1016/j.conbuildmat.2017.06.126
]Search in Google Scholar
[
Armelin, H. S., & Banthia, N. (1997). Predicting the flexural postcracking performance of steel fiber reinforced concrete from the pullout of single fibers. ACI Materials Journal, 94(1), 18–31. https://doi.org/10.14359/281.10.14359/281
]Search in Google Scholar
[
Arora, A., Aguayo, M., Hansen, H., Castro, C., Federspiel, E., Mobasher, B., & Neithalath, N. (2018). Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC). Cement and Concrete Research, 103, 179–190. https://doi.org/10.1016/j.cemconres.2017.10.013.10.1016/j.cemconres.2017.10.013
]Search in Google Scholar
[
Association Française de Génie Civil (AFGC). (2002). Service d’études techniques des routes et autoroutes Association Française de Génie Civil. Recommandations Provisoires, Janvier, France, 2002.
]Search in Google Scholar
[
ASTM C 109/C 109M-21. (2021). Standard test method for compressive strength of hydraulic cement mortars. Annual Book of ASTM Standards, 04, 9. https://www.astm.org/c0109_c0109m-21.html.
]Search in Google Scholar
[
ASTM C1202. (2012). Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration. American Society for Testing and Materials., C, 1–8. https://doi.org/10.1520/C1202-12.2.
]Search in Google Scholar
[
ASTM C1856 / C1856M-17. (2017). Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete. In ASTM International, West Conshohocken, PA.
]Search in Google Scholar
[
ASTM C989. (2005). Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars. ASTM International, i(February), 2–6. www.astm.org.
]Search in Google Scholar
[
Bache, H. (1981). Densified Cements Ultra-Fine Particle-Based Materials. Proceedings of the 2nd International Conference on Super Plasticizers in Concrete.
]Search in Google Scholar
[
Bangi, M. R., & Horiguchi, T. (2011). Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures. Cement and Concrete Research, 41(11), 1150–1156. https://doi.org/10.1016/j.cemconres.2011.07.001.10.1016/j.cemconres.2011.07.001
]Search in Google Scholar
[
Bangi, M. R., & Horiguchi, T. (2012). Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. Cement and Concrete Research, 42(2), 459–466. https://doi.org/10.1016/j.cemconres.2011.11.014.10.1016/j.cemconres.2011.11.014
]Search in Google Scholar
[
Banthia, N., & Sappakittipakorn, M. (2007). Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement and Concrete Research, 37(9), 1366–1372. https://doi.org/10.1016/j.cemconres.2007.05.005.10.1016/j.cemconres.2007.05.005
]Search in Google Scholar
[
Banthia, N., & Trottier, J. F. (1991). Deformed steel fiber-cementitious matrix bond under impact. Cement and Concrete Research, 21(1), 158–168. https://doi.org/10.1016/0008-8846(91)90042-G.10.1016/0008-8846(91)90042-G
]Search in Google Scholar
[
Bartos, P. (1981). Review paper: Bond in fibre reinforced cements and concretes. International Journal of Cement Composites and Lightweight Concrete, 3(3), 159–177. https://doi.org/10.1016/0262-5075(81)90049-X.10.1016/0262-5075(81)90049-X
]Search in Google Scholar
[
Basheer, P. A. M. (2002). Monitoring electrical resistance of concretes containing alternative cementitious materials to assess their resistance to chloride penetration. 24, 437–449.10.1016/S0958-9465(01)00075-0
]Search in Google Scholar
[
Beglarigale, A., & Yazici, H. (2015). Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar. Construction and Building Materials, 75, 255–265. https://doi.org/10.1016/j.conbuildmat.2014.11.037.10.1016/j.conbuildmat.2014.11.037
]Search in Google Scholar
[
Benjamin A., G. (2006). Material Property Characterization of Ultra-High Performance Concrete. Fhwa, FHWA-HRT-06-103, 186.
]Search in Google Scholar
[
Biswas, R., & Rai, B. (2020). Effect of cementing efficiency factor on the mechanical properties of concrete incorporating silica fume. Journal of Structural Integrity and Maintenance, 5(3), 190–203. https://doi.org/10.1080/24705314.2020.1765269.10.1080/24705314.2020.1765269
]Search in Google Scholar
[
Biswas, R., Rai, B., & Samui, P. (2021). Compressive strength prediction model of high-strength concrete with silica fume by destructive and non-destructive technique. Innovative Infrastructure Solutions, 6(2), 41062. https://doi.org/10.1007/s41062-020-00447-z.10.1007/s41062-020-00447-z
]Search in Google Scholar
[
Blais, P. Y., & Couture, M. (1999). Precast, Prestressed Pedestrian Bridge — World’s First Reactive. PCI Journal, 44(5), 60–71.10.15554/pcij.09011999.60.71
]Search in Google Scholar
[
Blazy, J., & Blazy, R. (2021). Polypropylene fiber reinforced concrete and its application in creating architectural forms of public spaces. Case Studies in Construction Materials, 14, e00549. https://doi.org/10.1016/j.cscm.2021.e00549.10.1016/j.cscm.2021.e00549
]Search in Google Scholar
[
Bošnjak, J., Ožbolt, J., & Hahn, R. (2013). Permeability measurement on high strength concrete without and with polypropylene fibers at elevated temperatures using a new test setup. Cement and Concrete Research, 53, 104–111. https://doi.org/10.1016/j.cemconres.2013.06.005.10.1016/j.cemconres.2013.06.005
]Search in Google Scholar
[
Brouwers, H. J. H., & Radix, H. J. (2005). Self-compacting concrete: Theoretical and experimental study. Cement and Concrete Research, 35(11), 2116–2136. https://doi.org/10.1016/j.cemconres.2005.06.002.10.1016/j.cemconres.2005.06.002
]Search in Google Scholar
[
Çakır, Ö., & Aköz, F. (2008). Effect of curing conditions on the mortars with and without GGBFS. Construction and Building Materials, 22(3), 308–314. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2006.08.013.10.1016/j.conbuildmat.2006.08.013
]Search in Google Scholar
[
Chan, Y. W., & Chu, S. H. (2004). Effect of silica fume on steel fiber bond characteristics in reactive powder concrete. Cement and Concrete Research, 34(7), 1167–1172. https://doi.org/10.1016/j.cemconres.2003.12.023.10.1016/j.cemconres.2003.12.023
]Search in Google Scholar
[
Chan, Y. W., & Li, V. C. (1997). Effects of transition zone densification on fiber/cement paste bond strength improvement. Advanced Cement Based Materials, 5(1), 8–17. https://doi.org/10.1016/S1065-7355(97)90010-9.10.1016/S1065-7355(97)90010-9
]Search in Google Scholar
[
Chanvillard, G., & Aïtcin, P.-C. (1996). Pull-out behavior of corrugated steel fibers. Advanced Cement Based Materials, 4(1), 28–41. https://doi.org/10.1016/s1065-7355(96)90060-7.10.1016/S1065-7355(96)90060-7
]Search in Google Scholar
[
Cheng, A., Huang, R., Wu, J. K., & Chen, C. H. (2005). Influence of GGBS on durability and corrosion behavior of reinforced concrete. Materials Chemistry and Physics. https://doi.org/10.1016/j.matchemphys.2005.03.043.10.1016/j.matchemphys.2005.03.043
]Search in Google Scholar
[
Deng, F., He, Y., Zhou, S., Yu, Y., Cheng, H., & Wu, X. (2018). Compressive strength prediction of recycled concrete based on deep learning. Construction and Building Materials, 175, 562–569. https://doi.org/10.1016/J.CONBUILDMAT.2018.04.169.10.1016/j.conbuildmat.2018.04.169
]Search in Google Scholar
[
Diamond, S., & Sahu, S. (2006). Densified silica fume: Particle sizes and dispersion in concrete. Materials and Structures/Materiaux et Constructions, 39(9), 849–859. https://doi.org/10.1617/s11527-006-9087-y.10.1617/s11527-006-9087-y
]Search in Google Scholar
[
Ding, Y., Zhang, C., Cao, M., Zhang, Y., & Azevedo, C. (2016). Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire. Construction and Building Materials, 113, 456–469. https://doi.org/10.1016/j.conbuildmat.2016.03.070.10.1016/j.conbuildmat.2016.03.070
]Search in Google Scholar
[
Dowd, W. M., & Dauriac, C. E. (1998). Reactive powder concrete. Construction Specifier, 51(12), 47–52.
]Search in Google Scholar
[
El-Dieb, A. S. (2009). Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers. Materials and Design, 30(10), 4286–4292. https://doi.org/10.1016/j.matdes.2009.04.024.10.1016/j.matdes.2009.04.024
]Search in Google Scholar
[
El-Helou RG, M. C. and C. G. (2014). Ultra-High Performance Fiber-Reinforced Concrete: Extensive Material Characterization, Model Validation, and Structural Simulations. Presentation at ACI Fall 2014 Convention, Washington, DC.
]Search in Google Scholar
[
Elchalakani, M., Aly, T., & Abu-Aisheh, E. (2014). Sustainable concrete with high volume GGBFS to build Masdar City in the UAE. Case Studies in Construction Materials, 1, 10–24. https://doi.org/10.1016/j.cscm.2013.11.001.10.1016/j.cscm.2013.11.001
]Search in Google Scholar
[
EN 14889-2. (2004). Fibres for concrete Part 2: Polymer fibres - Definition, specification and conformity.
]Search in Google Scholar
[
Fehling, E., Schmidt, M., & Stuerwald, S. (2008). Second International Symposium on Ultra High Performance Concrete. Second International Symposium on Ultra High Performance Concrete, 902.
]Search in Google Scholar
[
Felekoǧlu, B., Türkel, S., & Baradan, B. (2007). Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete. Building and Environment, 42(4), 1795–1802. https://doi.org/10.1016/j.buildenv.2006.01.012.10.1016/j.buildenv.2006.01.012
]Search in Google Scholar
[
Feng, J., Sun, W. W., Wang, X. M., & Shi, X. Y. (2014). Mechanical analyses of hooked fiber pullout performance in ultra-high-performance concrete. Construction and Building Materials, 69, 403–410. https://doi.org/10.1016/j.conbuildmat.2014.07.049.10.1016/j.conbuildmat.2014.07.049
]Search in Google Scholar
[
Feret, R. (1892). On the compactness of hydraulic mortars. Memoirs and documents relating to the art of constructions at the service of the engineer. Annales Des Ponts and Chaussées, 2nd semest, 5–161.
]Search in Google Scholar
[
Ganesh, B. K., & Sree, R. K. V. (2000). Efficiency of GGBS in concrete. Cement and Concrete Research, 30(7), 1031–1036.10.1016/S0008-8846(00)00271-4
]Search in Google Scholar
[
Ganesh, P., & Murthy, A. R. (2019). Tensile behaviour and durability aspects of sustainable ultra-high performance concrete incorporated with GGBS as cementitious material. Construction and Building Materials, 197, 667–680. https://doi.org/10.1016/j.conbuildmat.2018.11.240.10.1016/j.conbuildmat.2018.11.240
]Search in Google Scholar
[
Ghafari, E., Costa, H., Julio, E., Portugal, A., & Duraes, L. (2012). Optimization of UHPC by adding nanomaterials. In Proceedings of the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials. Kassel, Germany, 71–78.
]Search in Google Scholar
[
Ghafari, E., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2014). The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete. Materials and Design, 59(January), 1–9. https://doi.org/10.1016/j.matdes.2014.02.051.10.1016/j.matdes.2014.02.051
]Search in Google Scholar
[
Gholampour, A., & Ozbakkaloglu, T. (2017). Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag. Journal of Cleaner Production, 162, 1407–1417. https://doi.org/10.1016/j.jclepro.2017.06.087.10.1016/j.jclepro.2017.06.087
]Search in Google Scholar
[
Granger, S., Loukili, A., Pijaudier-Cabot, G., & Chanvillard, G. (2007). Experimental characterization of the self-healing of cracks in an ultra high performance cementitious material: Mechanical tests and acoustic emission analysis. Cement and Concrete Research, 37(4), 519–527. https://doi.org/10.1016/j.cemconres.2006.12.005.10.1016/j.cemconres.2006.12.005
]Search in Google Scholar
[
Gray, R. J. (1983). Experimental techniques for measuring fibre/matrix interfacial bond shear strength. International Journal of Adhesion and Adhesives, 3(4), 197–202. https://doi.org/10.1016/0143-7496(83)90094-5.10.1016/0143-7496(83)90094-5
]Search in Google Scholar
[
Gray, R. J., & Johnston, C. D. (1987). The influence of fibre-matrix interfacial bond strength on the mechanical properties of steel fibre reinforced mortars. International Journal of Cement Composites and Lightweight Concrete, 9(1), 43–55. https://doi.org/10.1016/0262-5075(87)90036-4.10.1016/0262-5075(87)90036-4
]Search in Google Scholar
[
Graybeal B.A. (2006). Material Property Characterization of Ultra-High Performance Concrete. Fhwa, August.
]Search in Google Scholar
[
Graybeal, B. A., & Russel, H. G. (2013). Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community. Publication No. FHWA-HRT-13-060. June, 176.
]Search in Google Scholar
[
Han, S. H., Oh, H. J., & Kim, S. S. (2014). Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites. Composites Part B: Engineering, 60, 98–105. https://doi.org/10.1016/j.compositesb.2013.12.069.10.1016/j.compositesb.2013.12.069
]Search in Google Scholar
[
Harish, K. V., Dattatreya, J. K., & Neelamegam, M. (2013). Experimental investigation and analytical modeling of the σ-ε Characteristics in compression of heat-treated ultra-high strength mortars produced from conventional materials. Construction and Building Materials, 49, 781–796. https://doi.org/10.1016/j.conbuildmat.2013.08.068.10.1016/j.conbuildmat.2013.08.068
]Search in Google Scholar
[
Hassan, A. M. T., Jones, S. W., & Mahmud, G. H. (2012). Experimental test methods to determine the uniaxial tensile and compressive behaviour of Ultra High Performance Fibre Reinforced Concrete(UHPFRC). Construction and Building Materials, 37, 874–882. https://doi.org/10.1016/j.conbuildmat.2012.04.030.10.1016/j.conbuildmat.2012.04.030
]Search in Google Scholar
[
Heinz, D., & Ludwig, H.-M. (2004). Heat Treatment and the Risk of DEF Delayed Ettringite Formation in UHPC. International Symposium on Ultra High Performance Concrete, 717–730.
]Search in Google Scholar
[
Herold, G., & Muller, H. (2004). Measurement of porosity of ultra-high strength fibre reinforced concrete. In Proceedings of the International Symposium on Ultra-High Performance Concrete, 685–694.
]Search in Google Scholar
[
Hoang, A. Le, & Fehling, E. (2017). Numerical analysis of circular steel tube confined UHPC stub columns. Computers and Concrete, 19(3), 263–273. https://doi.org/10.12989/cac.2017.19.3.263.10.12989/cac.2017.19.3.263
]Search in Google Scholar
[
Huang, C.-H., Wu, C.-H., Lin, S.-K., & Yen, T. (2019). Effect of Slag Particle Size on Fracture Toughness of Concrete. Applied Sciences, 9(4). https://doi.org/10.3390/app9040805.10.3390/app9040805
]Search in Google Scholar
[
Huang, W., Kazemi-Kamyab, H., Sun, W., & Scrivener, K. (2017). Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC. Materials & Design, 121, 36–46. https://doi.org/https://doi.org/10.1016/j.matdes.2017.02.052.10.1016/j.matdes.2017.02.052
]Search in Google Scholar
[
Jin, F., Gu, K., & Al-Tabbaa, A. (2015). Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste. Cement and Concrete Composites, 57, 8–16, https://doi.org/https://doi.org/10.1016/j.cemconcomp.2014.10.007.10.1016/j.cemconcomp.2014.10.007
]Search in Google Scholar
[
Kanda, T., & Li, V. C. (1998). Interface Property and Apparent Strength of High-Strength Hydrophilic Fiber in Cement Matrix. Journal of Materials in Civil Engineering, 10(1), 5–13. https://doi.org/10.1061/(asce)0899-1561(1998)10:1(5).10.1061/(ASCE)0899-1561(1998)10:1(5)
]Search in Google Scholar
[
Kang, S. T., & Kim, J. K. (2011). The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC). Cement and Concrete Research, 41(10), 1001–1014. https://doi.org/10.1016/j.cemconres.2011.05.009.10.1016/j.cemconres.2011.05.009
]Search in Google Scholar
[
Khan, S. M., & Ahmad, J. (2018). Mechanical Properties of Steel Fiber Reinforced Self-Compacting Concrete : A Review.
]Search in Google Scholar
[
Kim, J. H. J., Park, C. G., Lee, S. W., Lee, S. W., & Won, J. P. (2008). Effects of the geometry of recycled PET fiber reinforcement on shrinkage cracking of cement-based composites. Composites Part B: Engineering, 39(3), 442–450. https://doi.org/10.1016/j.compositesb.2007.05.001.10.1016/j.compositesb.2007.05.001
]Search in Google Scholar
[
Koukolík, P., Vítek, J. L., Brož, R., Coufal, R., Kalný, M., Komanec, J., & Kvasnička, V. (2015). Construction of the First Footbridge Made of UHPC in the Czech Republic. Advanced Materials Research, 1106, 8–13. https://doi.org/10.4028/www.scientific.net/amr.1106.8.10.4028/www.scientific.net/AMR.1106.8
]Search in Google Scholar
[
Kumar, A., Bishnoi, S., & Scrivener, K. L. (2012). Modelling early age hydration kinetics of alite. Cement and Concrete Research, 42(7), 903–918. https://doi.org/10.1016/j.cemconres.2012.03.003.10.1016/j.cemconres.2012.03.003
]Search in Google Scholar
[
Kumar, S., & Rai, B. (2021). Durability performance and microstructure of binary blended high-performance concrete. Innovative Infrastructure Solutions, 6(3), 152. https://doi.org/10.1007/s41062-021-00525-w.10.1007/s41062-021-00525-w
]Search in Google Scholar
[
Lavanya Prabha, S. (2010). Study on Stress-Strain Properties of Reactive Powder Concrete Under Uniaxial Compression. International Journal of Engineering Science and Technology, 2(11), 6408–6416.
]Search in Google Scholar
[
Le Hoang, A., & Fehling, E. (2017). Analysis of circular steel tube confined UHPC stub columns. Steel and Composite Structures, 23(6), 669–682. https://doi.org/10.12989/scs.2017.23.6.669.
]Search in Google Scholar
[
Lee, G., Han, D., Han, M. C., Han, C. G., & Son, H. J. (2012). Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete. Construction and Building Materials, 34, 313–320. https://doi.org/10.1016/j.conbuildmat.2012.02.015.10.1016/j.conbuildmat.2012.02.015
]Search in Google Scholar
[
Lei Voo, Y., & Foster, S. J. (2010). Characteristics of ultra-high performance “ductile” concrete and its impact on sustainable construction. IES Journal Part A: Civil and Structural Engineering, 3(3), 168–187. https://doi.org/10.1080/19373260.2010.492588.10.1080/19373260.2010.492588
]Search in Google Scholar
[
Li, B., Chi, Y., Xu, L., Shi, Y., & Li, C. (2018). Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete. Construction and Building Materials, 191, 80–94. https://doi.org/10.1016/j.conbuildmat.2018.09.202.10.1016/j.conbuildmat.2018.09.202
]Search in Google Scholar
[
Li, M., & Li, V. C. (2013). Rheology, fiber dispersion, and robust properties of engineered cementitious composites. Materials and Structures/Materiaux et Constructions, 46(3), 405–420. https://doi.org/10.1617/s11527-012-9909-z.10.1617/s11527-012-9909-z
]Search in Google Scholar
[
Li, V. (1997). Interface Property Characterization and Strengthening Mechanisms in Fiber Reinforced Cement Based Composites. Advanced Cement Based Materials, 6(1), 1–20. https://doi.org/10.1016/s1065-7355(97)00004-7.10.1016/S1065-7355(97)00004-7
]Search in Google Scholar
[
Li, W., Huang, Z., Cao, F., Sun, Z., & Shah, S. P. (2015). Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix. Construction and Building Materials, 95, 366–374. https://doi.org/10.1016/j.conbuildmat.2015.05.137.10.1016/j.conbuildmat.2015.05.137
]Search in Google Scholar
[
Liu, J. C., & Tan, K. H. (2018). Mechanism of PVA fibers in mitigating explosive spalling of engineered cementitious composite at elevated temperature. Cement and Concrete Composites, 93, 235–245. https://doi.org/10.1016/j.cemconcomp.2018.07.015.10.1016/j.cemconcomp.2018.07.015
]Search in Google Scholar
[
Liu, J., Tang, K., Qiu, Q., Pan, D., Lei, Z., & Xing, F. (2014). Experimental investigation on pore structure characterization of concrete exposed to water and chlorides. In Materials (Vol. 6, Issue 9, pp. 6646–6659). https://doi.org/10.3390/ma7096646.10.3390/ma7096646545614028788204
]Search in Google Scholar
[
Liu, X., Ye, G., De Schutter, G., Yuan, Y., & Taerwe, L. (2008). On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement paste. Cement and Concrete Research, 38(4), 487–499. https://doi.org/10.1016/j.cemconres.2007.11.010.10.1016/j.cemconres.2007.11.010
]Search in Google Scholar
[
Lowke, D., Stengel, T., Schießl, P., & Gehlen, C. (2012). Control of Rheology, Strength and Fibre Bond of UHPC with Additions–Effect of Packing Density and Addition Type. Hipermat, 215.
]Search in Google Scholar
[
Mandel, J. A., Wei, S., & Said, S. (1987). Studies of the Properties of the Fiber-Matrix Interface in Steel Fiber Reinforced Mortar. ACI Materials Journal, 84(2), 101–109. https://doi.org/10.14359/1815.10.14359/1815
]Search in Google Scholar
[
Markovic, I. (2006). High-performance hybrid-fibre concrete: development and utilization. Technische Universiteit Delft, The Netherlands.
]Search in Google Scholar
[
Martys, N. S., & Ferraris, C. F. (1997). Capillary transport in mortars and concrete. Cement and Concrete Research. https://doi.org/10.1016/S0008-8846(97)00052-5.10.1016/S0008-8846(97)00052-5
]Search in Google Scholar
[
Mazzucco, G., Majorana, C. E., & Salomoni, V. A. (2015). Numerical simulation of polypropylene fibres in concrete materials under fire conditions. Computers and Structures, 154, 17–28. https://doi.org/10.1016/j.compstruc.2015.03.012.10.1016/j.compstruc.2015.03.012
]Search in Google Scholar
[
Medina, N. F., Medina, D. F., Hernández-Olivares, F., & Navacerrada, M. A. (2017). Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling. Construction and Building Materials, 144, 563–573. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.03.196.10.1016/j.conbuildmat.2017.03.196
]Search in Google Scholar
[
Mehta, P. K. (1983). Pozzolanic and Cementitious Byproducts As Mineral Admixtures for Concrete - a Critical Review. Publication SP - American Concrete Institute, 1, 1–46.
]Search in Google Scholar
[
Metin, I., Kemalettin, Y., Mansur, S., & Mehmet, S. (2011). Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase. Construction and Building Materials, 25(1), 61–68.10.1016/j.conbuildmat.2010.06.056
]Search in Google Scholar
[
Missemer, L., Ouedraogo, E., Malecot, Y., Clergue, C., & Rogat, D. (2019). Fire spalling of ultra-high performance concrete: From a global analysis to microstructure investigations. Cement and Concrete Research, 115, 207–219. https://doi.org/10.1016/j.cemconres.2018.10.005.10.1016/j.cemconres.2018.10.005
]Search in Google Scholar
[
Naaman, A. E. (2003). Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites. Journal of Advanced Concrete Technology, 1(3), 241–252. https://doi.org/10.3151/jact.1.241.10.3151/jact.1.241
]Search in Google Scholar
[
Naaman, A. E., Namur, G. G., Alwan, J. M., & Najm, H. S. (1991). Fiber Pullout and Bond Slip. I: Analytical Study. Journal of Structural Engineering, 117(9), 2769–2790. https://doi.org/10.1061/(asce)0733-9445(1991)117:9(2769).10.1061/(ASCE)0733-9445(1991)117:9(2769)
]Search in Google Scholar
[
Naik, D. L., Sharma, A., Chada, R. R., Kiran, R., & Sirotiak, T. (2019). Modified pullout test for indirect characterization of natural fiber and cementitious matrix interface properties. Construction and Building Materials, 208, 381–393. https://doi.org/10.1016/j.conbuildmat.2019.03.021.10.1016/j.conbuildmat.2019.03.021
]Search in Google Scholar
[
Nammur, G., & Naaman, A. E. (1989). Bond stress model for fiber reinforced concrete based on bond stress-slip relationship. ACI Materials Journal, 86(1), 45–57. https://doi.org/10.14359/1845.10.14359/1845
]Search in Google Scholar
[
National, G., & Pillars, H. (2005). CHARACTERIZATION OF THE BEHAVIOR OF ULTRA-HIGH PERFORMANCE CONCRETE Benjamin.
]Search in Google Scholar
[
Neville, A., & Aïtcin, P. C. (1998). High performance concrete - An overview. Materials and Structures/Materiaux et Constructions, 31(2), 111–117. https://doi.org/10.1007/bf02486473.10.1007/BF02486473
]Search in Google Scholar
[
Nguyen, K., Freytag, B., Ralbovsky, M., & Rio, O. (2015). Assessment of serviceability limit state of vibrations in the UHPFRC-Wild bridge through an updated FEM using vehicle-bridge interaction. Computers and Structures, 156, 29–41. https://doi.org/10.1016/j.compstruc.2015.04.001.10.1016/j.compstruc.2015.04.001
]Search in Google Scholar
[
O’Neil, E. F., Neeley, B. D., & Cargile, J. D. (2001). Tensile properties of very high-strength Concrete for penetration Resistant structures. Shock and Vibration.
]Search in Google Scholar
[
Odler, I., & Rößler, M. (1985). Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydration. Cement and Concrete Research, 15(3), 401–410. https://doi.org/https://doi.org/10.1016/0008-8846(85)90113-9.10.1016/0008-8846(85)90113-9
]Search in Google Scholar
[
Oh, B. H., Park, D. G., Kim, J. C., & Choi, Y. C. (2005). Experimental and theoretical investigation on the postcracking inelastic behavior of synthetic fiber reinforced concrete beams. Cement and Concrete Research, 35(2), 384–392. https://doi.org/10.1016/j.cemconres.2004.07.019.10.1016/j.cemconres.2004.07.019
]Search in Google Scholar
[
Orange, G., Dugat, J., & Acker, P. (1999). A new generation of UHP concrete: Ductal®. Damage resistance and micromechanical analysis. Proc. of the 3d Int. RILEM Workshop, 101–111. https://books.google.fr/books?id=LSlfn0kI0u0C&pg=PA101&lpg=PA101&dq=A+new+generation+of+UHP+concrete:+Ductal®&source=bl&ots=uXqiFGUMbn&sig=ACfU3U2Ff24mUDOA9YaCgzvZpY4nwmHEJg&hl=en&sa=X&ved=2ahUKEwiSISkxqboAhUkz4UKHcVkCDMQ6AEwBHoECAsQAQ#v=onepage&q=A new.
]Search in Google Scholar
[
Ozawa, M., Subedi Parajuli, S., Uchida, Y., & Zhou, B. (2019). Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material. Construction and Building Materials, 206, 219–225. https://doi.org/10.1016/j.conbuildmat.2019.02.056.10.1016/j.conbuildmat.2019.02.056
]Search in Google Scholar
[
Özbay, E., Erdemir, M., & Durmuş, H. İ. (2016). Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review. Construction and Building Materials, 105, 423–434. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.12.153.10.1016/j.conbuildmat.2015.12.153
]Search in Google Scholar
[
Ozyildirim, C. (2011). Evaluation of Fiber-Reinforced Concrete. Evaluation of Fiber-Reinforced Concrete.
]Search in Google Scholar
[
Pal, S. C., Mukherjee, A., & Pathak, S. R. (2003). Investigation of hydraulic activity of ground granulated blast furnace slag in concrete. Cement and Concrete Research, 33(9), 1481–1486. https://doi.org/10.1016/S0008-8846(03)00062-0.10.1016/S0008-8846(03)00062-0
]Search in Google Scholar
[
Piérard, J., Donms, B., & Cauberg, N. (2012). Evaluation of durability parameters of UHPC using accelerated lab tests. Proceedings of Hipermat 2012 3rd International Symposium On UHPC and Nanotechnology For High Performance Construction Materials, 371–376.
]Search in Google Scholar
[
Rai, B., & Singh, N. K. (2021). Statistical and experimental study to evaluate the variability and reliability of impact strength of steel-polypropylene hybrid fiber reinforced concrete. Journal of Building Engineering, 44(July), 102937. https://doi.org/10.1016/j.jobe.2021.102937.10.1016/j.jobe.2021.102937
]Search in Google Scholar
[
Rao, G. A. (2003). Investigations on the performance of silica fume-incorporated cement pastes and mortars. Cement and Concrete Research, 33(11), 1765–1770. https://doi.org/https://doi.org/10.1016/S0008-8846(03)00171-6.10.1016/S0008-8846(03)00171-6
]Search in Google Scholar
[
Rashad, A. M., & Sadek, D. M. (2017). An investigation on Portland cement replaced by high-volume GGBS pastes modified with micro-sized metakaolin subjected to elevated temperatures. International Journal of Sustainable Built Environment, 6(1), 91–101. https://doi.org/https://doi.org/10.1016/j.ijsbe.2016.10.002.10.1016/j.ijsbe.2016.10.002
]Search in Google Scholar
[
Rebentrost M., W. G. (2008). Experience and applications of ultra-high performance concrete in Asia. Proceedings of the Second International Symposium on Ultra High Performance Concrete, 11.
]Search in Google Scholar
[
Reda, M. M., Shrive, N. G., & Gillott, J. E. (1999). Microstructural investigation of innovative UHPC. Cement and Concrete Research, 29(3), 323–329. https://doi.org/10.1016/S0008-8846(98)00225-7.10.1016/S0008-8846(98)00225-7
]Search in Google Scholar
[
Richard, P., & Cheyrezy, M. (1995). Composition of reactive powder concretes. Cement and Concrete Research, 25(7), 1501–1511. https://doi.org/https://doi.org/10.1016/0008-8846(95)00144-2.10.1016/0008-8846(95)00144-2
]Search in Google Scholar
[
Ríos, J. D., Cifuentes, H., Leiva, C., García, C., & Alba, M. D. (2018). Behavior of High-Strength Polypropylene Fiber-Reinforced Self-Compacting Concrete Exposed to High Temperatures. Journal of Materials in Civil Engineering, 30(11), 04018271. https://doi.org/10.1061/(asce)mt.1943-5533.0002491.10.1061/(ASCE)MT.1943-5533.0002491
]Search in Google Scholar
[
Ríos, J. D., Cifuentes, H., Leiva, C., & Seitl, S. (2019). Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography. Cement and Concrete Research, 119, 77–88. https://doi.org/10.1016/j.cemconres.2019.02.015.10.1016/j.cemconres.2019.02.015
]Search in Google Scholar
[
Ríos, J. D., Cifuentes, H., Yu, R. C., & Ruiz, G. (2017). Probabilistic flexural fatigue in plain and fiber-reinforced concrete. Materials, 10(7). https://doi.org/10.3390/ma10070767.10.3390/ma10070767555181028773123
]Search in Google Scholar
[
Rößler, M., & Odler, I. (1985). Investigations on the relationship between porosity, structure and strength of hydrated portland cement pastes I. Effect of porosity. Cement and Concrete Research, 15(2), 320–330. https://doi.org/10.1016/0008-8846(85)90044-4.10.1016/0008-8846(85)90044-4
]Search in Google Scholar
[
ROUGEAU, P., & B.B. (2004). Ultra-high-performance concrete with ultrafine particles other than silica fume. In Proceedings of the fib Symposium 2004 - Concrete Structures: The Challenge of Creativity (Issue 3).
]Search in Google Scholar
[
Rougeau, P., & Borys, B. (2004). Ultra high performance concrete with ultrafine particles other than silica fume. Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, 213-226.
]Search in Google Scholar
[
Roy, D. M., & Idorn, G. M. (1982). Hydration, Structure, and Properties of Blast Furnace Slag Cements, Mortars, and Concrete. J Am Concr Inst, V 79(N 6), 444–457. https://doi.org/10.14359/10919.10.14359/10919
]Search in Google Scholar
[
Schmidt, G. A., Jungclaus, J. H., Ammann, C. M., Bard, E., Braconnot, P., Crowley, T. J., Delaygue, G., Joos, F., Krivova, N. A., Muscheler, R., Otto-Bliesner, B. L., Pongratz, J., Shindell, D. T., Solanki, S. K., Steinhilber, F., & Vieira, L. E. A. (2012). Climate forcing reconstructions for use in PMIP simulations of the Last Millennium (v1.1). Geoscientific Model Development, 5(1), 185–191. https://doi.org/10.5194/gmd-5-185-2012.10.5194/gmd-5-185-2012
]Search in Google Scholar
[
Schmidt, G. A., Shindell, D. T., Miller, R. L., Mann, M. E., & Rind, D. (2004). General circulation modelling of Holocene climate variability. Quaternary Science Reviews, 23(20-22 SPEC. ISS.), 2167–2181. https://doi.org/10.1016/j.quascirev.2004.08.005.10.1016/j.quascirev.2004.08.005
]Search in Google Scholar
[
Schmidt, M., & Teichmann, T. (2007). Development of an ultra high performance concrete for the company SW Umwelttechnik. Final report, Kassel, Germany.
]Search in Google Scholar
[
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004). The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. Interface Science, 12(4), 411–421. https://doi.org/10.1023/B:INTS.0000042339.92990.4c.10.1023/B:INTS.0000042339.92990.4c
]Search in Google Scholar
[
Shannag, M. J., Brincker, R., & Hansen, W. (1996). Interfacial (fiber-matrix) properties of high-strength mortar (150 MPa) from fiber pullout. ACI Materials Journal, 93(5), 480–486. https://doi.org/10.14359/9853.10.14359/9853
]Search in Google Scholar
[
Shannag, M. J., Brincker, R., & Hansen, W. (1997). Pullout behavior of steel fibers from cement-based composites. Cement and Concrete Research, 27(6), 925–936. https://doi.org/10.1016/S0008-8846(97)00061-6.10.1016/S0008-8846(97)00061-6
]Search in Google Scholar
[
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015). A review on ultra high performance concrete: Part I. Raw materials and mixture design. Construction and Building Materials, 101, 741–751. https://doi.org/10.1016/j.conbuildmat.2015.10.088.10.1016/j.conbuildmat.2015.10.088
]Search in Google Scholar
[
Shi, T., Wei, S., Shen, J., & Ye, Q. (2012). Preparation of slag reactive powder concrete and the research on its resistance to chloride ion permeability. Advanced Materials Research, 391–392, 1189–1194. https://doi.org/10.4028/www.scientific.net/AMR.391-392.1189.10.4028/www.scientific.net/AMR.391-392.1189
]Search in Google Scholar
[
Siddique, R., & Khan, M. I. (2011). Supplementary cementing materials. In Engineering Materials. https://doi.org/10.1016/B978-0-08-102616-8.00003-4.10.1016/B978-0-08-102616-8.00003-4
]Search in Google Scholar
[
Singh, S., Shukla, A., & Brown, R. (2004). Pullout behavior of polypropylene fibers from cementitious matrix. Cement and Concrete Research, 34(10), 1919–1925. https://doi.org/10.1016/j.cemconres.2004.02.014.10.1016/j.cemconres.2004.02.014
]Search in Google Scholar
[
Snellings, R., Mertens, G., & Elsen, J. (2012). Supplementary cementitious materials. Reviews in Mineralogy and Geochemistry, 74(May), 211–278. https://doi.org/10.2138/rmg.2012.74.6.10.2138/rmg.2012.74.6
]Search in Google Scholar
[
Sohaib, N., Seemab, F., Sana, G., & Mamoon, R. (2018). Using Polypropylene Fibers in Concrete to achieve maximum strength. https://doi.org/10.15224/978-1-63248-145-0-36.10.15224/978-1-63248-145-0-36
]Search in Google Scholar
[
Sojobi, A. O. (2016). Evaluation of the performance of eco-friendly lightweight interlocking concrete paving units incorporating sawdust wastes and laterite. Cogent Engineering, 3(1). https://doi.org/10.1080/23311916.2016.1255168.10.1080/23311916.2016.1255168
]Search in Google Scholar
[
Soliman, N. A., & Tagnit-Hamou, A. (2016). Development of ultra-high-performance concrete using glass powder – Towards ecofriendly concrete. Construction and Building Materials, 125, 600–612, https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.08.073.10.1016/j.conbuildmat.2016.08.073
]Search in Google Scholar
[
Spasojevic, A. (2008). Structural Implications of Ultra-Hight Performance Fibre-Reinforced Concrete in Bridge Design. 19, 212–217. https://doi.org/10.5075/epfl-thesis-4051.
]Search in Google Scholar
[
Stengel, T. (2009). Effect of Surface Roughness on the Steel Fibre Bonding in Ultra High Performance Concrete (UHPC). Nanotechnology in Construction 3, 371–376. https://doi.org/10.1007/978-3-642-00980-8_50.10.1007/978-3-642-00980-8_50
]Search in Google Scholar
[
T., Z., & W, K. (2016). Polyolefin fibres used in cementitious composites – manufacturing, properties and application. Czasopismo Techniczne, 2016(Budownictwo Zeszyt 3-B (9) 2016), 155–177. https://doi.org/10.4467/2353737XCT.16.223.5972.
]Search in Google Scholar
[
Tafraoui, A., Escadeillas, G., Lebaili, S., & Vidal, T. (2009). Metakaolin in the formulation of UHPC. Construction and Building Materials, 23(2), 669–674. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2008.02.018.10.1016/j.conbuildmat.2008.02.018
]Search in Google Scholar
[
Tafraoui, A., Escadeillas, G., & Vidal, T. (2016). Durability of the Ultra High Performances Concrete containing metakaolin. Construction and Building Materials, 112, 980–987. https://doi.org/10.1016/j.conbuildmat.2016.02.169.10.1016/j.conbuildmat.2016.02.169
]Search in Google Scholar
[
Tai, Y. S., & El-Tawil, S. (2017). High loading-rate pullout behavior of inclined deformed steel fibers embedded in ultra-high performance concrete. Construction and Building Materials, 148, 204–218. https://doi.org/10.1016/j.conbuildmat.2017.05.018.10.1016/j.conbuildmat.2017.05.018
]Search in Google Scholar
[
Tai, Y. S., El-Tawil, S., & Chung, T. H. (2016). Performance of deformed steel fibers embedded in ultra-high performance concrete subjected to various pullout rates. Cement and Concrete Research, 89, 1–13. https://doi.org/10.1016/j.cemconres.2016.07.013.10.1016/j.cemconres.2016.07.013
]Search in Google Scholar
[
Tanyildizi, H., & Çevik, A. (2010). Modeling mechanical performance of lightweight concrete containing silica fume exposed to high temperature using genetic programming. Construction and Building Materials, 24(12), 2612–2618. https://doi.org/10.1016/j.conbuildmat.2010.05.001.10.1016/j.conbuildmat.2010.05.001
]Search in Google Scholar
[
Tasdemir, C. (2003). Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete. Cement and Concrete Research, 33(10), 1637–1642. https://doi.org/10.1016/S0008-8846(03)00112-1.10.1016/S0008-8846(03)00112-1
]Search in Google Scholar
[
Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., & Voo, Y. L. (2012). Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay. Construction and Building Materials, 36, 538–548. https://doi.org/10.1016/j.conbuildmat.2012.06.013.10.1016/j.conbuildmat.2012.06.013
]Search in Google Scholar
[
Taylor, H. F. W. (1997). Cement chemistry. Cement Chemistry. https://doi.org/10.1680/cc.25929.10.1680/cc.25929
]Search in Google Scholar
[
Termkhajornkit, P., Nawa, T., Nakai, M., & Saito, T. (2005). Effect of fly ash on autogenous shrinkage. Cement and Concrete Research, 35(3), 473–482. https://doi.org/10.1016/j.cemconres.2004.07.010.10.1016/j.cemconres.2004.07.010
]Search in Google Scholar
[
Toutanji, H., McNeil, S., & Bayasi, Z. (1998). Chloride permeability and impact resistance of polypropylene-fiber-reinforced silica fume concrete. Cement and Concrete Research, 28(7), 961–968. https://doi.org/10.1016/S0008-8846(98)00073-8.10.1016/S0008-8846(98)00073-8
]Search in Google Scholar
[
Van Tuan, N., Ye, G., van Breugel, K., Fraaij, A. L. A., & Bui, D. D. (2011). The study of using rice husk ash to produce ultra high performance concrete. Construction and Building Materials, 25(4), 2030–2035, https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.11.046.10.1016/j.conbuildmat.2010.11.046
]Search in Google Scholar
[
Vicente, M. A., González, D. C., Mínguez, J., Tarifa, M. A., Ruiz, G., & Hindi, R. (2018). Influence of the pore morphology of high strength concrete on its fatigue life. International Journal of Fatigue, 112, 106–116. https://doi.org/10.1016/j.ijfatigue.2018.03.006.10.1016/j.ijfatigue.2018.03.006
]Search in Google Scholar
[
Vikan, H., & Justnes, H. (2007). Rheology of cementitious paste with silica fume or limestone. Cement and Concrete Research, 37(11), 1512–1517. https://doi.org/10.1016/j.cemconres.2007.08.012.10.1016/j.cemconres.2007.08.012
]Search in Google Scholar
[
Wang, C., Yang, C., Liu, F., Wan, C., & Pu, X. (2012). Preparation of Ultra-High Performance Concrete with common technology and materials. Cement and Concrete Composites, 34(4), 538–544. https://doi.org/10.1016/j.cemconcomp.2011.11.005.10.1016/j.cemconcomp.2011.11.005
]Search in Google Scholar
[
Wang, C., Zhou, S., Wang, B., … P. G.-G. and, & 2016, U. (2016). Settlement behavior and controlling effectiveness of two types of rigid pile structure embankments in high-speed railways. Geomech Eng, 11, 847–865.10.12989/gae.2016.11.6.847
]Search in Google Scholar
[
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015a). A review on ultra high performance concrete: Part II. Hydration, microstructure and properties. Construction and Building Materials, 96, 368–377. http://dx.doi.org/10.1016/j.conbuildmat.2015.10.088.10.1016/j.conbuildmat.2015.10.088
]Search in Google Scholar
[
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015b). A review on ultra high performance concrete: Part II. Hydration, microstructure and properties. Construction and Building Materials, 96, 368–377.10.1016/j.conbuildmat.2015.08.095
]Search in Google Scholar
[
Wang, X. H., Jacobsen, S., He, J. Y., Zhang, Z. L., Lee, S. F., & Lein, H. L. (2009). Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar. Cement and Concrete Research, 39(8), 701–715. https://doi.org/10.1016/j.cemconres.2009.05.002.10.1016/j.cemconres.2009.05.002
]Search in Google Scholar
[
Wang, Y., Li, V. C., & Backer, S. (1988a). Analysis of synthetic fiber pullout from a cement matrix. Bond- ing in Cementitious Composites. MRS Symposium. Proc., 114, 159–165.10.1557/PROC-114-159
]Search in Google Scholar
[
Wang, Y., Li, V. C., & Backer, S. (1988b). Modelling of fibre pull-out from a cement matrix. International Journal of Cement Composites and Lightweight Concrete, 10(3), 143–149. https://doi.org/10.1016/0262-5075(88)90002-4.10.1016/0262-5075(88)90002-4
]Search in Google Scholar
[
Werner, O. R., Scali, M. J., Rose, J. H., Aitcin, P. C., Abdun-Nur, E. A., Ashby, J. B., Bell, L. W., Best, F. J., Brenno, G. L., Butler, B. W., Call, B., Carrasquillo, R. L., Cook, J. E., Deno, D. W., & Deckman, J. T. (1987). Ground Granulated Blast-Furnace Slag As a Cementitious Constituent in Concrete. ACI Materials Journal, 84(4), 327–342. https://doi.org/10.14359/1623.10.14359/1623
]Search in Google Scholar
[
Wille, K., & Naaman, A. E. (2012). Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete. ACI Materials Journal, 109(4), 479–488. https://doi.org/10.14359/51683923.10.14359/51683923
]Search in Google Scholar
[
Wu, Z., Khayat, K. H., & Shi, C. (2017). Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete. Cement and Concrete Research, 95, 247–256. https://doi.org/10.1016/j.cemconres.2017.02.031.10.1016/j.cemconres.2017.02.031
]Search in Google Scholar
[
Wu, Z., Khayat, K. H., & Shi, C. (2018). How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC? Cement and Concrete Composites, 90, 193–201. https://doi.org/10.1016/j.cemconcomp.2018.03.021.10.1016/j.cemconcomp.2018.03.021
]Search in Google Scholar
[
Wu, Z., Khayat, K. H., & Shi, C. (2019). Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content. Cement and Concrete Research, 123. https://doi.org/10.1016/j.cemconres.2019.105786.10.1016/j.cemconres.2019.105786
]Search in Google Scholar
[
Wu, Z., Shi, C., He, W., & Wu, L. (2016). Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Construction and Building Materials, 103, 8–14. https://doi.org/10.1016/j.conbuildmat.2015.11.028.10.1016/j.conbuildmat.2015.11.028
]Search in Google Scholar
[
Wu, Z., Shi, C., & Khayat, K. H. (2016). Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC). Cement and Concrete Composites, 71, 97–109. https://doi.org/10.1016/j.cemconcomp.2016.05.005.10.1016/j.cemconcomp.2016.05.005
]Search in Google Scholar
[
Wu, Z., Shi, C., & Khayat, K. H. (2019). Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape. Composites Part B: Engineering, 174. https://doi.org/10.1016/j.compositesb.2019.107021.10.1016/j.compositesb.2019.107021
]Search in Google Scholar
[
Xie, T., Fang, C., Mohamad Ali, M. S., & Visintin, P. (2018). Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): An experimental study. Cement and Concrete Composites, 91, 156–173. https://doi.org/10.1016/j.cemconcomp.2018.05.009.10.1016/j.cemconcomp.2018.05.009
]Search in Google Scholar
[
Xue, J., Briseghella, B., Huang, F., Nuti, C., Tabatabai, H., & Chen, B. (2020). Review of ultra-high performance concrete and its application in bridge engineering. Construction and Building Materials, 260, 119844. https://doi.org/10.1016/j.conbuildmat.2020.119844.10.1016/j.conbuildmat.2020.119844
]Search in Google Scholar
[
Yan, P. Y., & Feng, J. W. (2008). Mechanical Behaviour of UHPC and UHPC Filled Steel Tubular Stub Columns. Proceedings of the International Symposium on Ultra High Performance Concrete of the Second International Symposium on Ultra High Performance Concrete, 355–364.
]Search in Google Scholar
[
Yang, J., Wang, Q., & Zhou, Y. (2017). Influence of Curing Time on the Drying Shrinkage of Concretes with Different Binders and Water-to-Binder Ratios. Advances in Materials Science and Engineering. https://doi.org/10.1155/2017/2695435.10.1155/2017/2695435
]Search in Google Scholar
[
Yang, S., Yue, X., Liu, X., & Tong, Y. (2015). Properties of self-compacting lightweight concrete containing recycled plastic particles. Construction and Building Materials, 84, 444–453, https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.03.038.10.1016/j.conbuildmat.2015.03.038
]Search in Google Scholar
[
Yazici, H., Yardimci, M. Y., Aydin, S., & Karabulut, A. Ş. (2009). Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes. Construction and Building Materials, 23(3), 1223–1231. https://doi.org/10.1016/j.conbuildmat.2008.08.003.10.1016/j.conbuildmat.2008.08.003
]Search in Google Scholar
[
Yew, M. K., Mahmud, H. Bin, Ang, B. C., & Yew, M. C. (2015). Influence of different types of polypropylene fibre on the mechanical properties of high-strength oil palm shell lightweight concrete. Construction and Building Materials, 90, 36–43. https://doi.org/10.1016/j.conbuildmat.2015.04.024.10.1016/j.conbuildmat.2015.04.024
]Search in Google Scholar
[
Yin, S., Tuladhar, R., Shi, F., Combe, M., Collister, T., & Sivakugan, N. (2015). Use of macro plastic fibres in concrete: A review. Construction and Building Materials, 93, 180–188. https://doi.org/10.1016/j.conbuildmat.2015.05.105.10.1016/j.conbuildmat.2015.05.105
]Search in Google Scholar
[
Yoo, D. Y., Lee, J. H., & Yoon, Y. S. (2013). Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites. Composite Structures, 106, 742–753. https://doi.org/10.1016/j.compstruct.2013.07.033.10.1016/j.compstruct.2013.07.033
]Search in Google Scholar
[
Yoo, D. Y., Shin, H. O., Yang, J. M., & Yoon, Y. S. (2014). Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers. Composites Part B: Engineering, 58, 122–133. https://doi.org/10.1016/j.compositesb.2013.10.081.10.1016/j.compositesb.2013.10.081
]Search in Google Scholar
[
Yoo, D. Y., & Yoon, Y. S. (2016). A Review on Structural Behavior, Design, and Application of Ultra-High-Performance Fiber-Reinforced Concrete. International Journal of Concrete Structures and Materials, 10(2), 125–142. https://doi.org/10.1007/s40069-016-0143-x.10.1007/s40069-016-0143-x
]Search in Google Scholar
[
Yoshihiro, T., & Maekawa, K. (2016). The Innovation and Application of UHPFRC Bridges in Japan. April.
]Search in Google Scholar
[
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014a). Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, 65, 140–150. https://doi.org/10.1016/j.conbuildmat.2014.04.063.10.1016/j.conbuildmat.2014.04.063
]Search in Google Scholar
[
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014b). Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC). Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2013.11.002.10.1016/j.cemconres.2013.11.002
]Search in Google Scholar
[
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2015). Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses. Cement and Concrete Composites, 55, 383–394. https://doi.org/10.1016/j.cemconcomp.2014.09.024.10.1016/j.cemconcomp.2014.09.024
]Search in Google Scholar
[
Yu, Z. R., Gao, K., An, M. Z., & Han, S. (2013). Influence of micro-structure on the strength and resistance to chloride ion permeability of reactive powder concrete. Xi’an Jianzhu Keji Daxue Xuebao/Journal of Xi’an University of Architecture and Technology, 45(1), 31–37.
]Search in Google Scholar
[
Zeiml, M., Leithner, D., Lackner, R., & Mang, H. A. (2006). How do polypropylene fibers improve the spalling behavior of in-situ concrete? Cement and Concrete Research, 36(5), 929–942. https://doi.org/10.1016/j.cemconres.2005.12.018.10.1016/j.cemconres.2005.12.018
]Search in Google Scholar
[
Zhang, D., Dasari, A., & Tan, K. H. (2018). On the mechanism of prevention of explosive spalling in ultra-high performance concrete with polymer fibers. Cement and Concrete Research, 113, 169–177. https://doi.org/10.1016/j.cemconres.2018.08.012.10.1016/j.cemconres.2018.08.012
]Search in Google Scholar
[
Zhang, D., Tan, K. H., Dasari, A., & Weng, Y. (2020). Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete. Cement and Concrete Composites, 109. https://doi.org/10.1016/j.cemconcomp.2020.103512.10.1016/j.cemconcomp.2020.103512
]Search in Google Scholar
[
Zhang, W., Min, H., Gu, X., Xi, Y., & Xing, Y. (2015). Mesoscale model for thermal conductivity of concrete. Construction and Building Materials, 98, 8–16. https://doi.org/10.1016/j.conbuildmat.2015.08.106.10.1016/j.conbuildmat.2015.08.106
]Search in Google Scholar
[
Zhang, Y., Zhang, C., Zhu, Y., Cao, J., & Shao, X. (2020). An experimental study: various influence factors affecting interfacial shear performance of UHPC-NSC. Construction and Building Materials, 236. https://doi.org/10.1016/j.conbuildmat.2019.117480.10.1016/j.conbuildmat.2019.117480
]Search in Google Scholar
[
Zhou, M., Lu, W., Song, J., & Lee, G. C. (2018). Application of Ultra-High Performance Concrete in bridge engineering. Construction and Building Materials, 186, 1256–1267. https://doi.org/10.1016/j.conbuildmat.2018.08.036.10.1016/j.conbuildmat.2018.08.036
]Search in Google Scholar
[
Zohrevand, P., & Mirmiran, A. (2011). Behavior of Ultrahigh-Performance Concrete Confined by Fiber-Reinforced Polymers. Journal of Materials in Civil Engineering, 23(12), 1727–1734. https://doi.org/10.1061/(asce)mt.1943-5533.0000324.10.1061/(ASCE)MT.1943-5533.0000324
]Search in Google Scholar
[
Zollo, R. F. (1997). Fiber-reinforced concrete: An overview after 30 years of development. Cement and Concrete Composites, 19(2), 107–122. https://doi.org/10.1016/s0958-9465(96)00046-7.10.1016/S0958-9465(96)00046-7
]Search in Google Scholar